GrabCAD
Trapper fishing rod holder
by GrabCAD
Last crawled date: 1 year, 11 months ago
An eco friendly solution to attaching your fishing rod to suit Trapper canoes. The simple product has been designed with eco credentials in mind.
- The holder itself is made from marine grade wood, possibly varnished spruce for it's strength and the appearance ties in with the wooden detailing of Trapper canoes.
- Major metal parts like the tightening mechanism will be cast and machined aluminium for it's light weight and corrosion resistance, while screw threads and bolts will be stainless steel.
- I have used cork inserts on the main brackets to protect the canoe.
- For the main bracket I have used the under appreciated hemp fibres with an eco friendly resin. Hemp fiberglass has all the strength and benefits of common plastics and or fibre based composites but is cheaper and is a 'green' material. This will reduce the overall weight of the holder, allowing for a more stable canoe.
- I have designed this holder with minimal parts and simple assembly. it only requires a single bolt to attach the holder rotating mechanism and 2 small screws to secure the treaded wheel which closes the bracket around the hull.
Styling:
- I have tried to follow the Trapper's sweeping curves and seamless joints so that once attached the holder blends effortlessly with the canoe itself.
- By using hemp for the bracket, it can be left as a polished finish or painted to suit all the colours in the Trapper range, offering the customer more colour options.
Function
- The bracket has been shaped around the Trapper canoe hull profile. The user simply slots the bracket over the rim of the hull, inserts the provided allen key into the treaded wheel and turn until the other half of the bracket has fully closed around the rim of the hull. The bracket is now secure, but to ensure it will not come undone the user simply slots the allen key into the hole in the toothed mechanism which will hold the mechanism in place until the allen key is removed.
- To adjust the rotation from side to side there is a circular platform on top of the bracket with a disk, with the rod holder attached, which is simply bolted on to the bracket via a single nylock bolt. The user then rotates the top section by lifting up the spring pin and then relocating it into any of the 10 designated slots on the bracket.
-To adjust the angle of the rod, the user simply loosens the fastening bolt below the rod holder itself, adjusts the angle to suit then tightens the fastener again, where it is kept secure by corresponding teeth on both the bracket and fastener.
This is an all round secure, durable, light and eco-friendly fishing rod holder for the Trapper canoe range.
- The holder itself is made from marine grade wood, possibly varnished spruce for it's strength and the appearance ties in with the wooden detailing of Trapper canoes.
- Major metal parts like the tightening mechanism will be cast and machined aluminium for it's light weight and corrosion resistance, while screw threads and bolts will be stainless steel.
- I have used cork inserts on the main brackets to protect the canoe.
- For the main bracket I have used the under appreciated hemp fibres with an eco friendly resin. Hemp fiberglass has all the strength and benefits of common plastics and or fibre based composites but is cheaper and is a 'green' material. This will reduce the overall weight of the holder, allowing for a more stable canoe.
- I have designed this holder with minimal parts and simple assembly. it only requires a single bolt to attach the holder rotating mechanism and 2 small screws to secure the treaded wheel which closes the bracket around the hull.
Styling:
- I have tried to follow the Trapper's sweeping curves and seamless joints so that once attached the holder blends effortlessly with the canoe itself.
- By using hemp for the bracket, it can be left as a polished finish or painted to suit all the colours in the Trapper range, offering the customer more colour options.
Function
- The bracket has been shaped around the Trapper canoe hull profile. The user simply slots the bracket over the rim of the hull, inserts the provided allen key into the treaded wheel and turn until the other half of the bracket has fully closed around the rim of the hull. The bracket is now secure, but to ensure it will not come undone the user simply slots the allen key into the hole in the toothed mechanism which will hold the mechanism in place until the allen key is removed.
- To adjust the rotation from side to side there is a circular platform on top of the bracket with a disk, with the rod holder attached, which is simply bolted on to the bracket via a single nylock bolt. The user then rotates the top section by lifting up the spring pin and then relocating it into any of the 10 designated slots on the bracket.
-To adjust the angle of the rod, the user simply loosens the fastening bolt below the rod holder itself, adjusts the angle to suit then tightens the fastener again, where it is kept secure by corresponding teeth on both the bracket and fastener.
This is an all round secure, durable, light and eco-friendly fishing rod holder for the Trapper canoe range.
Similar models
grabcad
free
Trapper Canoes Fishing Rod Holder
... fishing rod holder competition. this design is provides a stable platform for a fishing rod by balancing the moment of the rod.
grabcad
free
Trapper Canoe Rod Holder
...rce of the springs. rubber pads prevent any damage to the canoe.
the rod holder can be manufactured using eco-plastics or metal.
grabcad
free
Rod Holder #2
...es.
the directional part is attached with a thumbscrew and allows rotation and tilt.
the main body and rod attachments are wood,
grabcad
free
Trapper Canoes Fishing Rod Holder 2.1
...reat faces which trapper can easily place their logo.
