Thingiverse
TBS Source Antenna LED Buzzer Mount (Version2 TPU) by Emboli
by Thingiverse
Last crawled date: 3 years, 1 month ago
I designed this mount specifically for the TBS Source One. Version II is for TPU and includes zip tie holes (small version) plus an angled antenna mount so the antenna points at 45 degrees.
Also includes
TBS 5g8 Antenna Mount (m2 screws for holes). You can then rest a Uxii Stubby on the holder or go for the Longer Full Antenna Option.
Buzzer, LED combo hole that slots into place. Only the buzzer and LED are conveniently exposed on the other side
links to products used
https://www.banggood.com/Realacc-RHCP-Super-mini-AXII-Stubby-5_8GHz-1_6dBi-Antenna-For-TX-RX-Fatshark-Goggles-p-1221877.html
https://www.banggood.com/Ultra-Light-Colorful-LED-Alarm-Buzzer-WS2812B-Programable-for-RC-Models-p-1142305.html?rmmds=myorder
Also includes
TBS 5g8 Antenna Mount (m2 screws for holes). You can then rest a Uxii Stubby on the holder or go for the Longer Full Antenna Option.
Buzzer, LED combo hole that slots into place. Only the buzzer and LED are conveniently exposed on the other side
links to products used
https://www.banggood.com/Realacc-RHCP-Super-mini-AXII-Stubby-5_8GHz-1_6dBi-Antenna-For-TX-RX-Fatshark-Goggles-p-1221877.html
https://www.banggood.com/Ultra-Light-Colorful-LED-Alarm-Buzzer-WS2812B-Programable-for-RC-Models-p-1142305.html?rmmds=myorder
Similar models
thingiverse
free
TBS Source Antenna LED Buzzer Mount by Emboli
...tml
https://www.banggood.com/ultra-light-colorful-led-alarm-buzzer-ws2812b-programable-for-rc-models-p-1142305.html?rmmds=myorder
thingiverse
free
TBS Source GPS Antenna LED Buzzer Mount (Version3) by Emboli
...tml
https://www.banggood.com/ultra-light-colorful-led-alarm-buzzer-ws2812b-programable-for-rc-models-p-1142305.html?rmmds=myorder
thingiverse
free
Lumenier AXII Stubby Mount TPU Bfight210 by Hackbert
...controller-spare-part-mcx-to-sma-rp-sma-antenna-pigtail-cable-10cm-p-1154316.html?rmmds=search&id=523627&cur_warehouse=cn
thingiverse
free
All-in-one AcroBrat VTX SMA Mount + RX + LED + Buzzer Mount by pathfinderzero
... pro pigtail.
if you don't need led and buzzer mount, check out my other version. https://www.thingiverse.com/thing:3039508
thingiverse
free
Storm Racing GONDI LED+Buzzer Mount by funganthony
...for storm gondi x5. suitable for hglrc led+buzzer or similar module....
thingiverse
free
Babyhawk Buzzer Mount by fLin7
...ver the vent holes at the backside of the camera
hole to fix the receiver antenna away from the props
goes directly on the screws
thingiverse
free
ZMR250 tail with LED/BUZZER and SMA mount
...in-1-ws2812b-led-and-5v-active-buzzer-for-fpv-naze32-skyline32-flight-controller-p-1012950.html?rmmds=search&cur_warehouse=cn
thingiverse
free
HGLRC LED and Buzzer Mount for A-MAX QAV-R 130MM by pathfinderzero
...//www.banggood.com/super-mini-1_38g-ws2812-colorful-led-with-5v-active-alarm-buzzer-support-cleanflight-betaflight-p-1131891.html
thingiverse
free
XHOVER Win5 LED+Buzzer+CAP mount by funganthony
...torshttps://www.banggood.com/10-pcs-25v-330uf-1000uf-multirotor-capacitors-for-racing-drone-p-1215702.html?p=tw132373677892016118
thingiverse
free
AcroBrat VTX SMA / TBS Unify Pro and RX Antenna Mount (No LED / No Buzzer) by pathfinderzero
...attern to give it more strength.
