Thingiverse
![Tinypusher Protective Bottom Plate by stylesuxx](/previews/8113676.jpg)
Tinypusher Protective Bottom Plate by stylesuxx
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is a protective bottom plate for the FullspeedRC Tinypusher. I was a bit hesitant since the model comes with absolutely no protection on the bottom and I was afraid to break the ESC in case of landing on gravel or similar. That's why I decided to model this protective bottom plate.
It is intended to be printed from TPU. For mounting you will need a bit longer screws - I used M2x5mm screws and they work perfectly. I also opted to use metal screws instead of the plastic ones that were included, since in my experience the plastic ones break very easily.
It is intended to be printed from TPU. For mounting you will need a bit longer screws - I used M2x5mm screws and they work perfectly. I also opted to use metal screws instead of the plastic ones that were included, since in my experience the plastic ones break very easily.
Similar models
thingiverse
free
![bottom plate for parrot ar drone 2 by 3dlyx](/t/9007224.jpg)
bottom plate for parrot ar drone 2 by 3dlyx
... some led's inside.
depending on your print, it might be neccessary to make the hole for the groundcam a little bit wider.
thingiverse
free
![MiSTer FPGA Top and Bottom Plate Case by ToddsNerdCave](/t/8242245.jpg)
MiSTer FPGA Top and Bottom Plate Case by ToddsNerdCave
... to print this out, i offer it for sale with hardware at my shop: https://retrofrog.net/products/mister-case-top-and-bottom-plate
thingiverse
free
![GepRc 3000 Long Range Battery Bumper by das_babbs](/t/8341375.jpg)
GepRc 3000 Long Range Battery Bumper by das_babbs
...e battery. it sits on top of the foam and has a 3mm bottom to help absorb any impact.
roughly measures 40mm x 72mm x 25.5mm tall.
thingiverse
free
![Stylish Blinds Bottom Bracket by acmegeek](/t/8171308.jpg)
Stylish Blinds Bottom Bracket by acmegeek
...oking for one of these because the plastic pin broke off of yours. this will solve that issue forever and make it easy to remove.
thingiverse
free
![K8200 cover bottom plate by elgrande](/t/9013462.jpg)
K8200 cover bottom plate by elgrande
... board. finally, add the cover again.
note the two middle screes are supposed to be the weakest part in the chain - litteraly ;-)
thingiverse
free
![PM300 bottom plate protector/screw protector by notalP](/t/8935598.jpg)
PM300 bottom plate protector/screw protector by notalP
...tom plate getting deformed and therefore not usable in a crash.
http://store.red20rc.org/buy-multirotor-frame/pm300-quadcopter/
thingiverse
free
![Modular bit storage for dremel](/t/4705637.jpg)
Modular bit storage for dremel
... way through the bottom plate. the plate is thick enough to be used as a one off but i chose to use them with the clips in pairs.
grabcad
free
![Sansa Clip+ clip replacement](/t/5209452.jpg)
Sansa Clip+ clip replacement
...t least once (hence the broken clip), i will likely drop it again. so the screw in the z-direction ensures layers will not break.
thingiverse
free
![Thickx180 by goeland86](/t/8782584.jpg)
Thickx180 by goeland86
...quite well. last crash i did break an arm, but in my defense i was going full throttle straight into a tree trunk while inverted.
thingiverse
free
![Blinds adjuster wheel by Jsmiley](/t/8096981.jpg)
Blinds adjuster wheel by Jsmiley
... i used pla to make them and feel free to share with others, since i know a lot of people throw their blinds out once they break.
Stylesuxx
thingiverse
free
![CCCamp15 Keychain by stylesuxx](/t/8906207.jpg)
CCCamp15 Keychain by stylesuxx
...cccamp15 keychain by stylesuxx
thingiverse
chaos communication camp 2015 logo as a keychain.
thingiverse
free
![Acrobrat - Front Bumpers by stylesuxx](/t/8276503.jpg)
Acrobrat - Front Bumpers by stylesuxx
...acrobrat - front bumpers by stylesuxx
thingiverse
simple front bumpers for ummagawd's acrobrat frame.
thingiverse
free
![Customizer bug? by stylesuxx](/t/8662241.jpg)
Customizer bug? by stylesuxx
...izer?
calculated values not properly applied.
preview is rendering ok as image, but costomizer does not show any of the cubes,...
thingiverse
free
![Abalone replacement Ball by stylesuxx](/t/8910699.jpg)
Abalone replacement Ball by stylesuxx
...abalone replacement ball by stylesuxx
thingiverse
print two (or n*2) of those, glue them together and sand them down.
thingiverse
free
![Tevo Tarantula Filament Runout Sensor Enclosure of stylesuxx without screws by nitro974](/t/8622412.jpg)
Tevo Tarantula Filament Runout Sensor Enclosure of stylesuxx without screws by nitro974
... enclosure of stylesuxx without screws by nitro974
thingiverse
screwless version of the very good filament sensor from stylesuxx
thingiverse
free
![Customizable Pinning Tray by stylesuxx](/t/8789149.jpg)
Customizable Pinning Tray by stylesuxx
... the slots, roundness of the tray and size of the slot for the cylinder.
the attached stl is a rendering of the default settings.
thingiverse
free
![Customizable Atomizer Stand by stylesuxx](/t/8826471.jpg)
Customizable Atomizer Stand by stylesuxx
... print with just one row and one column to make sure your atomizers fit. after that you can print the stand in your desired size.
thingiverse
free
![Acrobrat - Front Cover (customizable) by stylesuxx](/t/8263849.jpg)
Acrobrat - Front Cover (customizable) by stylesuxx
...d. you can customize the cam hole diameter and position.
the attached stl is an export of the default settings of the customizer.
thingiverse
free
![Customizable Cylindrical Box by stylesuxx](/t/8888403.jpg)
Customizable Cylindrical Box by stylesuxx
...games.
the customizer will generate three stl's for you. one of the container, one of the lid and one with both, to show off.
thingiverse
free
![Buzzer Mounting Bracket by stylesuxx](/t/8282343.jpg)
Buzzer Mounting Bracket by stylesuxx
...te a bracket fitting the following components:
frame
buzzer
for good measure i would recommend to glue the buzzer to the bracket.
