Thingiverse
teinturman's 3D Printer enclosure by teinturman
by Thingiverse
Last crawled date: 3 years ago
The teinturman's 3D Printer enclosure is an easy to build enclosure for your reprap 3D printer :
The features of this enclosure are :
Everything fits within a 50x50x50 square.
Cheap enclosure using common materials and printed parts.
Easy to build, with detailed instructions.
You can see the inside without opening the door.
The door is a sliding door , easy to open and do not need any space upper, on the right or left when opened.
The front side can be entirely removed easily to perform maintenance activity.
Integrated lcd display Case.
Spool Holder , guide and filter.
The enclosure will need minimal material :
Wood cut at the Shop , to save your time : (20€)
3* Medium(10mm) 48cm x 48cm ( support and sides)
1* Medium(10mm) 49cm x 50cm (background)
2* Medium (10mm) 37cm x 50cm (front and upper cover)
1*Medium ( 10mm) 17cm x 50cm ( Control panel)
2 *10mm x 10mm x 35 little pieces of wood or other.
6 M3 screws and rods.
Plexiglass 1.5 x 35 x 45 (transparent) (9€)
100 screws 3.5mm x 13mm( 5€)
Corners : i bought them to save my time and Filament they are very cheap. (They could also be printed ) (3€)
Printed parts ( black Pla filament)
The detailed instructions on how to build are in the joined pdf file.
I built it for my Reprap ( I3 Prusa from emotion tech V1.5 rework ) but it should still be valid for any reprap printer.
I also have designed a spool holder and a perfect filament guide to fit with the enclosure and the i3 prusa . i will publish these soon .
Some additional Build Notes :
The plexiglas needs to be 35 x 45 , not 35x 50 ( i will update the pdf later)
The upper cover can be cut ( 1/3 and 2/3 ) to allow access via the roof of the box the slides are attached to 1/3 of the upper cover, and the remaining 2/3 is used as a removable cover to acess the back of the printer.
some slides are attached with a single screw, you can add some glue to make them fit better.without turning around.
Note : you may want to check my recommended spool Holder :http://www.thingiverse.com/thing:1640529
and my Nema 17 Filament guide :http://www.thingiverse.com/thing:1647053
The features of this enclosure are :
Everything fits within a 50x50x50 square.
Cheap enclosure using common materials and printed parts.
Easy to build, with detailed instructions.
You can see the inside without opening the door.
The door is a sliding door , easy to open and do not need any space upper, on the right or left when opened.
The front side can be entirely removed easily to perform maintenance activity.
Integrated lcd display Case.
Spool Holder , guide and filter.
The enclosure will need minimal material :
Wood cut at the Shop , to save your time : (20€)
3* Medium(10mm) 48cm x 48cm ( support and sides)
1* Medium(10mm) 49cm x 50cm (background)
2* Medium (10mm) 37cm x 50cm (front and upper cover)
1*Medium ( 10mm) 17cm x 50cm ( Control panel)
2 *10mm x 10mm x 35 little pieces of wood or other.
6 M3 screws and rods.
Plexiglass 1.5 x 35 x 45 (transparent) (9€)
100 screws 3.5mm x 13mm( 5€)
Corners : i bought them to save my time and Filament they are very cheap. (They could also be printed ) (3€)
Printed parts ( black Pla filament)
The detailed instructions on how to build are in the joined pdf file.
I built it for my Reprap ( I3 Prusa from emotion tech V1.5 rework ) but it should still be valid for any reprap printer.
I also have designed a spool holder and a perfect filament guide to fit with the enclosure and the i3 prusa . i will publish these soon .
Some additional Build Notes :
The plexiglas needs to be 35 x 45 , not 35x 50 ( i will update the pdf later)
The upper cover can be cut ( 1/3 and 2/3 ) to allow access via the roof of the box the slides are attached to 1/3 of the upper cover, and the remaining 2/3 is used as a removable cover to acess the back of the printer.
some slides are attached with a single screw, you can add some glue to make them fit better.without turning around.
