terraPin Bijou "Incher" - 25.4mm Pinhole Camera Extension by schlem 3d model
Warning. This content is not moderated and could be offensive.
weapons
3dmdb logo
Thingiverse
terraPin Bijou "Incher" - 25.4mm Pinhole Camera Extension by schlem

terraPin Bijou "Incher" - 25.4mm Pinhole Camera Extension by schlem

by Thingiverse
Last crawled date: 3 years ago
The terraPin Bijou is a pinhole camera for 120 film with a 6X4.5 frame, in a portrait format in normal orientation.
Designed for 0.22mm diameter pinhole
f/115 center, f/132 nominal
Horizontal angle of view: 78.5°
Vertical angle of view: 95.6°
This is a "fast", wide-angle extension for the terraPin Bijou. The Incher slides into the camera body with the terraPin Slider system. The shutter is a captive sliding vane that allows for easy control over exposure. The recessed design prevents interference if you prefer to uncover/cover the aperture with your fingertip.
Because of the short "focal length" of this extension, there is significant light "falloff" at the edges of the frame and the corners in particular. The geometric center of the frame is f/115, and a 28mm diameter ring around this point is f/132, which gives a good compromise between the frame's extremes of f/115 - f/196 (see diagram)
ATTENTION
This work is licensed under the Creative Commons - Attribution - Non-Commercial license. This license applies only to the files and documents available for download from the Thing Files section of this Thing.All other related content (photographs, videos, and verbiage such as contained in "Description" or "Instructions" ) are excluded from this license. with all rights reserved, unless specifically available for download This notice constitutes a clarification, not a change, to licensing for this design.

Tags