Thingiverse
Tracing pad OpenBeam mount for 3d Printer Lighting by dave312
by Thingiverse
Last crawled date: 3 years, 1 month ago
I just picked up one of these tracing pads for a project and I was impressed by the light quality. Since I was only using it for one specific project I thought it would be nice to use it for something else. I also had some OpenBeam/MakerBeam XL parts left over from another project, so I came up with some 3d bits to make a nice illumination rig.
This project consists of a pad clamp with a threaded bolt to hold the pad in place, plus a baseplate foot I designed a while ago for OpenBeam stuff. CAUTION: The pad clamp is NOT designed to have the pad hang vertically! The threads are loose so it'll print easily, which means it's just "snug" not "tight".
This project makes NO SENSE if you don't happen to have these parts spare because a tracing tablet costs $20 and the OpenBeam parts cost $10. There are far easier ways to light a 3d printer for less than $30. But if you happen to be in the same situation I was in this might be useful.
This project consists of a pad clamp with a threaded bolt to hold the pad in place, plus a baseplate foot I designed a while ago for OpenBeam stuff. CAUTION: The pad clamp is NOT designed to have the pad hang vertically! The threads are loose so it'll print easily, which means it's just "snug" not "tight".
This project makes NO SENSE if you don't happen to have these parts spare because a tracing tablet costs $20 and the OpenBeam parts cost $10. There are far easier ways to light a 3d printer for less than $30. But if you happen to be in the same situation I was in this might be useful.
Similar models
thingiverse
free
Y-Axis bed Stabilizer for p802ma
...der parts,but if you don't have that use narrow one. use also 5
"of threaded rod1/4
"'x 20un and nut to tide-up
grabcad
free
3D delta printer upgrades
...delta printer upgrades grabcad i have a 3d printer similar to a mini kossel, and with time i build...
thingiverse
free
Harbor Freight Clamp Holder by Fillitup309
...he top holder piece into two part if you don't want to use support material)
mount with screws (and some washers if you want)
thingiverse
free
Tyco Trucking US-1 Windshield And Lights by RockChalk846
...le cheaper to manufacture a pair of them that are connected (as a single part) than to have them manufacture two separate pieces.
thingiverse
free
light globe by Chazrocker
...r lightbulb problems today.
"nice light fixtures. congratulations! you get the promotion." that's more like it.
thingiverse
free
Cobblebot Little Monster Spool Holder by Phelps3D
... part with the washer and then nut. you can adjust it to the tension you desire so the spool will easily turn on the clamp parts.
thingiverse
free
Bowden Filament Guide WITH!!! Cable holder for Ender 3 and CR's 3d printer by kelokera
...m... so you can print it too...
this one have a zip tie hole to grab your cables even better...
so... enjoy and happy printing!!!
thingiverse
free
Filament sample spool
...a bit of grease on the threads, or by scaling one of the parts up or down just a bit.
please share your make, always nice to see.
grabcad
free
Angular wedge / welding clamp
...ut i'm sure that in folder it is. so download it and write coments. and also i'm sorry but i used just a cosmetic thread.
thingiverse
free
Lamborghini Aventador by MajorOCD
...ask.
i even made a "putty tool" for filling the cracks if you don't have the right tool for the job (i didn't).
Dave312
thingiverse
free
Groovy Pencil Holder by dave312
...0mm pencil holder with some groovy cutouts that make it look cool both inside and out!https://www.youtube.com/watch?v=sj_qlavuvks
thingiverse
free
Simple Wavy Soap Dish by dave312
... soap dish by dave312
thingiverse
simple, easy to print soap dish. has a bit of an angle to drain, so primarily for shower use.
thingiverse
free
Parts tray with octagonal divots by dave312
...iverse
a stylized version of the ubiquitous bench parts tray. octagonal cut-outs and an octagonal shape....doubles as a coaster!
thingiverse
free
M5StickC Clip by dave312
...block piece you can use to create your own mounts. throw it in tinkercad and glue other stuff to it and you are off to the races!
thingiverse
free
Surgical Mask Strap Remix - Smaller by dave312
...- smaller by dave312
thingiverse
shorter version of the popular nih surgical strap. fits on smaller printers like the lulz mini.
thingiverse
free
Faceted Spiral Vase by dave312
...ooks really stunning in black, very pretty in other colors. easy print, no supports, no rafts, etc. my samples are all cheap pla.
thingiverse
free
Surgical Mask Strap STAND by dave312
...sk straps. print with anything, no supports, 20% fill ought to do it. need a prusa or a fairly decent sized printer due to width.
thingiverse
free
OpenBeam / MakerBeamXL Wide Round Foot by dave312
... foot for openbeam/makerbeam xl 15x15mm beam kits. press-fit and fairly tight tolerances so tweak your printer setup accordingly.
thingiverse
free
HackRF Desk Stand by dave312
...ign...print two copies of the feet, one copy of the box, there are pins that fit into the box. a dab of superglue seals the deal.
thingiverse
free
Prusa filament clip by dave312
... so the part doesn't cool. this clip attaches to the frame and lets you quickly secure your filament while you load another.
