Tevo Tarantula Obiter Extruder Mount by uncholowapo

Last crawled date: 3 years, 4 months ago

I remixed the Mach Cube mount for the Orbiter extruder and the Requiem X-carriage to bring you all this monstrosity. It's been 20 years since I touched any kind of CAD program in high school so the STL's might look messy but it prints well none the less.
You are going to have a VERY tight clearance with the V-roller and the fan but it should still be able to fit without the fan wires rubbing up against the wheel.The front part prints with the fan shroud facing down and the wheel body prints flat. They both print without supports which is nice.
You will need 2 M3 Heat Inserts to press into the top for the extruder to screw down into.
One thing to note: I used an E3D V6 heatsink that has the hole and threads for the pneumatic fitting in order to get the extruders upside down heatbreak to go down and have the it lay flat like in the picture. I used a small piece of bowden tube to fill in the gap between the hotend and the extruder.
I'm still learning Fusion360 and am trying to call back my knowledge from using Inventor back in school so hopefully I'll keep getting better at this.