Tsum Tsum Mini School & House Playset (Also fits Disney Ooshies) by PropHangin

Last crawled date: 3 years ago

Updated the Main Building to Version 2: this has 2mm wall thickness instead of 1mm and the swing frame is thicker. I've left the original too with 1mm wall thickness as this prints OK and looks well but is a little more delicate. I've also split the floors in to separate files and made the bedroom wall 2mm thick instead of 1mm too.
My Daughter has been collecting Tsum Tsum Minis for a while now and was quite upset that there are no playsets to play with them in. So together we designed the Cute Tsum Tsum School (Her Name). The base has the outer walls, a swing frame and a sand pit. Then there is the first floor and roof terrace complete with bedroom, bathroom (including Bath) and a swimming pool on the roof. It also fits most of her Disney Ooshies too.
The base measures 200x200 exactly and I wouldn't recommend scaling down much further than that as the Tsum Tsums may not fit through the doors and in the beds etc.
If you want to change the colour of the filament after the base has printed it will need to be paused at 2mm layer height.
This is a work in progress and I may update the thickness of the walls. They are quite thin at the minute however printed at 220 degrees in PLA for layer strength they seem fairly resilient. I will upload another file shortly with a seat for the swing and a few free standing tables and stools when I get a spare few hours.
If you print this please leave feedback so I know how it holds up in the real world.