Thingiverse
ToyREP Stepper Motor Cooling by thorgal
by Thingiverse
Last crawled date: 3 years ago
This upgrade of ToyREP will allow you to attach 40x40x10mm fans close to X, Y and E motor for better cooling and reliability. Fans may even let you use a bit higher print speeds. These models are prepared for 28BYJ-48 with four mounting holes but are also backward compatible with more common motors with two holes only.
Models should work, although I did not print them my self yet. My fans are already glued to similar positions, so I don't need this upgrade :D. And I don't have motors with four mounting holes at home either. They are marked as work-in-progress unless somebody will prove them working.
Change log
2015-09-02
Reuploaded X2_Rev2, as the original had some small issue in hole for M5 nut.
Prepared X1_M8 and X2_M8. These can use quicker M8 threaded rods for Z axis movement instead of slow M5.
2015-08-29
Uploaded revision for motors with four mounting holes.
2015-08-24
Reuploaded X1_Rev1, as the previous one had some issues.
Models should work, although I did not print them my self yet. My fans are already glued to similar positions, so I don't need this upgrade :D. And I don't have motors with four mounting holes at home either. They are marked as work-in-progress unless somebody will prove them working.
Change log
2015-09-02
Reuploaded X2_Rev2, as the original had some small issue in hole for M5 nut.
Prepared X1_M8 and X2_M8. These can use quicker M8 threaded rods for Z axis movement instead of slow M5.
2015-08-29
Uploaded revision for motors with four mounting holes.
2015-08-24
Reuploaded X1_Rev1, as the previous one had some issues.
Similar models
thingiverse
free
ToyRep Nema 17 Upgrades by zipeartnes
...unt is hard to print. you will need to experiment with ways to print it with supports.
have fun and feel free to leave comments.
thingiverse
free
Fabrikator Mini extruder cooling fan by Nicoli0012
...der and 2 m3x20 nuts and bolts to mount the fan to the bracket.
i wired it in parallel to the fan built in to cool the extruder.
thingiverse
free
TAZ 4 Cooling Duct by evolv3d
... for interference, i used a drill to give them a start then use the screws to create threads. hope you enjoy. works great for me.
thingiverse
free
FT-5 Y Carriage Side Mounts by IOIIOOO
...k better for the m5 and m3 screws, and each now has a flush side so you can print with less support. i also added an idler mount.
thingiverse
free
540 Motor Fan mount 40mm
...yet, but i let you know whe i finally got it and if it works.
use a screw tap for the fan holes or just screw them in with force.
thingiverse
free
Hotend Fan Laser Mount by Socrates214
... didn't have the metal cover for my hotend i could not use the magnets that came with the laser, not that i would trust them.
thingiverse
free
ToyREP Hotend Cooler by thorgal
...ermanently turned on will locally cool the print surface (that may cause warping) and prolong heating of heatbed and/or extruder.
thingiverse
free
OB1.4 Y-motor fan upgrade by Wired1
...rt works with both the ob1 and ob1.4 printers.
this example was printed with a broken y-motor mount hence the poor print quality.
thingiverse
free
CR10 Titan Aero , EzABL and Part Cooling fan by KRushin
... tolerances. this was originally remixed from mount that evil_k made ( https://www.thingiverse.com/thing:2460377 ) .
this is vers
thingiverse
free
Re-Upload: Japica Printrbot Base by Datenkrieger
...useful if you don't mount the y-motor to the base (i use the alternative y-motor mount in the center between the base parts).
Thorgal
thingiverse
free
Hotend Cooler by thorgal
... with additional holes that allow installation on 30mm fans as on e3d v6 hotend. rest is the same as for the toyrep hotend cooler
thingiverse
free
LED light torch by thorgal
...battery - no soldering required.
you can use it as it is in small lantern or intergrate the battery holder into your own design.
thingiverse
free
Filament bobbin holder by thorgal
...obbins with 30-31mm center openings diameter. bobbin of overall size 132mm wide up to diameter 230mm can be fitted in the holder.
thingiverse
free
Coffee Measuring Spoon 7g by thorgal
...nt to grind one dose at a time. the amount may vary depending on bean size and shape, so you will have to experiment a bit.
enjoy
thingiverse
free
Hookah diffuser by thorgal
...er 11-12mm. inside the flange is also a groove for o-ring, but in my case (11.5mm) the aerator stays on the pipe even without it.
thingiverse
free
ToyREP Heatbed by thorgal
...temperature 116°c (at room temperature 24.5°c) in 15-20 minutes
for heatbed in operation see video https://youtu.be/2mr6av5bdxu
thingiverse
free
28BYJ-48 Plastic Cap by thorgal
...teeth on output shaft.
(32x22x27x24)/(9x11x9x8)=64
the other motor i got previously had:
(32x22x26x31)/(9x11x9x10)=63.68395
thingiverse
free
Mata Leon Amboss 8ball Hookah Diffuser by thorgal
... bit quieter. but both will splash the water in the jar and that is quite audiable. still way different from the stem without it.
thingiverse
free
ToyREP Power Supply Cover by thorgal
... be installed at the very beginning of toyrep assembly. for latter upgrade you will have to disassemble almost the whole printer.
thingiverse
free
ToyREP Hotend Cooler by thorgal
...ermanently turned on will locally cool the print surface (that may cause warping) and prolong heating of heatbed and/or extruder.