*see the attached video or youtube video which provides a 360 degree view.
grabcad
free
Trapper Canoe Fishing Rod Holder 2.2
...e milled from a single block in under half an hour.
**see the attached video or youtube video which provides a 360 degree view.
grabcad
free
Trapper Canoes Fishing Rod Holder
...this design utilizes static friction to hold it in place. the moment caused by the rods helps to secure the holder to the canoe.
grabcad
free
Trapper Canoes Fishing Rod Holder
... this design utilizes static friction to hold it in place. the moment caused by the rods helps to secure the holder to the canoe.
grabcad
free
Canoe Fishing Rod Holder
...tainless steel but did not want to have copyright infringement.
please leave a comment if you wish to know further information.
grabcad
free
Trapper fishing rod holder
.... due to the manufacturing methods available for this holder, it can easily be painted to match the current trapper colour range.
grabcad
free
SGCHL TRAPPER Rodholder
...s/bending/wire/dh2010vgp.aspx
thanks to :
andrey jasiukaitis for the fishing spinning rod
sasa petrovic for the fishing reel .
Trapper
grabcad
free
Trapper fiets
...trapper fiets
grabcad
solidworks 2021
grabcad
free
trapper
...d
this design can be made of plastic with a rubber fixing the canapaiche and system rotation with fixation effecace for handling
grabcad
free
Universal Trapper rod holder
...universal trapper rod holder
grabcad
universal trapper rod holder.
yes, i know i should write materials and so on...
grabcad
free
Trapper Canoes Fishing Rod Holder
... fishing rod holder competition. this design is provides a stable platform for a fishing rod by balancing the moment of the rod.
grabcad
free
REPLICA BLADE ENZO TRAPPER 95
...the design model is made according to the drawings.
can be used in the construction of designs or scenes.
created by solidworks.
grabcad
free
SGCHL TRAPPER Rodholder
...s/bending/wire/dh2010vgp.aspx
thanks to :
andrey jasiukaitis for the fishing spinning rod
sasa petrovic for the fishing reel .
grabcad
free
Rodholder ( Trapper Canoes)
...hining considered. buy-out hardware for low cost. alternate accessories to be added such as cell phone holder, flashlight holder.
grabcad
free
Trapper Canoe Rod Holder
...rce of the springs. rubber pads prevent any damage to the canoe.
the rod holder can be manufactured using eco-plastics or metal.
grabcad
free
Trapper Sheetmetal Rodholder
...own design.
the essence of this design is the technical principle, not the looks. but i guess most of you had already noticed! ;)
grabcad
free
Rod holder for trapper canoe
...per" rod holder can to hold fly fishing rods, that are problem for most other rod holders.
the rod holder has weight 0.8 kg
Fishing
grabcad
free
Fish
...fish grabcad fish model prepared for fishing ...
grabcad
free
Fish
...fish
grabcad
fish
grabcad
free
fishing
...fishing
grabcad
fishing
grabcad
free
Fish
...fish
grabcad
fish
grabcad
free
fish
...fish
grabcad
fish
grabcad
free
Fish
...fish
grabcad
fish
grabcad
free
Fish
...fish
grabcad
fish
grabcad
free
fish
...fish
grabcad
fish
grabcad
free
fishing
...fishing
grabcad
fishing
grabcad
free
FISH
...fish
grabcad
fish
Rod
grabcad
free
Rod
...rod
grabcad
rod
grabcad
free
rod
...rod
grabcad
rod
grabcad
free
rod
...rod
grabcad
rod
grabcad
free
rod
...rod
grabcad
rod
grabcad
free
Rod
...rod
grabcad
rod
grabcad
free
Rod
...rod
grabcad
rod
grabcad
free
Rod
...rod
grabcad
rod
grabcad
free
ROD
...rod
grabcad
rod
grabcad
free
Rod
...rod
grabcad
rod
grabcad
free
rod
...rod
grabcad
rod
Holder
grabcad
free
Holder
...holder
grabcad
holder, lamp holder
grabcad
free
holder
...holder
grabcad
holder
grabcad
free
Holder
...holder
grabcad
holder
grabcad
free
holder
...holder
grabcad
holder
grabcad
free
Holder
...holder
grabcad
holder
grabcad
free
Holder
...holder
grabcad
holder
grabcad
free
HOLDER
...holder
grabcad
holder
grabcad
free
holder
...holder
grabcad
holder
grabcad
free
Holder
...holder
grabcad
holder
grabcad
free
holder
...holder
grabcad
holder