TR16340 Adapter by grafis

...ount. i redesign it for my limit switch. mount require: 2xm2 nuts (flat) 2xm2 screw din 912 1xm3 iso 7380 1xm3 hammer t-slot nut

...0 it works forhttp://www.thingiverse.com/thing:18379 and other. feel free to customize the adapter plate. bom 1xm3 nut 1xm3 screw

...erse pulley system. designed for up to 8 mm rope. print : 1x main block 2x weel hardware: 1x m3x35mm screw 1xm3 self locking nut

...lan thingiverse mk8 extruder mount+bedlevel+fan 1xm3 15mm bolts&nuts 6xm3 25-30mm bolts&nuts 4xm4 25-30mm bolts&nuts

...ousing consists of three parts: box top cover switch button to assembly you will need: 4xm2 screw din 912 4xm3 nuts 1xm3 iso 7380

...orstner drill, alternatively you can melt a 20mm hole into the box bowden tube 4mm 1xm3 worm screw per outlet silicon gasket glue

...m screw m3 locknut 2xm3 nut 3x m3 washer 2x 623 bearings 2x 8mmx2.75mm magnet 3.5mm panel mount jack 1xm3 brass knurl hookup wire

...let it fall off the bed and then jog to the destruction, let's have our naive expectations of straightness peacefully ruined!

...designed to hold 2x 40g (1.41 oz) elmer's-brand gluesticks, but should work with any gluestick with a diameter of about 30mm.

... 1xm3x30 bolt and 1xm3 nut for the belt tension bracket. for the bearing the same m3 bolt from original idler should work fine.

...spacer by grafis thingiverse spacer

...mount by grafis thingiverse mount (parametric)

...mount by grafis thingiverse simple mount

...mount by grafis thingiverse quanum fpv googles v1 strap mount

...antenna mounts by grafis thingiverse antenna mount

...gps mount by grafis thingiverse gps mount top

...power supply cover by grafis thingiverse pla infill 100%

...application box stand by grafis thingiverse stand for parametric application box. fix parameters.

...m5stack atom pcb mount by grafis thingiverse m5stack atom pcb place

...adapter thingiverse adapter to use filament rolls with 72mm inside diameter

...adapter by ladehoff thingiverse adapter

...adapter by eslyuta thingiverse adapter

...clean 45rpm adapter, single adapter thingiverse clean, basic 45rpm adapter. fits most turntables.

...fan adapter thingiverse fan adapter

...lens adapter thingiverse lens adapter

...fahrradventiel adapter thingiverse fahrradventiel adapter

...adapter with by dougthegr8 thingiverse adapter holder

...gopro adapter thingiverse angal adapter for gopro

...socket adapter thingiverse hand twist socket adapter