Protective
archibase_planet
free
![Protection](/t/948258.jpg)
Protection
...protection
archibase planet
protection
protection - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$10
![Protective shelter](/t/12846244.jpg)
Protective shelter
...protective shelter
3dexport
military protective cover for laser and soldier
3d_export
free
![protective helmet](/t/11928495.jpg)
protective helmet
...protective helmet
3dexport
this is a helmet to protect the standard human head. in the archive there are textures.
3d_export
$5
![Protected Diamonds](/t/12620263.jpg)
Protected Diamonds
...protected diamonds
3dexport
two textured diamonds protected by a fictitious-style pedestal and a glass
turbosquid
$28
![Mask helmet protection scifi futuristic protection](/t/13460235.jpg)
Mask helmet protection scifi futuristic protection
... scifi futuristic protection for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1551702)
archive3d
free
![Protection 3D Model](/t/1085880.jpg)
Protection 3D Model
...d model
archive3d
protection
protection - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
![protected pressure gauge](/t/11920482.jpg)
protected pressure gauge
...protected pressure gauge
3dexport
protected pressure gauge
turbosquid
$150
![protection character](/t/13441784.jpg)
protection character
... model protection character for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366331)
3d_export
$5
![mask medical protection](/t/11928548.jpg)
mask medical protection
...mask medical protection
3dexport
medical protection equipment 3d model
3d_export
$6
![face protect mask](/t/11929108.jpg)
face protect mask
...mask 3dexport a face protect mask is a personal protective equipment to from potentially infectious materials. file formats: sldprt,...
Bottom
turbosquid
$6
![Wooden Bottom](/t/13400069.jpg)
Wooden Bottom
...3d model wooden bottom for download as dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1631844)
turbosquid
$40
![Bottom Quark](/t/13485689.jpg)
Bottom Quark
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
![Bottom Fish](/t/13490138.jpg)
Bottom Fish
...del bottom fish for download as 3ds, fbx, blend, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1400208)
turbosquid
$15
![Pillar Bottom](/t/13505090.jpg)
Pillar Bottom
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
![Pumpkin, Flat Bottom](/t/13241197.jpg)
Pumpkin, Flat Bottom
...oyalty free 3d model pumpkin, flat bottom for download as stl on turbosquid: 3d models for games, architecture, videos. (1348299)
turbosquid
$8
![Pumpkin, Flat Bottom](/t/13241198.jpg)
Pumpkin, Flat Bottom
...oyalty free 3d model pumpkin, flat bottom for download as stl on turbosquid: 3d models for games, architecture, videos. (1348289)
turbosquid
$45
![Fancy flared bottom](/t/13456525.jpg)
Fancy flared bottom
...free 3d model fancy flared bottom for download as max and pac on turbosquid: 3d models for games, architecture, videos. (1471223)
turbosquid
$9
![Bottom Bouncer and Worm](/t/13404523.jpg)
Bottom Bouncer and Worm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
![Tank Top Bottoms 3D Model](/t/141132.jpg)
Tank Top Bottoms 3D Model
...tank top bottoms 3d model
3dexport
tank top bottoms
tank top bottoms 3d model bkl1989 63245 3dexport
cg_studio
$69
![The bottom of the lake scene3d model](/t/680084.jpg)
The bottom of the lake scene3d model
...3d model
cgstudio
.max - the bottom of the lake scene 3d model, royalty free license available, instant download after purchase.
Plate
archibase_planet
free
![Plates](/t/948955.jpg)
Plates
...plates
archibase planet
plates and dishes plate
plates - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
![plate](/t/11437983.jpg)
plate
...plate
3dexport
plate
archibase_planet
free
![Plates](/t/952447.jpg)
Plates
...plates
archibase planet
plates and dishes plate kitchen ware
plates - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Plates](/t/952470.jpg)
Plates
...plates
archibase planet
plate plates and dishes crockery
plates 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Plate](/t/951993.jpg)
Plate
...plate
archibase planet
dinner-plate plate kitchen ware
plate n070808 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$6
![plate](/t/11459393.jpg)
plate
...plate
3dexport
design of plate
3d_export
$5
![plate](/t/11461320.jpg)
plate
...plate
3dexport
plate lowpoly
archibase_planet
free
![Plates](/t/948439.jpg)
Plates
...plates
archibase planet
plate dish kitchen-ware
plate - 3d model for interior 3d visualization.
3ddd
$1
![Plates](/t/607613.jpg)
Plates
...plates
3ddd
полка , тарелка
african plates
archibase_planet
free
![Plate](/t/946653.jpg)
Plate
...plate
archibase planet
plate kitchen ware
plate - 3d model (*.gsm+*.3ds) for interior 3d visualization.