Tool holder for Geeetech Prusa I3 Pro B by Anehall

Last crawled date: 3 years, 1 month ago

Hi!
I´ve had my eye out for a good tool holder to my 3D printer... Couldn´t find one so I dicided to make my own...
This tool holder is made to hold the tools you get with your printer when you buy it from Geeetech (You get a screwdriver set, some files and with some other bits and pieces).
Also wanted it to hold some SD cards and USB devices and OFC my trusty digital calipers (will hold most calipers out there though :D).
All you need is four pieces of M3 nuts with M3 x 12mm screws (Probably have spares from when you bought your printer). And to change the screw that holds the bracket for the threaded- and guiding- rods to a M3 x 20mm instead of the original M3 x 14mm.
Had it mounted for some days now and are VERY pleased... Wobbles with the printer a bit but everything stays put in their holes etc.
NEWS 2016-08-18
Print with higher infill for stronger build... 30% will flex a bit if you fill the toolholder (dont seem to break or anything, just a simple tip). Mine is filled with tools and there weight is over 1000grams!