check out my other version with led and buzzer mount. https://www.thingiverse.com/thing:3039449
Emboli
thingiverse
free
Runcam Owl Mount by Emboli
...the tbs source one. i designed it so it can be zip tied securely into mount and then screwed with normal m2 screws into the frame
thingiverse
free
RC Drone Antenna Cap by Emboli
...ith a similar enclosure then this may fit. use it to customise the look of your drone as well
print upside down with no supports
thingiverse
free
Monitor Tool Holder by Emboli
... in the rear tray!
version 2 details:
-5mm holes x 3
-7mm hole x 1
-11m hole x 1
-12mm hole x 1
-18mm hole x 1
-rear holding tray
thingiverse
free
TBS Source Antenna LED Buzzer Mount by Emboli
...tml
https://www.banggood.com/ultra-light-colorful-led-alarm-buzzer-ws2812b-programable-for-rc-models-p-1142305.html?rmmds=myorder
thingiverse
free
TBS Source GPS Antenna LED Buzzer Mount (Version3) by Emboli
...tml
https://www.banggood.com/ultra-light-colorful-led-alarm-buzzer-ws2812b-programable-for-rc-models-p-1142305.html?rmmds=myorder
Version2
thingiverse
free
Clock Dali version2 by Ornholt
...or image. if you find a clockwork that goes counterclockwise or if you rebuild an existing clockwork, you get a really odd clock.
thingiverse
free
Spitfire landing gear right version2 by ocminimoto
...ight version2 by ocminimoto
thingiverse
just an updated drawing with a wee bit more detail and cap to glue on to hold the wheel.
thingiverse
free
Bathroom Arranger (Toothbrush Holder) Version2
...ps://www.thingiverse.com/thing:2144322.
it has bigger and more spaces for things.
edit:
uploaded a second file with more fillets.
thingiverse
free
Alien 45 degree vtx mount version2 by UtahRootBeer
...ion2 by utahrootbeer
thingiverse
redid after holes of version 1 didnt line up, changed my print angles to see what looks better.
thingiverse
free
Klingon PADD version2 from Star Trek by newdominion
... duras and his sisters with this personal access data device.
fixed issues with weird printing, also improved the button design
thingiverse
free
Wall stand for Dyson DC62 animalpro brush Version2 by iPa64
...thingiverse
version 2 of the wall stand for dyson dc62 animalpro brush.
more strong and more rounded.
(drawn it with sw vs skup)
thingiverse
free
Bag Clip with Screw Cap (Modified Version2)
...revents it from falling into the bag and the other prevents it from spinning when opening
2) the locking of the clip was improved
thingiverse
free
Cartridge for 3DS Games / DS Games - Version2
...ngiverse.com/thing:3039550.
there are two stl-files, one with custom supports, which can easily removed and one without supports.
thingiverse
free
Version2 Nitro starter adapter by NitzscheModellbau
....
if your shaft is bigger than the design allows just drill it out a little bit and tighten the screws and it should still clamp.
thingiverse
free
An E3D Chimera Bracket for Ooznest Prusa i3 Version2 by lenzjo
...ch to the bracket by a single screw and nut. the bracket is slightly wider and there is still plenty of room for air circulation.
Buzzer
thingiverse
free
Buzzer Gamusino
...buzzer gamusino
thingiverse
buzzer gamusino
thingiverse
free
buzzer by fpolster
...buzzer by fpolster
thingiverse
buzzer for video games - pc input is done with arduino
thingiverse
free
buzzer holder tyro99
...buzzer holder tyro99
thingiverse
buzzer holder tyro99
thingiverse
free
Buzzer Arduino by AriefXaloka
...buzzer arduino by ariefxaloka
thingiverse
holder for buzzer arduino
thingiverse
free
Buzzer Hoder by taboaco
... a clip for the wires
recommended for the single buzzer holder to print in tpu scaling to 95% of the original size for a tide fit
thingiverse
free
Buzzer for Realacc X210 by macabox
...buzzer for realacc x210 by macabox
thingiverse
front buzzer for realacc x210, buzzer measure: 12mm diameter
thingiverse
free
Univeral buzzer mount by bengmo
...al buzzer mount by bengmo
thingiverse
this is a buzzer holder for any 9.2mm buzzer. print in tpu and slide on over the standoff.
thingiverse
free
Buzzer (12mm) Holder by gschuto
...m) holder by gschuto
thingiverse
this is a holder for 12mm buzzer for many projects. buzzers works with many flight controllers.
thingiverse
free
Buzzer Holder for QAV250 by alemartinez
...alemartinez
thingiverse
this is a buzzer holder, perfect for naze32 and any other flight controller with connection to a buzzer.
thingiverse
free
Buzzer Mounting Bracket by stylesuxx
...te a bracket fitting the following components:
frame
buzzer
for good measure i would recommend to glue the buzzer to the bracket.
