Thingiverse
Taz5-6 Stepper Encoder
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a quadrature encoder that can be mounted on the spare hole of the TAZ5-6 extruder stepper. Stick on the pattern and mount with one 3mm screw.
This is for my filament length creation but may be of use for other applications. I stick a encoder pattern to the stepper drive gear of my Taz5 and mount to OPN761N opto's to create a quadrature encoder. It gives 24 steps per revolution. The sensors run at 5 volts but the open collector outputs drive a 3v3 volt micro with the pullups on. The pattern is based on 30 degree segments. The encoder's opto's are set 60 degrees apart plus 15 degrees so the encoder transitions are at different times. This seemed to be the most reliable using the relatively broad beam of the opto's used.
The eagle files are included. Print the encoder pattern from the pdf file. I used double sided tape to attach the pattern to the bottom of the gear. Stick the white leader on first and then wrap it around.
The board is available through Oshpark.com
Cheer
KIsssys
This is for my filament length creation but may be of use for other applications. I stick a encoder pattern to the stepper drive gear of my Taz5 and mount to OPN761N opto's to create a quadrature encoder. It gives 24 steps per revolution. The sensors run at 5 volts but the open collector outputs drive a 3v3 volt micro with the pullups on. The pattern is based on 30 degree segments. The encoder's opto's are set 60 degrees apart plus 15 degrees so the encoder transitions are at different times. This seemed to be the most reliable using the relatively broad beam of the opto's used.
The eagle files are included. Print the encoder pattern from the pdf file. I used double sided tape to attach the pattern to the bottom of the gear. Stick the white leader on first and then wrap it around.
The board is available through Oshpark.com
Cheer
KIsssys
Similar models
thingiverse
free
28byj-48 Stepper mount and Gear Wheel Mount for TOM Tri Track Robot by madmike8
...el to mount the servo drive gear to.
made a couple updates.
added scad file for gear wheel.
added scad file for stepper mount.
grabcad
free
Harmonic drive Telescope Mount
... uses nema 23 stepper motors with encoders.
a variety of gear reductions can be attained depending on the harmonic drive section.
thingiverse
free
opto encoder mount by mattvenn
...opto encoder mount by mattvenn
thingiverse
a parametric, laser cut opto encoder disk and mount.
thingiverse
free
ELS Project Brackets by Gadjet0
... and printed an adapter to fit it to the shaft of the encoder.
please make sure these parts fit your parts before you print them!
thingiverse
free
Gear Motor Drive Mount
...ut the ring of the wheel guards and mount this with 6 screws. after tjat i can install my gear motor drive.
i used m4x20 screws.
thingiverse
free
ESCAP 16mm gearmotor bracket by jbeale
...is probably the combination of two separate quadrature detectors, not quite 45 degrees apart. openscad file provided for bracket.
grabcad
free
US Digital E4P encoder
...us digital e4p encoder
grabcad
360 deg, quadrature shaft encoder
thingiverse
free
3d Printer Filament Length Readout
... this, maybe just an idea to do something simular would be good.
ps here is a link to my 5v to 3v3 volt converter
cheers
kisssys
thingiverse
free
BIQ Stepper D cutting tool by Takeaway3DTech
...d shaft on stepper motors for extruder drive gears belt drive gears. here is the biq tool i made to cut, file, grind my d shafts.
thingiverse
free
Geared Extruder by terenceang
...re torque instead of forking out another $40 for a geared stepper.
used the original drive drive gear and some parts from my bin.
Taz5
thingiverse
free
Lulzbot Taz5 Enclosure by drandolph
... access to a laser cutter you can purchase a kit that includes everything except the 3d printed parts at https://printedsolid.com
thingiverse
free
Taz5 BLTouch Mount by zanthor
...ide of your extruder to anchor this. i ran the bolt through the original nut and then captured the bltouch mount with a 2nd nut.
thingiverse
free
TAZ5 Low Friction Spool Holder by uCHobby
...
the pictured was printed with lulzbot natural pla at 205c on pei bed at 60c, at 60mm/s and 0.2 layer height with a 0.5mm nozzle.
thingiverse
free
TAZ5 y_bearing_mount_v2.6.mod.STL by ARC7217
...verse
i kept having the y axis idler bearing mount crack, so this is an attempt to beef up the weak point on the bearing holder.
thingiverse
free
E3D V6 Adapter Plate for TaZ5 by iporty
.... the extra channels were to reduce weight. i made my version out of aluminum, but i think a 3d printed one would work well also.
