Taz Digital Indicator Mount (Horizontal) by Wolfie

Last crawled date: 3 years, 1 month ago

This is a derivative of https://www.thingiverse.com/thing:551366 Tried to make it a remix but kept getting errors on the upload page.
This is for Digital Indicators that have a vertical screw mount in the rear (see gallery photos). I made it for use with my Digital Headspace gauge for reloading (Innovative Technologies).
The jig is a fixture to mount in the bracket that comes on the Headspace gauge. Unless you have that specific instrument, you don't need it. If you do, print it out and glue in a 9mm bullet (I used a Berry's 115G LRN). The copper jacketed bullet allows for very free gliding across the build plate and also adds weight so it tracks well. Again, unles you have this specific instrument, you don't need it. You will have to make something for the end of the indicator you buy.
The bracket is braced at each end so it should be very stiff and won't allow for flex due to the weight of the instrument and probe.
Should fit Taz 4 and 5 (I have a Taz 5).