Thingiverse
Top Enclosure by irishbeard
by Thingiverse
Last crawled date: 3 years ago
Top enclosure made specifically for the Ultimaker 2 aluminum extrusion printer.
The design has tabs at the bottom which fit securely into the 2020 aluminum extrusion rail. It can be easily taken off to print PLA or put back on to reduce warping with ABS or other filaments. For the 2020 rails I used 4mm clear acrylic.
There is a small notch taken out in the back right to allow the PTFE tubing to enter from the back. I feed the hotend wires through the inside of the printer (see photos) to minimize the hole size and heat loss. The design can be flipped depending on which side your extruder is on.
The acrylic was bonded using Weld-On 4 which gives it a nice clean look but could also easily put in screw holes for corner mounts. The lasercut edges were a bit rough so I sanded them to increase surface contact / bond strength.
Many thanks to jasonatepaint (designed printer) and lions3 (acrylic side and front panels). I'm really enjoying this printer!
The design has tabs at the bottom which fit securely into the 2020 aluminum extrusion rail. It can be easily taken off to print PLA or put back on to reduce warping with ABS or other filaments. For the 2020 rails I used 4mm clear acrylic.
There is a small notch taken out in the back right to allow the PTFE tubing to enter from the back. I feed the hotend wires through the inside of the printer (see photos) to minimize the hole size and heat loss. The design can be flipped depending on which side your extruder is on.
The acrylic was bonded using Weld-On 4 which gives it a nice clean look but could also easily put in screw holes for corner mounts. The lasercut edges were a bit rough so I sanded them to increase surface contact / bond strength.
Many thanks to jasonatepaint (designed printer) and lions3 (acrylic side and front panels). I'm really enjoying this printer!
Similar models
thingiverse
free
10 Series Extrusion Brace by BDP1988
...xtrusion, but i ended up scoring enough extrusion to build a printer out of a scrap pile, and decided that i would put it to use.
thingiverse
free
90-Degree Strip Rail by Mike_381
...u print in a solid or heavy infill, you will need to take apart your extrusion corner to get the keepers into the 2020 extrusion.
thingiverse
free
Vertex k8400 Hood enclosure (Remix) by Cinya
...top is 38cm and bottom 37,7cm the lid is 36,5x36,5cm.
the back acrylic have a 12mm cutout at the bottom 9,7cm in from both sides.
grabcad
free
2020 Aluminum Extrusion Flat Corner
...0 aluminum extrusion flat corner
grabcad
this is a model of a 5 hole aluminum extrusion corner plate for 2020 t and v slot rail.
thingiverse
free
kossel printer ac-inlet box For 2020 Aluminum Extrusion Frame by TK_DESIGN
...m extrusion frame by tk_design
thingiverse
mounting hole size m4 screw.
back side panel mount hole 2.5mm -> 3mm tapping task.
thingiverse
free
Corner Brackets for 2020 Aluminum Extrusion Brace by lembasbrot
... that case you might want to use this design, of which i basically based my version on: https://www.thingiverse.com/thing:2410086
thingiverse
free
2020 Poor man's enclosure mount by SOLESHOE
... is not an obligation as the mount just clips itself on the extrusion.
i printed mine using 0.5 nozzle and mosquito magnum clone.
thingiverse
free
Creality Ender-5 Plus 2020 extrusion 100mm riser foot for each corner by Tranquillity_Prototypes
...sibly i could fit the stock silicon feet to these.
the idea being that this screws to the 2020 extrusion using m3 t-nuts i think.
thingiverse
free
Arduino Box (parametric) by crox
...here are also two holes in the top part that i used for a led and a push-button. those can be easily commented out if not needed.
thingiverse
free
2020 mount to MGN12 Carriage
... print with supports, this gives a cleaner looking in my opinion because some printers struggle to make good quality small holes.
Irishbeard
thingiverse
free
Prusa i3 MK2 filament guide by irishbeard
... hole (must unload before adding it to the guide)
*if printing the open version, orientate the open side so that it faces the bed
thingiverse
free
UM2 Front door hinge and locking knob by irishbeard
...
m3 nut (5x)
2020 t-nuts (4x)
filament for pins
printed in abs with 0.2mm layer height and 20% infill (no raft or support needed)
thingiverse
free
UM2 Aluminum Extrusion - Enclosure by lions3
...need a knob and hinge for the front panel? irishbeard did an amazing job. his design is now on...
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Top
archibase_planet
free
Top
...top
archibase planet
top
top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
free
Range Top V36C top
...range top v36c top
3ddd
гриль
проф. гриль range top v36c top
archibase_planet
free
Top
...top
archibase planet
dresser kitchen furniture
top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Top
...top
archibase planet
bracket bar furniture
bar top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
Top
...lty free 3d model top for download as ma, max, blend, and obj on turbosquid: 3d models for games, architecture, videos. (1579951)
turbosquid
$39
Top
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Top
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
top knifle
...top knifle
3dexport
top knifle
design_connected
$11
Drop Top
...drop top
designconnected
plumen drop top computer generated 3d model.
3d_export
$245
top of the material
...top of the material
3dexport
top of the material,commercial ceiling ceiling material, metal material