Thingiverse
The Raptor Hand by e-NABLE by e-NABLE
by Thingiverse
Last crawled date: 3 years ago
PLEASE NOTE: While the Raptor Hand has been a very popular design for the e-NABLE community, it is no longer recommended for use, other than for testing/research purposes. Testing has shown that the gripping capabilities of this design are not as good as more recent e-NABLE designs.
The currently recommended e-NABLE hand designs are the Phoenix v2, Unlimbited Phoenix, or Osprey.
UPDATE, 4/3/2015: Updated finger snap pins (DistalPins2 [x1.stl) for tighter fit. Replaced the gauntlet with new parts, now called "Bracers". Five different shapes of bracer are available (type A-E).
UPDATE, 3/30/2015: Updated distal phalanges to include stronger tie-off bars.
UPDATE, 11/12/2014: Added a PDF Assembly Instruction Manual, courtesy of Mike Agronin of Direct Dimensions. Thanks, Mike!
UPDATE, 11/1/2014 : The elastic tie-off bars have been removed. The elastics now tie-off at the upper rear portion of the palm, right above where the non-flexible cords feed through to the tensioner pins. See photos for details.
We are very pleased to introduce the Raptor Hand by e-NABLE, designed collaboratively by some of e-NABLE’s top designers!
The Raptor Hand is intended to bring together the best and most widely tested ideas from a year of crowd sourced innovation.
The objectives in designing the Raptor Hand were as follows:
To simplify fabrication and assembly and repair for makers and recipients alike
To provide a platform and reference design for future innovations, incremental and radical
To identify a core features set and standardized dimensions embodied in accessible 3D models with progressive licensing terms that will ensure widespread availability and future development.
e-NABLE's prior "go to" designs included the Cyborg Beast, the Talon hand, the Ody hand and the Talon Beast. To these classics, the Raptor Hand by e-NABLE adds the following features:
Easier and quicker printing (no supports required)
Easier and quicker assembly (no Chicago Screws required, simplified cord installation)
An improved tensioning system (modular design, allowing for easier future development)
Improved documentation (coming soon)
All of the parts needed for assembly can be found easily in most areas, but if you prefer to get everything in one place, 3D Universe offers kits with all of the assembly materials needed for producing a Raptor Hand: http://shop3duniverse.com/collections/3d-printable-kits/products/raptor-hand-by-e-nable-assembly-materials-kit
For more information on where to connect with people who can help someone in need with sizing, printing and/or assembly a mechanical hand please join the e-NABLE Google+ Community entitled, e-NABLE:https://plus.google.com/communities/102497715636887179986
For more information and stories:http://enablingthefuture.orghttps://www.facebook.com/enableorganization
The currently recommended e-NABLE hand designs are the Phoenix v2, Unlimbited Phoenix, or Osprey.
UPDATE, 4/3/2015: Updated finger snap pins (DistalPins2 [x1.stl) for tighter fit. Replaced the gauntlet with new parts, now called "Bracers". Five different shapes of bracer are available (type A-E).
UPDATE, 3/30/2015: Updated distal phalanges to include stronger tie-off bars.
UPDATE, 11/12/2014: Added a PDF Assembly Instruction Manual, courtesy of Mike Agronin of Direct Dimensions. Thanks, Mike!
UPDATE, 11/1/2014 : The elastic tie-off bars have been removed. The elastics now tie-off at the upper rear portion of the palm, right above where the non-flexible cords feed through to the tensioner pins. See photos for details.
We are very pleased to introduce the Raptor Hand by e-NABLE, designed collaboratively by some of e-NABLE’s top designers!
The Raptor Hand is intended to bring together the best and most widely tested ideas from a year of crowd sourced innovation.