Note : you may want to check my recommended spool Holder :http://www.thingiverse.com/thing:1640529
and my Nema 17 Filament guide :http://www.thingiverse.com/thing:1647053
Similar models
thingiverse
free
Nema17FilamentGuide by teinturman
...or 3d printer :http://www.thingiverse.com/thing:1637043
and my recommended spool holder :http://www.thingiverse.com/thing:1640529
thingiverse
free
Teinturman 's spool holder by teinturman
... for 3d printer :http://www.thingiverse.com/thing:1637043
and my nema 17 filament guide :http://www.thingiverse.com/thing:1647053
thingiverse
free
Filament Guide by revb
...erse
this is my deign for a 3mm filament guide for my reprap repscrap printer fitted with a top mounted horizontal spool holder.
thingiverse
free
Flashforge finder spool holder with filament guide by kvasbo
...g the spool compartment cover, and guide the filament through the hole. i have used this for many builds, and it works perfectly.
thingiverse
free
Under shelf filament spool holder hook
...er my 3d printer. it is very handy and easy to use. you will need 2 m3 20-25mm screws and 3 m3 screws to attach it to your shelf.
thingiverse
free
Filament holder A8 by Tiagomfsantos
...he need for another ones.
the design in the pictures had the holes too little soo i enlarged theme in the files before uploading.
thingiverse
free
Delta Kossel Top Spool Holder
...for the spool clamp plus a steped wedge or similar to hold the centre of the spool, lots available...
thingiverse
free
RepRap NEO Filament Holder small Spools by hanenseilers
...ap. my one's diameter is 30mm for 1kg spool. this filament holder can hold it and can be mounted at the back oif the printer.
thingiverse
free
Filament Guide for M8 road or 5⁄16″ Screws by UncleSash
... swings free on the screw, so it goes with the movement of the printer and the filament.
so i created one.
my first release here!
thingiverse
free
Filament spool holder by Nexion
... filament spool holder i made for my reprap i3 printer i bought off ebay.
6mmx2.5cm frame opening, 3cm i.d. spool holder opening.
Teinturman
thingiverse
free
Customizable Atomizer support by teinturman
...zable atomizer support by teinturman
thingiverse
this is an ultra simple atomizer stand, that can be customized to your needs...
thingiverse
free
Nema17FilamentGuide by teinturman
...or 3d printer :http://www.thingiverse.com/thing:1637043
and my recommended spool holder :http://www.thingiverse.com/thing:1640529
thingiverse
free
Teinturman 's spool holder by teinturman
... for 3d printer :http://www.thingiverse.com/thing:1637043
and my nema 17 filament guide :http://www.thingiverse.com/thing:1647053
thingiverse
free
Parametric Pipe Adapter by teinturman
...internal diameter , external diameter and height of each size, then print the adapter !
you can also add bevel percentage value.
thingiverse
free
Photo Stand Repaired by teinturman
...e/8718475814511/support-de-fond-pour-studio-photo-300-cm-sans-toile?gclid=eaiaiqobchmih5sy0_hh1givcxibch00mgikeaqyasabegk2jvd_bwe
thingiverse
free
Plate for Hama Star 61 tripod by teinturman
...screw locked on the plate, even when there is no camera on it.
i use 2,5*10mm wood screws to lock the 2 parts together.
enjoy ...
thingiverse
free
Caribean Pirates Compass by teinturman
... the thing your realy prefer...
ta ta ta .... ta ta ta ta ..... ta .... ta ti ta .... ta ..... ta ta taaaaaaaa.
thingiverse
free
Customizable Atomizer box for Travellers by teinturman
...close with a click ... ( thanks to the 2 spheres )
nothing special for the build... i used 20% infill.
supports are not needed...
thingiverse
free
Mini Video Skate by teinturman
...l probably work as well, but being less steady...
i used 1 m3, 4cm rod.
and 5 small wood screws ( 13mm)
can't be cheaper.
...
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.