Tripod Mount Offset for Ender 3 Bed Mount by DPS_Design

Last crawled date: 3 years, 4 months ago

Just in case there is someone else that uses the accessories on an Ender 3 Pro that I do, you'll find an issue with clearance between your bed handle mounted camera and the Bullseye light bar. So, I made this offset to compensate.
The accessories on mine:
Yes, even with the camera and all this, there is no issue with clearance above da_syggy's
Y-Axis Bar Rail Cover:https://www.thingiverse.com/thing:3476490/files
Bullseye fan mounts and ducting:https://www.thingiverse.com/thing:2759439
And my (dps_design) 100mm LED Mount Striphttps://www.thingiverse.com/thing:4637631
Ender 3 Strong Tripod Style Bed Mount by Boredom3Dhttps://www.thingiverse.com/thing:4541695
Then, this Offset attaches with 1/4 x 20 to both bed mount and to:
GoPro Tripod Mount by tmorris9https://www.thingiverse.com/thing:81333
To that I've attached GoPro Extension gpm_bar50.stl from:https://www.thingiverse.com/thing:62800/files
That connects to my (dps_design) Pi IR Camera mount:https://www.thingiverse.com/thing:4596372
Which attaches finally to jouwstrm's raspberry pi IR camera mount:https://www.thingiverse.com/thing:3541864
The holes are not threaded, but tight on a 1/4 x 20 screw. Use a nut on the backside if you need - back is hollowed out to fit a large nut if needed.
You can see from the pictures that I printed mine in total crap resolution - but it's hidden and therefore doesn't matter to me.