TEVO Little Monster - Enclosure by Elzariant

Last crawled date: 3 years ago

Here's my enclosure kit for TEVO Little Monster
You need 2.5mm-thick-polycarbolate panels (such as plexyglass) in which you must cut :
6 x (1000 x 66mm)
2 x (1000 x 159mm)
2 x (1000 x 319mm)
Note : You can also use from 2.4 to 2.6mm thick panels
You need to print :
min 6 x Integrator4door
min 6 x Hinge
min 12 x Integrator
min 12 x Corners
I've added gauges to help you drilling holes at the correct position.
Hardware needed (per printed piece) :
Hinges :
6 x M3x30mm bolts
4 x M4x12mm bolts
4 x M4 nuts
2 x M4 washers (0.8 to 1mm thick)
Corners :
4 x M4x12mm bolts
4 x M4 nuts
Integrator
2 x M4x12mm bolts
2 x M4 nuts
Integrator4Door
4 x M4x12mm bolts
2 x M4 nuts
2 x M4 T-nuts
Door Handles
4 x M4x12mm bolts
2 x M4 nuts
4 Cylinder Magnets (3mm diameter, 5mm length)
2018-03-07 : Added door handle with holes for small magnets.
2018-05-25 : Added a zip package for 3mm-thick panels
2018-09-21 - Added a zip package for 4mm-thick panels
2019-10-30 - Added STEP versions for 3 and 4mm