Tbs
thingiverse
free
TB
...tb
thingiverse
he is coming
thingiverse
free
TBS RaceTracker LED Gate Holder by trappy-tbs
... racetracker led gate holder by trappy-tbs
thingiverse
a holster for the tbs racetracker for the new tbs led micro racing gates.
thingiverse
free
Frame TBS by robertoalmeidarr
...frame tbs by robertoalmeidarr
thingiverse
frame tbs
thingiverse
free
TBS Source ONE V4 TBS Triumph Pro by maney_3
...tbs source one v4 tbs triumph pro by maney_3
thingiverse
tbs triumph pro mount for a tbs source one v4 frame
thingiverse
free
Christmas TB by lilskrimp
...christmas tb by lilskrimp
thingiverse
a festive version of tb
thingiverse
free
TBS VTX nano & TBS Crossfire Nano mount by maxxxior
... & tbs crossfire nano mount by maxxxior
thingiverse
tbs crossfire and tbs vtx nano onboard flight controller mount 30.5x30.5
thingiverse
free
TBS Keychain by underwonder
...tbs keychain by underwonder
thingiverse
tbs keychain with red eyes.
thingiverse
free
tbs by runaway380
...tbs by runaway380
thingiverse
non
thingiverse
free
Tbs antenna protector by Cliffstjohn
...tbs antenna protector by cliffstjohn
thingiverse
for the tbs.
thingiverse
free
TBS cookie cutter by schmiernippel
...tbs cookie cutter by schmiernippel
thingiverse
for tbs fans :-)
Antenna
thingiverse
free
Antenna tightener - For antennas with heatshrink by Flowr
...ennas with heatshrink by flowr
thingiverse
for antennas with heatshrink over connector
little bit bigger than original
antenna :
thingiverse
free
antenna by leonk
...antenna by leonk
thingiverse
antenna
thingiverse
free
ANTENNA by callsaul
...antenna by callsaul
thingiverse
antenna radio signal
thingiverse
free
T-Antenna
...t-antenna
thingiverse
this is a basic dipole antenna sleeve for 2.4ghz wifi.
thingiverse
free
Antenna Cover for Directional Antenna by ghfame
...mm diameter by 59.4mm tall. the cable cover fits inside the base cover, inverted and covers the 8mm thick cable by 102mm length.
thingiverse
free
Fpv racing Antenna protector for short antennas by dergringo
...acing antenna protector for short antennas by dergringo
thingiverse
for short antennas
for antennas to mice diameter size 32.5mm
thingiverse
free
Antenna Isolator by Hansom
...antenna isolator by hansom
thingiverse
this is a antenna isolator for wire antennas like linked dipoles or long wire antennas
thingiverse
free
Antenna Elbow by BwtLammers
...tlammers
thingiverse
antenna elbow.
this is a holder to maintain a 90º angle on the antenna.
antenna axis diameter is 4 - 4.5mm.
thingiverse
free
Antenna support by Fab3DLab
...antenna support by fab3dlab
thingiverse
antenna support for all antenna.
use tpu plastic
thingiverse
free
gcode antenna by goodpudding
...gcode antenna by goodpudding
thingiverse
antenna
Tpu
thingiverse
free
Chair TPU
...chair tpu
thingiverse
... tpu ...
thingiverse
free
Wasserauslauf TPU
...wasserauslauf tpu
thingiverse
wasserauslauf tpu
thingiverse
free
TPU-Coaster by 873chi
...oaster by 873chi
thingiverse
material = tpu
i made a separate type coaster.
