The InDuctor Ender 5+ (BLTouch in the duct) by mikeybme

Last crawled date: 2 years, 10 months ago

UPDATED VERSIONS HERE:https://www.thingiverse.com/thing:4881811
-BLTouch mounted in the duct in line with the nozzle optimizing bed probing area.
-Large probe area; x 0-350, y 0-308mm.
-Works with stock parts, only need hardware (m2+m3 screws).
-Single or dual radial fans.
-4010 or 4020 fans.
-Lightweight 30G@20%infill, 45g@100%infill.
-Parts cooling fan cools the parts, not the nozzle.
-Large cooling area helps prevent cold spots and temperature differences that may cause warping or poor layer adhesion .
-Stock parts cooling duct can bridge to 70mm quite well. Can bridge up to 100mm, but with some droppings.
-Easy install, no need to remove hotend.
Probe offset x-0 y-42.
Also added a file with supports as the generated ones just didn't jive.
And one with thicker sides.
And a Spongebob Version.