Tevo Tornado Leg by Benjamin76

Last crawled date: 3 years, 1 month ago

I have seen several legs for printers all were 100% printed. I decided to come up with some that used 1 inch PVC for the height and printed parts to attach to the printer. They can be mounted inside the frame or outside the frame and can be positioned anywhere along the frame. I only made 4 and just high enough to put the control box under. The file includes the top part that mounts to the printer and a bottom cap. I cut and glued some non-slide tool drawer material onto the bottom caps to keep the printer from sliding around.
I thought it would cause to to wobble more being lifted, however with the legs mounted to the outside it gives the printer a wider stance.