Thingiverse
THE Tweezerer by DrLex
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a remix of THE Tweezer by Fredsena. This one has stabilising tabs to prevent the tips from wiggling around while holding an object (inspired by another tweezer by aab60).
Update v2 (2016/09/25): I adjusted the tips to ensure a solid grip on even the thinnest of objects. (The original model had small bulges on the tips, which made it difficult to get a good grip on e.g. sheets of paper or adhesive tape).
This should be an easy print as long as your printer doesn't have problems with 45° overhangs.
Update v2 (2016/09/25): I adjusted the tips to ensure a solid grip on even the thinnest of objects. (The original model had small bulges on the tips, which made it difficult to get a good grip on e.g. sheets of paper or adhesive tape).
This should be an easy print as long as your printer doesn't have problems with 45° overhangs.
Similar models
thingiverse
free
Tweezers by Devstroyer
...rip of the metal tweezers. the interlocking teeth in the middle serve the functional purpose of aligning the tip of the tweezers.
thingiverse
free
tweezers / Pinzette by RBX1_FF
...tweezers / pinzette by rbx1_ff
thingiverse
tweezers with a special tip for more grip.
pinzette mit speziell angepasster spitze.
grabcad
free
Tweezers
...tweezers
grabcad
needle tip tweezers
grabcad
free
Tweezers Organizer
...ith different tips. the slots are wide enough to view the tweezers tips and to accept different sized tweezers in a friction fit.
thingiverse
free
iFixit Reverse Tweezers Replacement Tip by electronMemory
...hole sizes for the screws to bite into.
hand sand after installing into the tweezers to get a flush fit and perfectly mated tips.
thingiverse
free
Tweezer holder 1x by BostH
...e tweezer is well protected. i built in original tip cover.
tweezer holder can be mounted with double sided tape, hot glue or ...
thingiverse
free
Tweezer Rack by fughilli
...p tweezers, and 1x hook tweezers. i designed it to fit these tweezers from amazon, and a few mismatched ones i had lying around.
grabcad
free
Tweezers Weller RTx Tips Poor Man Tweezers
...s-rtm-series/
https://si.farnell.com/c/tools-production-supplies/soldering-stations-accessories?st=weller+rt&showresults=true
thingiverse
free
Simple electronic tweezers by Mycro
...used to hold small electronic components. preferred material would be abs. width of the tweezers are increased for a better grip.
thingiverse
free
"Ceramic" Tweezer Tips Replacements by e7711bbear
...tronic tweezers.
they are tricky to print. on an fdm printer, use 0.5mm layers and a brim. let the design fully cool on its own.
Drlex
thingiverse
free
MAGNET THIEF by DrLex
...magnet thief by drlex
thingiverse
magnet
thingiverse
free
Mini M3 hex key wrench by DrLex
...lex
thingiverse
this is a simple key-shaped wrench for m3 nuts, for those times when space is cramped. the socket is 14 mm deep.
thingiverse
free
Piggybank Lid for Hinged Chest by DrLex by Skyline89
... hinged chest (https://www.thingiverse.com/thing:2803507)
you need the other parts from the original chest, this is just the lid.
thingiverse
free
Display Stand for Ball in Vine by DrLex
...9;s ball in vine, which on its own tends to roll around very easily if you leave it on a flat surface, especially non-level ones.
thingiverse
free
Dummy SATA plug by DrLex
...d eyeballing a real plug, so don't expect this to be perfectly according to specs. it is accurate enough for my needs though.
thingiverse
free
Dust cap for French power outlets by DrLex
...yle sockets with an earth pin. also included a hybrid schuko with a hole, that can be used on both the schuko and french sockets.
thingiverse
free
Paracord Vase Spool (Slic3r compatible) by DrLex
...that vase mode will work in slic3r (which fills any gaps smaller than 100 microns). for more information, see the original thing.
thingiverse
free
Lid for F-Puzzle by DrLex
...t, i provided an extra space in the lid for the fourth f. place the letters as shown in the (first) photo before closing the lid.
thingiverse
free
Mini Dualstrusion Test Gizmos by DrLex
...est and fastest. they require only about 0.5g to print, and somewhere around 5 to 8 minutes depending on your setup and settings.
Tweezerer
3d_export
$5
tweezers
...tweezers
3dexport
simple tweezers. approximately 10 cm length.
turbosquid
$3
Tweezers
...bosquid
royalty free 3d model tweezers for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1333399)
turbosquid
$3
tweezers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Tweezer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tweezers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
tweezers
...tweezers
3dexport
black bathroom parts in fbx format
3d_export
$10
Tweezers 3D Model
...tweezers 3d model
3dexport
tweezers clamp epilate care leg legs tweezer
tweezers 3d model cesar_vonc 12179 3dexport
3d_export
$19
Tweezers
...oly model game ready and 1k and 4k hd textures just buy and download. you can use for all your 3d projects 3 texture pack include
turbosquid
$15
Eyebrow Tweezers
...
royalty free 3d model eyebrow tweezers for download as blend on turbosquid: 3d models for games, architecture, videos. (1611618)
3d_export
free
flexuous tweezers
...
3dexport
i just wanted to redesign a tweezers that be more interesting.<br>you can see the dimension in the last picture.