The objectives in designing the Raptor Hand were as follows:
To simplify fabrication and assembly and repair for makers and recipients alike
To provide a platform and reference design for future innovations, incremental and radical
To identify a core features set and standardized dimensions embodied in accessible 3D models with progressive licensing terms that will ensure widespread availability and future development.
e-NABLE's prior "go to" designs included the Cyborg Beast, the Talon hand, the Ody hand and the Talon Beast. To these classics, the Raptor Hand by e-NABLE adds the following features:
Easier and quicker printing (no supports required)
Easier and quicker assembly (no Chicago Screws required, simplified cord installation)
An improved tensioning system (modular design, allowing for easier future development)
Improved documentation (coming soon)
All of the parts needed for assembly can be found easily in most areas, but if you prefer to get everything in one place, 3D Universe offers kits with all of the assembly materials needed for producing a Raptor Hand: http://shop3duniverse.com/collections/3d-printable-kits/products/raptor-hand-by-e-nable-assembly-materials-kit
For more information on where to connect with people who can help someone in need with sizing, printing and/or assembly a mechanical hand please join the e-NABLE Google+ Community entitled, e-NABLE:https://plus.google.com/communities/102497715636887179986
For more information and stories:http://enablingthefuture.orghttps://www.facebook.com/enableorganization
Similar models
thingiverse
free
Raptor Reloaded by e-NABLE by e-NABLE
...dded fingertip with finger nail that can be painted, added link to detailed print and assembly instructions on instructables. ab
thingiverse
free
E-Nable Size Gauge
...e size gauge
thingiverse
this is a size gauge for e-nable hands. it works for models phoenix v2, unlibited, and raptor reloaded.
thingiverse
free
e-NABLE Phoenix Hand v2 - Thermo gauntlet with ratchet by Yair_Herbst
...sioner related parts.
the design was made as part of the work we do in haifa3d (the israeli chapter of e-nable) and the technion.
thingiverse
free
Phoenix Talons
...structions document uploaded in thing files contains detailed assembly information and an overview of everything discussed here.
thingiverse
free
e-NABLE Phoenix Hand v2 - Thumbless by Yair_Herbst
...o fit only 4 fingers.
the design was made as part of the work we do in haifa3d (the israeli chapter of e-nable) and the technion.
thingiverse
free
Scalable Tensioner Pin for the e-NABLE Raptor Reloaded Hand by epatel
...to print a hand herehttp://www.signupgenius.com/go/20f0a48aeaf2da2f58-1000 update: added rounded corners, similar to the original tensioner...
thingiverse
free
Modified Gripper Box components for the e-NABLE Phoenix hand by JohnDiamond
...e phoenix hand including the assembly instructions can be found at http://www.enablecommunityfoundation.org/designs/phoenix-hand/
thingiverse
free
Finger/thumb assembly jig for an e-NABLE Phoenix prosthetic hand by JohnDiamond
...alignment with the proximal phalanges (also referred to as a phalanx) so that a snap pin can be pushed or driven in to join them.
thingiverse
free
e-NABLE keychain by JohnDiamond
...hand finger with "e-nable" embossed on both sides of the fingertip. this is intended as a giveaway trinket at an event.
thingiverse
free
e-NABLE Phoenix Hand v2 - Superman by Yair_Herbst
... unlimbited gauntlet.
the design was made as part of the work we do in haifa3d (the israeli chapter of e-nable) and the technion.
Nable
3ddd
$1
Mangrove - Roche Bobois
...95 x h. 170 x p. 46 cm. mangrove nable l. 90 x h. 90 x p. 45 cm....
thingiverse
free
Bracelets e-nable
...bracelets e-nable
thingiverse
bracelet association e-nable
thingiverse
free
Jeton Caddie E-Nable
...jeton caddie e-nable
thingiverse
jeton de caddie association e-nable
thingiverse
free
e-Nable Bookmark by Greg76
...e-nable bookmark by greg76
thingiverse
bookmark with e-nable theme.
easy to print and resizable.
thingiverse
free
e-NABLE paperclip by JohnDiamond
...e-nable paperclip by johndiamond
thingiverse
paperclip featuring one of the logos used by the e-nable community
thingiverse
free
Pencil e-nable attachment by Gtrautman1
...n1
thingiverse
this is for the e-nable c.r.e.a.t.e t.i.m.e january 2016 challenge. it is an attachment for the e-nable hand....
thingiverse
free
e-NABLE keychain by JohnDiamond
...hand finger with "e-nable" embossed on both sides of the fingertip. this is intended as a giveaway trinket at an event.
