Thingiverse
Taz5-6 Stepper Encoder
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a quadrature encoder that can be mounted on the spare hole of the TAZ5-6 extruder stepper. Stick on the pattern and mount with one 3mm screw.
This is for my filament length creation but may be of use for other applications. I stick a encoder pattern to the stepper drive gear of my Taz5 and mount to OPN761N opto's to create a quadrature encoder. It gives 24 steps per revolution. The sensors run at 5 volts but the open collector outputs drive a 3v3 volt micro with the pullups on. The pattern is based on 30 degree segments. The encoder's opto's are set 60 degrees apart plus 15 degrees so the encoder transitions are at different times. This seemed to be the most reliable using the relatively broad beam of the opto's used.
The eagle files are included. Print the encoder pattern from the pdf file. I used double sided tape to attach the pattern to the bottom of the gear. Stick the white leader on first and then wrap it around.
The board is available through Oshpark.com
Cheer
KIsssys
This is for my filament length creation but may be of use for other applications. I stick a encoder pattern to the stepper drive gear of my Taz5 and mount to OPN761N opto's to create a quadrature encoder. It gives 24 steps per revolution. The sensors run at 5 volts but the open collector outputs drive a 3v3 volt micro with the pullups on. The pattern is based on 30 degree segments. The encoder's opto's are set 60 degrees apart plus 15 degrees so the encoder transitions are at different times. This seemed to be the most reliable using the relatively broad beam of the opto's used.
The eagle files are included. Print the encoder pattern from the pdf file. I used double sided tape to attach the pattern to the bottom of the gear. Stick the white leader on first and then wrap it around.
The board is available through Oshpark.com
Cheer
KIsssys
Similar models
thingiverse
free
28byj-48 Stepper mount and Gear Wheel Mount for TOM Tri Track Robot by madmike8
...el to mount the servo drive gear to.
made a couple updates.
added scad file for gear wheel.
added scad file for stepper mount.
thingiverse
free
opto encoder mount by mattvenn
...opto encoder mount by mattvenn
thingiverse
a parametric, laser cut opto encoder disk and mount.
thingiverse
free
ELS Project Brackets by Gadjet0
... and printed an adapter to fit it to the shaft of the encoder.
please make sure these parts fit your parts before you print them!
thingiverse
free
Gear Motor Drive Mount
...ut the ring of the wheel guards and mount this with 6 screws. after tjat i can install my gear motor drive.
i used m4x20 screws.
thingiverse
free
ESCAP 16mm gearmotor bracket by jbeale
...is probably the combination of two separate quadrature detectors, not quite 45 degrees apart. openscad file provided for bracket.
thingiverse
free
3d Printer Filament Length Readout
... this, maybe just an idea to do something simular would be good.
ps here is a link to my 5v to 3v3 volt converter
cheers
kisssys
thingiverse
free
BIQ Stepper D cutting tool by Takeaway3DTech
...d shaft on stepper motors for extruder drive gears belt drive gears. here is the biq tool i made to cut, file, grind my d shafts.
thingiverse
free
Geared Extruder by terenceang
...re torque instead of forking out another $40 for a geared stepper.
used the original drive drive gear and some parts from my bin.
thingiverse
free
Wade-type Extruder by vik
... for the drive gear, shorter fixing slots for the stepper, and simplified mounting for the dual 608 bearings on the driven shaft.
thingiverse
free
Robotruder for geared NEMA 17 stepper by RoBotniK
...
thingiverse
that's the robotruder (robotnik's extruder) for geared nema 17 steppers, mk8 drive gear, j-head compatible.
Taz5
thingiverse
free
Lulzbot Taz5 Enclosure by drandolph
... access to a laser cutter you can purchase a kit that includes everything except the 3d printed parts at https://printedsolid.com
thingiverse
free
Taz5 BLTouch Mount by zanthor
...ide of your extruder to anchor this. i ran the bolt through the original nut and then captured the bltouch mount with a 2nd nut.
thingiverse
free
TAZ5 Low Friction Spool Holder by uCHobby
...
the pictured was printed with lulzbot natural pla at 205c on pei bed at 60c, at 60mm/s and 0.2 layer height with a 0.5mm nozzle.
thingiverse
free
TAZ5 y_bearing_mount_v2.6.mod.STL by ARC7217
...verse
i kept having the y axis idler bearing mount crack, so this is an attempt to beef up the weak point on the bearing holder.
thingiverse
free
E3D V6 Adapter Plate for TaZ5 by iporty
.... the extra channels were to reduce weight. i made my version out of aluminum, but i think a 3d printed one would work well also.
thingiverse
free
Lulzbot TAZ5 to Mini adapter by wrvn97
...rse
simply install this adapter on your taz, then install the mini toolhead. easy as that (though it may take some calibration)!
thingiverse
free
Left Fan hidden mount for taz5 by MorganCoLLC
...an hidden mount for taz5 by morgancollc
thingiverse
the bolt can be tightened by placing the allen wrench threw the air out port
thingiverse
free
TAZ5 Hot End Duct for 25 mm Fan by mtgansler
...5 hot end duct for 25 mm fan by mtgansler
thingiverse
shortened it a bit for easier installation and potentially better airflow.
thingiverse
free
Lulzbot TAZ5 7 SD Card Holder by Springloadedexploded
... by springloadedexploded
thingiverse
this is a 7 card holder for a lulzbot taz 5 printer, though i think it will also fit the 4.