since it is tpu, it has elasticity and is practical.
thingiverse
free
Laser HD TPU
...laser hd tpu
thingiverse
transtec laser hd tpu
thingiverse
free
TPU-Cube
...tpu-cube
thingiverse
foldable cube
thingiverse
free
Trampa Wand TPU
...trampa wand tpu
thingiverse
tpu cover, print base down with supports
thingiverse
free
athorbot extrudeur tpu
...athorbot extrudeur tpu
thingiverse
athorbot brother modif pour tpu ou flex
thingiverse
free
Nerf Dart TPU
...nerf dart tpu
thingiverse
nerf dart to be printed in tpu or other flexibles.
size 72x12mm
thingiverse
free
TPU Spacers
...tpu spacers
thingiverse
a collection for the spacers i've ever used.
thingiverse
free
TPU Protection serre joint
...tpu protection serre joint
thingiverse
made in tpu for my clamp
Source
thingiverse
free
Source One - wall mount
...source one - wall mount
thingiverse
wall mount for tbs source one
thingiverse
free
HomePod Source by MadeByNozzle
...ing some marks on wooden furniture due to the rubber that apple is using. this homepod source gets ride of this problem entirely.
thingiverse
free
source one socks by Dutzisphere
...source one socks by dutzisphere
thingiverse
another take on tpu socks for source one
thingiverse
free
Radioactive source holder by poblockim
...radioactive source holder by poblockim
thingiverse
this is radioactive source holder for the a-level required practical.
thingiverse
free
TBS Source One Protection Kit
...ource one arm bumpers/skids
source one soft motor mount pad
source one front bumper
source one rear unify/crossfire antenna mount
thingiverse
free
TBS Source One Accessories
...tbs source one accessories
thingiverse
a couple accessories for the tbs source one frame. should work with all versions.
thingiverse
free
source one camera mount by ninnux
...source one camera mount by ninnux
thingiverse
source one camera mount
is there 10,15,20,25 grades mount and freecad source
thingiverse
free
Arm bumper source one by jydotix
...arm bumper source one by jydotix
thingiverse
source one bumper
thingiverse
free
tbs source one toothgrinder by n2tat2ng
...tbs source one toothgrinder by n2tat2ng
thingiverse
toothgrinder source one skid
thingiverse
free
Source One Cap Holder by ikuiku
...source one cap holder by ikuiku
thingiverse
cap holder for the source one
Led
thingiverse
free
Estuche LED / LED Box by fxbob
...stuche led / led box by fxbob
thingiverse
estuche para anillo de compromiso con luz led
box for packaging jewelry with led light
thingiverse
free
10X10 LED Matrix for 6mm leds by MattCudaj
...10x10 led matrix for 6mm leds by mattcudaj
thingiverse
10x10 led matrix for 6mm leds
thingiverse
free
LED spot with power LED and heatsink. by Geogeorge
...led spot with power led and heatsink. by geogeorge
thingiverse
led spot with power led and heatsink.
thingiverse
free
LAMPADA LED
...lampada led
thingiverse
lampada a led
thingiverse
free
WS2812 Rings with 16 LEDs or 4 LED
...ors ws2812 rings (16 led) and segements (4 led). the outer diameter of the led pcb is 60mm. best printed with transparent white.
thingiverse
free
Led holder
...led holder
thingiverse
holder for led lights.
thingiverse
free
LED by guillaumedeboosere
...led by guillaumedeboosere
thingiverse
led in green, orange and red
thingiverse
free
16x16 LED MATRIX for 10mm LEDs by RBEPrinter
...16 led matrix for 10mm leds by rbeprinter
thingiverse
this is a game frame inspired led matrix plane for 16x16 10mm ws2813 leds.
thingiverse
free
4x4 led cube led holder by braden040
...4x4 led cube led holder by braden040
thingiverse
this is a 4x4 led cube led holder that i designed
hope you like it thanks
thingiverse
free
A Jig for LED strip soldering, For Lightsaber LED Strip type-5X5mm LEDs by watchmaker_lam
... led strip type-5x5mm leds by watchmaker_lam
thingiverse
a jig for led strip soldering, for lightsaber led strip type-5x5mm leds
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount