Transmitter Tray TH9X or T9X or TARANIS to print in 3D. by GeorgeXib

Last crawled date: 3 years ago

Important:
Printing of the transmitter tray including attached STL is optimized to the type
of a printer prusa i3MK2 with the size of pad (x,y) 250x210mm.
When properly transfered the attached stl files can be printed on a 3D printer
with the minimum size of pad (bed) 240x200 mm. The weight of the
assembled tray is not higher than 250 g. (Infill percentage = 13-20%, primary
layer hight = 0,2 mm.)
The parts no. 1 and no. 4 must be print with support. By printing the other
parts the support is not necessary. Before assembly, some of the edges and
holes of the parts must be slightly cropped. A superglue can be used. The PLA
material was used by the test of 3D print of the transmitter tray. Protect from
exposure to high temperatures, especially in sunlight. The disigner is not liable
for demages caused by using the tray.