Trackimo Mount for Blade Chroma by oliasmage

Last crawled date: 3 years ago

This is a mount for attaching a Trackimo GPS tracking device to your Blade Chroma. The mount hangs below the body and attaches to the landing struts without drilling or cutting your expensive drone.
This cradle has a hole for the power button and USB charging cable. So you don't even have to remove it from your drone to charge the Trackimo.
To assemble, you will need:
(2) M4x25 bolts
(2) M4 Nylocks
To assemble, place your Trackimo in the cradle with the power and USB on the same side as the cutouts. Place the strap over the underside of the case with the risers "up". Thread the M4 bolts through the case ears and the strap and into the nut traps. Tighten until there is about 2mm of space left between the nut trap and the strap.
Orient the the nut trap so that the "narrow" side slides into the landing strut. You will see a cavity that the nut trap will fit into (see photos). Be sure to turn the nut trap so that the longer end goes into the strut first.
Once both landing struts are in place, insert the unit into your drone until the struts click into place. Then tighten the M4 bolts until they just start to grip the struts and that the case doesn't wobble. You're done!
See note about battery access and camera cover below.