Thingiverse
Torque measuring lever with bearing pivot
by Thingiverse
Last crawled date: 4 years, 3 months ago
Remix of [A_R_B's]{https://www.thingiverse.com/A_R_B} torque measuring arm which has a pivot which can be attached to a board. Uses a 6903 30x17x7 cartridge bearing for the pivot. Sized to work with a Park Tools [DS-2]{https://www.parktool.com/product/tabletop-digital-scale-ds-2} digital scale which is 26mm high.
The plan is to mount the pivot to a board and have the scale to the right with the pointer in the center of the tray. Then a 13mm socket on the hex can be turned to read the breakaway force.
Also adjusted the length of the arm slightly - A_R_B's version is 200mm which is based on the conversion 1kgf = 10N. While that's close and more than close enough for the accuracy of this setup, mine is sized to 204.1mm based on 1kgf = 9.8 N. In practice you'll never really see that level of accuracy but I figured since I could, I'd do it anyway.
Sized to the 6903 bearing as that's what I had on hand that would clear the 13mm hex. Fusion 360 files included if you've got a different bearing on hand.
The plan is to mount the pivot to a board and have the scale to the right with the pointer in the center of the tray. Then a 13mm socket on the hex can be turned to read the breakaway force.
Also adjusted the length of the arm slightly - A_R_B's version is 200mm which is based on the conversion 1kgf = 10N. While that's close and more than close enough for the accuracy of this setup, mine is sized to 204.1mm based on 1kgf = 9.8 N. In practice you'll never really see that level of accuracy but I figured since I could, I'd do it anyway.
Sized to the 6903 bearing as that's what I had on hand that would clear the 13mm hex. Fusion 360 files included if you've got a different bearing on hand.
Similar models
thingiverse
free
Torque Measuring Lever (NewtonMeter Tester) by A_R_B
...rse.com/thing:2613057).
13mm (½") as i tested the torque rotors with an m8 screw (with the 'reduction' part).
enjoy!
thingiverse
free
Third Hand - Helping Hand - Solder Assistant by loosestkid_FPV
...8.html?rmmds=search )
arm only ( http://www.banggood.com/realacc-strange-third-hand-spare-part-hand-p-1097222.html?rmmds=search )
thingiverse
free
Ursa Bear Corona DS-843MG Digital High Torque Micro Servo base by Superclodbuster
...e edge and a center 3mmx8mm cap screw to hold the plates together. all the original stls parts of the servo saver are direct fit.
thingiverse
free
Spring-loaded Replicator 2 Drive Arm for a 3mm bearing by Pomeroyb
...ng down the bearing post to around 2.9 mm. it's still a little tight, but the bearing is pressed in easily with a 1 ton pres.
thingiverse
free
Ultimaker 2 filament guide (625 bearing version) by juancgarcia
...hingiverse
remix of vapor83's ultimaker 2 filament guide but for 625 size bearings, 'cause that's what i had on hand
thingiverse
free
Hexagonal Bases with Magnet Sinks, Single and Multi-Hex - 30mm scale for Lancer, Battletech, etc. by thathobo
...le, the size 2 and 3 simply have 2mm deep holes, the idea being to seat the magnet so it's flush with the bottom of the base.
thingiverse
free
Just another torque measurement tool by kiziuk
...t tool to be used with kitchen scale.
arm length is 20 cm, so each 1 nm of torque is equivalent to 0.5 kg of weight on the scale.
thingiverse
free
Simple 19mm wrench for A_R_B fixed torque wrench handles
...od job on the cap and the case.
fusion 360 original file included if you want to change anything. if you do, please post a remix!
thingiverse
free
Warhammer Underworlds Shadespire boards by Kanashisaru
...r scenery is available on thingiverse or retailers).
note : each board is split in 2 parts (a and b) to fit a printer's size.
thingiverse
free
Base Hexes for Gloomhaven by Robagon
...hexes for use with board game gloomhaven or a similar hex based game. the hexes measure 1.5 inches from...
Torque
thingiverse
free
Torque meter by Mike_Picerno
...the arm in order to equilibrate the torque of the motor. the measure of the arm in [mm] can be read directly on the torque meter.
thingiverse
free
Torque Star Wheel
...torque star wheel
thingiverse
torque star wheel made in blender
instagram obscurus geek
thingiverse
free
Torqued Round Vase by egon
...qued round vase by egon
thingiverse
another vase, this time a more round, there is a torqued and non-torqued version available.
thingiverse
free
IoT torque measurement by JFM836
...iot torque measurement by jfm836
thingiverse
4th year group project - torque
thingiverse
free
Torque screw driver by Vorobej72
... by vorobej72
thingiverse
torque screw driver adjustable. torque value from 0 nm to approx. 3 nm.
it's depended from spring.
thingiverse
free
Torqued Keychain by Caligator
...ngiverse
torqued keychain that i designed.
i also added the sldprt in case any solidworks users want to make their own additions
thingiverse
free
Simple Torque Tester by maximscy
...simple torque tester by maximscy
thingiverse
design with freecad
torque tester many things
0~6kgfcm
thingiverse
free
Torque Bolts by Iusetobeaposter
...torque bolts by iusetobeaposter
thingiverse
a selection of bolts that use a 12 point driver
thingiverse
free
Ibanez Edge Torque Bush by funkshin
...nez edge torque bush by funkshin
thingiverse
this is a replacement torque bushing for the ibanez edge series pop-in tremolo bar.
thingiverse
free
Torqued Vases by egon
...torqued vases by egon
thingiverse
thought i give the vases design a try, this is the first result.
Pivot
thingiverse
free
Pivot by sivam
...ler. it an be used as a pivot for the pendulum experiment or for the circular motion experiment. this is part of the starter kit.
thingiverse
free
Pivot Template
...pivot template
thingiverse
pivot template for the tabletop game pacific rim extinction by river horse.
thingiverse
free
Pivot Joint by WayneLondon
...pivot joint by waynelondon
thingiverse
this is a pivot joint!
thingiverse
free
Pivot Bicycle Logo
...pivot bicycle logo
thingiverse
logo for pivot bicycles
thingiverse
free
pivot by mercyshotz
...pivot by mercyshotz
thingiverse
asdf
thingiverse
free
pivot hinge by malsais
...pivot hinge by malsais
thingiverse
multi purpose pivot hinge
thingiverse
free
Shower Door Pivot
...shower door pivot
thingiverse
this is a replacement pivot for a shower door.
thingiverse
free
Arm Pivot by michaelodonnell500
...arm pivot by michaelodonnell500
thingiverse
pivot for the arm 2 needed per robot
thingiverse
free
Pivot Mount
...pivot mount
thingiverse
use this to mount things on.... ;-)
thingiverse
free
Double Pivot by fpvpassion
...double pivot by fpvpassion
thingiverse
double pivot pour transformer la zigogne en octocopter.
Lever
thingiverse
free
Lever by samk
...lever by samk
thingiverse
human lever
thingiverse
free
lever by _Seb
...lever by _seb
thingiverse
just a simple design for a broken lever, nice training project for fusion 360
thingiverse
free
Tripod Lever by amasraff
...tripod lever by amasraff
thingiverse
tripod lever
thingiverse
free
Lever for sofa by Etxaniz
...lever for sofa by etxaniz
thingiverse
a lever for sofa.
thingiverse
free
Toggle Lever by Simonsho
...toggle lever by simonsho
thingiverse
this is a toggle lever
thingiverse
free
Window lever by fabien
...window lever by fabien
thingiverse
window lever 737
thingiverse
free
cistern lever by sloggs156
...cistern lever by sloggs156
thingiverse
replacement lever for uk cistern.
thingiverse
free
Lever valve
...lever valve
thingiverse
for modeling
thingiverse
free
Metal Levers by Eternel06
...metal levers by eternel06
thingiverse
nice metal lever designed for decoration
thingiverse
free
Door lever by judetomate
...door lever by judetomate
thingiverse
i made this door lever for a friend.
Measuring
thingiverse
free
Pasta Measurer
...pasta measurer
thingiverse
this is a measurer for pasta
thingiverse
free
Diameter measurement
...diameter measurement
thingiverse
measure holes for cutouts
thingiverse
free
Spaghetti Measurer
...spaghetti measurer
thingiverse
simple spaghetti measurer for one to four servings
thingiverse
free
Measurment Pentagon
...ingiverse
measurment pentagon
now you will be safe
and you can measure somethink.
1 segment = 30 ml
center = 60 ml
full = 160 ml
thingiverse
free
Spaghetti measure
...spaghetti measure
thingiverse
a tool to help measure spaghetti.
it has holes for 1 serve, 2 serves or 4 serves
thingiverse
free
smart measurer
...smart measurer
thingiverse
atr
thingiverse
free
Square measuring tool for tape measure by Jmulalley
...easure in place with less tension required.
update
two object where off platform by 1mm. corrected and uploaded level version.
thingiverse
free
Measuring spoons by joisg
...measuring spoons by joisg
thingiverse
measuring spoons
thingiverse
free
Spaghetti Measure by print3design
...spaghetti measure by print3design
thingiverse
spaghetti measure
thingiverse
free
Tape Measure Holder
...tape measure holder
thingiverse
holder tape measure in place against wall to measure child's height.
Bearing
thingiverse
free
bearing
...bearing
thingiverse
just a bearing i made for fun
thingiverse
free
Bear
...bear
thingiverse
bear i made in tinkercad to see if i could
thingiverse
free
Brown Bear, Brown Bear by morganglass
...brown bear, brown bear by morganglass
thingiverse
brown bear, brown bear
thingiverse
free
care bears sunshine bear by johnboyjr
...care bears sunshine bear by johnboyjr
thingiverse
care bear sunshine bear
thingiverse
free
Bearing by mskokondo
...bearing by mskokondo
thingiverse
working bearing with bearing balls.
thingiverse
free
Bear mom and bear babyV2 by AlexStormND
...com/en/3d-model/art/bear-mom-and-bear-babyv3
bear mom and bear babyv4https://cults3d.com/en/3d-model/art/bear-mom-and-bear-babyv4
thingiverse
free
Bear mom and bear baby by AlexStormND
...om and bear baby by alexstormnd
thingiverse
bear mom and bear baby, you can see my other sculptures at https://t.me/alexstormnd
thingiverse
free
bearing by isaacdrais
...bearing by isaacdrais
thingiverse
bearing
thingiverse
free
Bearings by The_LAB
...bearings by the_lab
thingiverse
bearings
thingiverse
free
Bearing by milad64
...bearing by milad64
thingiverse
bearing