Encoder
thingiverse
free
Encoder knob
...encoder knob
thingiverse
for encoder without thread, as in the photo
thingiverse
free
Encoder wheel by kaspwip
...encoder wheel by kaspwip
thingiverse
wheel for encoder
thingiverse
free
Encoder Wheel by mmsparky
...is the model for the encoder wheel. push fit onto bourns encoder with 6mm flat shaft. encoder type e.g. bourns pec11r-4215f-s0024
thingiverse
free
Encoders by SciJoy
...m structure.
we'd love to see what you do with these encoders. you can send us messages on twitter or tumblr.
keep exploring.
thingiverse
free
Wheel encoder spacer
...raises the height of the encoder by 1mm. useful if the encoder you want doesn't come in the height you need for your project.
thingiverse
free
Encoder KNOB by dgTECH3D
...encoder knob by dgtech3d
thingiverse
knob for rotary encoder 6mm diameter
thingiverse
free
Customizablee Encoder by makeitBana
...customizablee encoder by makeitbana
thingiverse
customizable encoder for barrier style optical sensors
thingiverse
free
Encoder handle by McDoS
...encoder handle by mcdos
thingiverse
incremental rotary encoder handlre for 20mm engine
thingiverse
free
Encoder Wheel by afguru
...ngiverse
this is an encoder wheel i designed on alibre. a simple encoder wheel would not cut it so i designed a more robust one.
thingiverse
free
Rotary Encoder Cap by willyckh
...rotary encoder cap by willyckh
thingiverse
a simple cap for the common encoder switch, or as known as rotary encoder. :)
Stepper
thingiverse
free
stepper motor
...stepper motor
thingiverse
this is experimental.
a nearly fully 3d printed stepper motor.
thingiverse
free
stepper bracket by Brennenenenenen
...stepper bracket by brennenenenenen
thingiverse
stepper motor bracket thats holds the stepper at a 90 degree angle
thingiverse
free
Stepper Attachment by googlebleh
...stepper attachment by googlebleh
thingiverse
for a 5mm stepper
thingiverse
free
Mount stepper by Salin
...mount stepper by salin
thingiverse
stepper 42mm
thingiverse
free
STEPPER PICCOLO by SergioPapagni
...stepper piccolo by sergiopapagni
thingiverse
stepper piccolo
thingiverse
free
Stepper Motor Piece
...stepper motor piece
thingiverse
this is for a stepper motor
thingiverse
free
stepper by DogmaGab
...stepper by dogmagab
thingiverse
a
thingiverse
free
Stepper Motor by kevin02
...stepper motor by kevin02
thingiverse
a model of a stepper motor
thingiverse
free
Stepper Cooler by utilitybee
... a 40mm fan and zip tie to stepper.
brought my stepper temps from 80c to 40c
was made to work on the smaller nema 17 steppers
thingiverse
free
Stepper motor by umbertocilia
...stepper motor by umbertocilia
thingiverse
stepper motor from harddrive
6
thingiverse
free
Yellow Ring (6 of 6)
...yellow ring (6 of 6)
thingiverse
last one! please like and collect!
thingiverse
free
NO PHONE v.6/6+ by habib010
... v.6/6+ by habib010
thingiverse
new model based of the iphone 6 & 6+
thin is a prop of the "no phone" series vol.1
thingiverse
free
Gear Bearing 6 in 6 by suvakov
...gear bearing 6 in 6 by suvakov
thingiverse
pla / 0.2mm / infill 10% / no support
thingiverse
free
iPhone 6 / 6 plus screw tray by Anzymanz
...iphone 6 / 6 plus screw tray by anzymanz
thingiverse
iphone 6 / 6 plus screw tray
thingiverse
free
Werkzeugleiste 6 / Toolbar 6 by CBiker
...werkzeugleiste 6 / toolbar 6 by cbiker
thingiverse
werkzeughalter fuer verschiedene werkzeuge mit magnethalter.
thingiverse
free
iPhone 6 and 6 Plus by mattbeechan
...ngiverse.com/jerware) suggested dimensions.
6 plus in two pieces for small print beds. http://www.thingiverse.com/thing:458659
thingiverse
free
Numero 6 by Xbertus
...numero 6 by xbertus
thingiverse
numero 6
thingiverse
free
Iphone 6+ by nitsua8
...iphone 6+ by nitsua8
thingiverse
iphone 6+
thingiverse
free
dress2-6 by paulchancan
...dress2-6 by paulchancan
thingiverse
dress2-6
thingiverse
free
Bird-6- by Centaur
...bird-6- by centaur
thingiverse
bird-6-