Toyrep
thingiverse
free
ToyREP 3mm Fillament Extruder by TouchWARE
...llament. this is the only part that has to be printed to upgrade it.
we use this extruder on our toyrep printer with lcd display.
thingiverse
free
ToyREP leg 50mm by sobo84
...toyrep leg 50mm by sobo84
thingiverse
xyz
thingiverse
free
ToyREP Legs for LCD Display upgrade by TouchWARE
...ing toyrep to lcd 128x64 display (full graphic smart controller 12864).
we use these legs on our toyrep printer with lcd display.
thingiverse
free
ToyREP Z-probe by mwelchuk
...rews in the upper two mount points, but required longer ones for the lower two as i also have the toyrep hotend cooler installed.
thingiverse
free
ToyREP Power Supply Cover by thorgal
... be installed at the very beginning of toyrep assembly. for latter upgrade you will have to disassemble almost the whole printer.
thingiverse
free
ToyRep Nema 17 Upgrades by zipeartnes
...unt is hard to print. you will need to experiment with ways to print it with supports.
have fun and feel free to leave comments.
thingiverse
free
toyRep nema 17 adapters for X and Y axis by marcomx
...ed parts for toyrep for the x and y axis, the z axis still use the 28byj-48
any tips will be much appreciated, but not necesary,
thingiverse
free
ToyRep LCD2004 Mount by qupen
...i to send the rest of my parts so i can test it out fully. but i think it can work.
update 18/07/2017
some edits to the right arm
thingiverse
free
ToyRep remake by Branez
...watch?v=rsjp6iy3twu
i added a bigger stepper motors for x and y axis and branyaq extruder
http://www.thingiverse.com/thing:881394
thingiverse
free
2.5 ToyRep pulley for Y axis by sobo84
...2.5 toyrep pulley for y axis by sobo84
thingiverse
just a remix to hold down belt on my y axis.
Stepper
turbosquid
$85
Stepper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$22
Mini Stepper
...gymnastic indoor legs machine mini silver sport stepper trainer workout
3d model of silver and black mini stepper with a counter.
turbosquid
$3
stepper deluxe
...osquid
royalty free 3d model stepper deluxe for download as on turbosquid: 3d models for games, architecture, videos. (1284335)
turbosquid
$49
Stepper Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Fitness Stepper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
stepper motor driver
...stepper motor driver for download as , fbx, dae, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1688860)
turbosquid
$1
Stepper motor driver
... model stepper motor driver for download as obj, stl, and ige on turbosquid: 3d models for games, architecture, videos. (1577811)
3d_export
$5
Stepper motor Nema17 17HS4401
...stepper motor nema17 17hs4401
3dexport
turbosquid
$1
Nema 17 Stepper motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Nema 17 Stepper Motor 59Nm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Cooling
turbosquid
free
Cool Inc. Cool Box
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
cool penguin
...cool penguin
3dexport
cool penguin
turbosquid
$1
cooling
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$26
cooling tower
...ers.<br>model with full detail in real size. all nodes and bolted connections are built. it was designed for nuclear power.
3ddd
$1
Mantra Cool
...14 версиях и obj-файл, а также материал для включенного и для выключенного светильника. turbosmooth/meshsmooth при необходимости.
3d_export
$5
cool electric guitar
...cool electric guitar
3dexport
cool electric guitar
turbosquid
$5
Cooling glass
...quid
royalty free 3d model cooling glass for download as obj on turbosquid: 3d models for games, architecture, videos. (1193829)
turbosquid
$30
CPU Cooling
...royalty free 3d model cpu cooling for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1386263)
turbosquid
$5
Cool CLoud
...
royalty free 3d model cool cloud for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1572300)
3d_export
$5
table cooling fan
...table cooling fan
3dexport
table cooling fan made of black plastic. individual small size cooling fan for office desk.
Motor
archibase_planet
free
Motor
...base planet
motor motor engine engine electric motor
motor wagner n250213 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n151112 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Motor
...motor
archibase planet
motor motor engine engine
motor n150615 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
turbosquid
$15
Motor
...otor
turbosquid
royalty free 3d model motor for download as on turbosquid: 3d models for games, architecture, videos. (1639404)
3d_ocean
$5
Electric motor
...electric motor
3docean
car electric engine industry motor phase train vehicle
an electric motor enjoy!
3d_ocean
$18
Electric Motor
...electric motor
3docean
electric motor engine machine mover parts
3d model electric motor for hoist crane
turbosquid
$29
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
electric motor
...electric motor
3dexport
electric motor use for industrial purposes
3d_export
$5
servo motor
...tor
3dexport
it's a simple part of servo motor 0.75kw for used in machines assembly to show specified motor in own project.