3dbaza
$2
Nable Table Lamp (338771)
...nable table lamp (338771)
3dbaza
nable table lamp 3d model<br>l 700mmv250mmh1000mm
thingiverse
free
Phone support E-nable by Tarin67
...phone support e-nable by tarin67
thingiverse
support phone logo e-nable
thingiverse
free
e-NABLE Keyring by franklima260
...ngiverse
a simple keyring for e-nable outreach giveaways.
this is a remix of this thing: http://www.thingiverse.com/thing:808889
Raptor
3ddd
free
raptor
...raptor
3ddd
динозавр
turbosquid
$390
raptor
...r
turbosquid
royalty free 3d model raptor for download as ma on turbosquid: 3d models for games, architecture, videos. (1616270)
turbosquid
$60
Raptor
...
turbosquid
royalty free 3d model raptor for download as fbx on turbosquid: 3d models for games, architecture, videos. (1211946)
turbosquid
$25
Raptor
...urbosquid
royalty free 3d model raptor for download as blend on turbosquid: 3d models for games, architecture, videos. (1196384)
turbosquid
$39
Raptor
...d
royalty free 3d model raptor for download as blend and fbx on turbosquid: 3d models for games, architecture, videos. (1710279)
turbosquid
$30
Raptor
...d
royalty free 3d model raptor for download as obj and blend on turbosquid: 3d models for games, architecture, videos. (1304436)
turbosquid
$49
Raptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Raptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Raptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Raptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Hand
3d_export
$8
hand
...hand
3dexport
fantasy hand
3d_export
$5
hand
...hand
3dexport
male hand
3d_export
$5
hand
...hand
3dexport
realistic male hand
3d_export
$5
hand
...hand
3dexport
hand with nails and structure
archibase_planet
free
Hand
...hand
archibase planet
hand
hand n190111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Hand
...hand
3ddd
hand
модель руки будды
3d_export
$5
hand
...hand
3dexport
it is my wrist of hand and this is on 3d sculpt
3d_export
$5
hand
...hand
3dexport
realistic male hand obj file
3d_export
$7
hand-006 rigged hand
...hand-006 rigged hand
3dexport
rigged right hand 3d model additional textures for pbr rendering included
3d_ocean
$6
Hand
...
this 3d models of the hands, made in 3ds max, has textures(.jpg), materials(.mat), rigged, the models in .max, fbx, obj format.
E
3ddd
$1
WALL-E
...wall-e
3ddd
wall-e , робот
wall-e
3d_export
$100
e-rickshaw
...e-rickshaw
3dexport
e-rickshaw- it have 3d model of passenger e-rickshaw
3d_ocean
$12
Wall E
...wall e
3docean
character robot wall e
its a 3d model of wall e….
turbosquid
$68
Model-E Droids 2-E Q-E Star Wars
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$45
Model-E Droids 2-E Q-E Star Wars3d model
....3ds .c4d .obj .vue - model-e droids 2-e q-e star wars 3d model, royalty free license available, instant download after purchase.
3d_export
$100
e-rickshaw
...e-rickshaw
3dexport
e-rickshaw design for passenger it have all mechanical component
design_connected
$7
Cone E
...cone e
designconnected
bonaldo cone e computer generated 3d model. designed by pasini, ennio.
3ddd
$1
Wall-E NEW
...wall-e new
3ddd
wall-e , робот
wall-e
design_connected
$29
Extrasoft E
...extrasoft e
designconnected
living divani extrasoft e computer generated 3d model. designed by lissoni, piero.
3ddd
$1
E-Turn
... скамейка
современная скамейка фирмы kundalini.
модель e-turn.
дизайнер brodie neil.
размеры: h 42 cm l 185 cm w 54 cm