The Grill trailer

Last crawled date: 5 months ago

I started off the Grill trailer with making the trailer base with a 2 inch border around the 20 by 7 ft base. I then made the kitchen counter splitting the front triangular part from the main base. The counter was fitted with a steel sink and 3 41x30 inch drawers made out of wood just like the top. The rest of the cabinet was also metal. I used the the Radial Block Swing as a flag holder on top of the counter as many trailers do carry flags an this part was suited well with holding the pole at an angle. In the front I used the scaled up trapezoid block with the quarter cut out as a holder for the gas tank. The tank was also modified to be a bit bigger and taller by elongating its body and scaling it to suit better with trapezoid black. The tank was then placed inside the trapezoid black and put in the front triangular area. Meanwhile in the back I made wheels using the big rim part and adding a 43 inch rubber tire to it and connecting two wheels using a self made wheel rod. In the front I also added a small rod extension with a smaller 8 inch wheel for easier maneuvering and more support, this front part consisted of two smaller wheels and a rod that held them together between the rod extension connected to the base. For the wheels I also made some covers as on a real trailer . The back of the base was also decorated with some red stop lights and a place for a license plate. As for the main part of this model the grill was made using the tooling cylinder which I modified by cutting out a few dozen slots on its quarter cut out inside . The grill was held up by the channel slot piece which perfectly help up the circular bottom of the grill. To accompany the grill i made a grill lid using a quarter of a 52 inch circle which was shelled and decorated with a wooden handle and a thermometer. In order to attach the lid I had to make 1 inch holes in the corner of the lid sides and the tooling cylinder sides where the lid was supposed to be attached. To connect these I made some 1 inch nail like connectors fixed by bolts. Lastly i added the hitch pivot piece to serve as a docking part to connect the trailer to another vehicle.
materials:
For the grill i used cast iron and same for the support pieces.
For the wheel covers its steel, the same as for the base just textured differently. The tank and trapezoid black were both colored with spray paint in white and grey.
The back lights are red plastic and glass.
The sink is stainless steel just like the faucet.