Openbeam
thingiverse
free
OpenBeam Extender by akruger
..., or be glued together.
the openbeam was created using the openbeam 1515 extrusion, v2: http://www.thingiverse.com/thing:100960
thingiverse
free
Printable Openbeam by plastic
...printable openbeam by plastic
thingiverse
print openbeam compatible extrusions. 15mmx15mm extrusion with slot for 3mm nut.
thingiverse
free
Openbeam construction clips by Mister_sovereign
...openbeam construction clips by mister_sovereign
thingiverse
openbeam construction clips
thingiverse
free
Right angle for Openbeams by yannrs
...right angle for openbeams by yannrs
thingiverse
a right angle for openbeams.
thingiverse
free
OpenBeam parts in Sketchup by unrepentantgeek
...openbeam parts in sketchup by unrepentantgeek
thingiverse
openbeam parts for sketchup.
thingiverse
free
Openbeam Clip by didierh
...openbeam clip by didierh
thingiverse
small clip to contain cables into the groove.
use on openbeam profile - 15mm wide only.
thingiverse
free
Holder base for OpenBeam by NeFa
...holder base for openbeam by nefa
thingiverse
simple angled arm for use with openbeam.
thingiverse
free
NEMA17 support for openbeam by Fey
...nema17 support for openbeam by fey
thingiverse
support for nema 17 motor openbeam 15x15mm bars
thingiverse
free
Openbeam Breadboard Case by schmiddim
...openbeam breadboard case by schmiddim
thingiverse
attach some wirings on your openbeam constructions with this case.
thingiverse
free
OpenBeam Feet by OpenBeamUSA
...g indentation is also sized correct for a 3m bumpon adhesive feet.
http://blog.openbeamusa.com/2012/05/29/in-depth-openbeam-feet/
Tracing
3ddd
$1
TRACE
...trace
3ddd
itre , trace
design - andrea garuti. 2009 itre
design_connected
$16
Trace 1
...trace 1
designconnected
blu dot trace 1 computer generated 3d model.
3ddd
$1
Chair Desalto Trace
...chair desalto trace
3ddd
desalto , trace
chair desalto trace
design_connected
$16
Trace Carpet
...trace carpet
designconnected
ligne roset trace carpet computer generated 3d model. designed by azambourg , françois.
design_connected
$16
Traced Rug
...traced rug
designconnected
nani marquina traced rug computer generated 3d model. designed by guixé, marti.
design_connected
$16
Trace Chair
...trace chair
designconnected
desalto trace chair armchairs computer generated 3d model. designed by shin azumi.
3ddd
free
Itre / Trace
...itre / trace
3ddd
itre
itre trace pendant lamp and wall lamp. max 2011 x64 and fbx formats included.
turbosquid
$28
TRACE LEATHER CHAIR
...royalty free 3d model trace leather chair for download as max on turbosquid: 3d models for games, architecture, videos. (1522589)
turbosquid
$31
Ring Trace print model
...trace print model for download as max, 3ds, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1576849)
turbosquid
$3
NaughtOne Trace Table Collection
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Pad
turbosquid
$15
Note Pad Writing Pad
...oyalty free 3d model note pad writing pad for download as max on turbosquid: 3d models for games, architecture, videos. (1309269)
3ddd
$1
Bed Padded
...bed padded
3ddd
padded bed , pixellin
padded bed , pixellin , bed 3d model
3d_export
$5
Padded stool
...padded stool
3dexport
padded stool
3d_export
free
Padded stool
...padded stool
3dexport
padded stool
3d_export
$5
pads
...pads
3dexport
3d_ocean
$2
mouse pad
...mouse pad
3docean
3d models computer electronics mouse
mouse pad 3d models. it’s mouse pad.
3d_export
$5
Padded stool
...padded stool
3dexport
leather padded stool on a metal base
3d_export
$5
Padded stool
...padded stool
3dexport
leather padded stool on a metal base.
3d_export
$8
Padded chair
...padded chair
3dexport
padded chair, black spout and light blue leatherette.
3d_export
$7
Padded Stool
...padded stool
3dexport
padded stool, black spout and light blue leatherette.
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
Lighting
archibase_planet
free
Light
...light archibase planet lamp lighting light light - s2 - 3d model for interior...
archibase_planet
free
Light
...light archibase planet light luminaire lighting light l0465 - 3d model (*.gsm+*.3ds) for interior 3d...
3d_export
$5
lighting
...lighting
3dexport
lighting
3d_export
$5
lighting
...lighting
3dexport
lighting in livingroom
turbosquid
$3
Lighting Tree with Lights
...d model lighting tree with lights for download as max and 3ds on turbosquid: 3d models for games, architecture, videos. (1585507)
archibase_planet
free
Light
...light archibase planet luster lighting solution light - s - 3d model for interior...
archibase_planet
free
Light
...light archibase planet luster lamp lighting light 1 - 3d model for interior 3d...
archibase_planet
free
Lights
...lights
archibase planet
surgical lights surgical lamp
surgical lights (floor) - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light archibase planet lighting luminaire candlelight light l0463 - 3d model (*.gsm+*.3ds) for...
3d_export
$18
street light-lighting-light-xia bing
...
3dexport
street light-lighting-light-xia bing<br>max 2015 v-ray 3 max 2015<br>textures<br>all files in zip...