thingiverse
free
Lulzbot TAZ5 to Mini adapter by wrvn97
...rse
simply install this adapter on your taz, then install the mini toolhead. easy as that (though it may take some calibration)!
thingiverse
free
Left Fan hidden mount for taz5 by MorganCoLLC
...an hidden mount for taz5 by morgancollc
thingiverse
the bolt can be tightened by placing the allen wrench threw the air out port
thingiverse
free
TAZ5 Hot End Duct for 25 mm Fan by mtgansler
...5 hot end duct for 25 mm fan by mtgansler
thingiverse
shortened it a bit for easier installation and potentially better airflow.
thingiverse
free
Lulzbot TAZ5 7 SD Card Holder by Springloadedexploded
... by springloadedexploded
thingiverse
this is a 7 card holder for a lulzbot taz 5 printer, though i think it will also fit the 4.
Encoder
3ddd
free
Zippo
...ысокополигональная модель культовой зажигалки zippo. выполнена 1:1 по реальному образцу до винтика. бе
3ddd
free
SMANIA Chic DeLuxe
...оригинальной картинки. 2 файла, со слитым и не слитым стэком. юзайте!xml version='1.0' encoding='%soup-encoding%'
thingiverse
free
Encoder knob
...encoder knob
thingiverse
for encoder without thread, as in the photo
3dfindit
free
Encoders
...encoders
3dfind.it
catalog: abb low voltage & systems
thingiverse
free
Encoder wheel by kaspwip
...encoder wheel by kaspwip
thingiverse
wheel for encoder
thingiverse
free
Encoder Wheel by mmsparky
...is the model for the encoder wheel. push fit onto bourns encoder with 6mm flat shaft. encoder type e.g. bourns pec11r-4215f-s0024
thingiverse
free
Encoders by SciJoy
...m structure.
we'd love to see what you do with these encoders. you can send us messages on twitter or tumblr.
keep exploring.
thingiverse
free
Wheel encoder spacer
...raises the height of the encoder by 1mm. useful if the encoder you want doesn't come in the height you need for your project.
thingiverse
free
Encoder KNOB by dgTECH3D
...encoder knob by dgtech3d
thingiverse
knob for rotary encoder 6mm diameter
thingiverse
free
Customizablee Encoder by makeitBana
...customizablee encoder by makeitbana
thingiverse
customizable encoder for barrier style optical sensors
Stepper
turbosquid
$85
Stepper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$22
Mini Stepper
...gymnastic indoor legs machine mini silver sport stepper trainer workout
3d model of silver and black mini stepper with a counter.
turbosquid
$3
stepper deluxe
...osquid
royalty free 3d model stepper deluxe for download as on turbosquid: 3d models for games, architecture, videos. (1284335)
turbosquid
$49
Stepper Motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Fitness Stepper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
stepper motor driver
...stepper motor driver for download as , fbx, dae, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1688860)
turbosquid
$1
Stepper motor driver
... model stepper motor driver for download as obj, stl, and ige on turbosquid: 3d models for games, architecture, videos. (1577811)
3d_export
$5
Stepper motor Nema17 17HS4401
...stepper motor nema17 17hs4401
3dexport
turbosquid
$1
Nema 17 Stepper motor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Nema 17 Stepper Motor 59Nm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
6
3d_export
$18
tulip 6
...tulip 6
3dexport
tulip 6
3d_export
$5
hinge 6
...hinge 6
3dexport
hinge 6
3ddd
$1
MASIERO / FLASHWOOD STL 6 + 6
...6
3ddd
masiero
торшер flashwood stl 6 + 6 фабрики masiero
http://www.masierogroup.com/c87_697/it/flashwood%20stl%206%20+%206.ashx
turbosquid
$110
Atmos Cannon 2000 6*6
...yalty free 3d model atmos cannon 2000 6*6 for download as skp on turbosquid: 3d models for games, architecture, videos. (1528591)
turbosquid
$1
ae 6 6 electric locomotive
... free 3d model ae 6 6 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707537)
turbosquid
$39
A-6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
6 ковров
...6 ковров
3ddd
ковры , ковер
6 ковров
turbosquid
$12
Calligraphic Digit 6 Number 6
...hic digit 6 number 6 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389336)
turbosquid
$19
Case For Phone 6 Girl 6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
Iphone 6 & 6 Plus All
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.