Thingiverse
Tarango FPV controller by Dropoff510
by Thingiverse
Last crawled date: 3 years ago
Update: I just added the stl for a stand for the tarango
Hi finally i'm sharing the stl files for my custom controller case i designed. I called it the Tarango because it is a Taranis Qx7 mixed inspired by a tbs tango controller, Tara Ango.
I wanted a controller that was reasonably compact, and yet has a screen i can fly from, diversity receiver with patch and omni antenna for 5.8 video, crossfire tx integration. and dvr record and playback ability. and i still have the FrSky 2.4 tx still fit inside also. and it has a 6000 mah 2s liion to power it.
after much work i got it all to fit.
So first off this is no simple build it requires quite a bit of work to get all the goodies to fit!
Here is a video showing the Tarango. Well the first one I made was red.https://youtu.be/qC90SLfm9T4
You will have to remove some connectors from the taranis main board for the 18650 cells to fit. and will also have to remove the sma connectors on the furious fpv receiver. also the lcd from the video receiver will also need to be removed and remote mounted with 4 wires to the front. and the tbs tango jr module will need to be taken apart so it can connect directly to the taranis main connector. thats just what i can think of now. i would like to do a video on the process but well see how that goes.
Anyways if you do end up building one please post a picture of it with the #TarangoFPV on Instagram, so i can see them in the wild lol. Thanks and please don't be shy about contributing some $ if you want to show your appreciation for all the work that has gone into designing this. oh and don't forget to have fun, take your time. :)
Parts list
it has a 5" lcd screen https://www.amazon.com/gp/product/B01K1U7LU0/ref=od_aui_detailpages00?ie=UTF8&psc=1
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202186351028
furious Fpv True D diversity receiver 5.8 v3.6. it can use any version as long as it has the 3 buttons not the click wheel.https://www.getfpv.com/furious-true-d-diversity-receiver-module-5-8ghz-system-v3-firmware.html
the main radio is a Taranis Qx7 https://www.getfpv.com/frsky-taranis-q-x7-2-4ghz-16ch-transmitter-black.html
with m7 gimbals. https://www.getfpv.com/frsky-m7-hall-sensor-gimbal-for-frsky-taranis-q-x7.html
also has a Tbs crossfire the fullsize module.https://www.getfpv.com/tbs-crossfire-tx-long-range-r-c-link.html
4 18650 liion cells wired for 2s 6000mah.https://www.getfpv.com/samsung-30q-18650-3000mah-15a-battery.html
the dvr is from amazon or ebay.https://www.amazon.com/Crazepony-Eachine-ProDVR-Recorder-Quadcopter/dp/B01HGAWWDE/ref=sr_1_4?s=electronics&ie=UTF8&qid=1518660278&sr=1-4&keywords=fpv+dvr
the video and power switch https://www.amazon.com/gp/product/B008DFYHV2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Axii antenna https://www.getfpv.com/lumenier-axii-mmcx-5-8ghz-antenna-rhcp.html
Patch antenna https://www.getfpv.com/team-blacksheep-5g8-patch-5dbi.html
Mmcx connectors https://www.ebay.com/itm/5Pcs-Female-MMCX-Socket-Headset-Wire-Repair-for-Shure-SE215-SE315-SE425/292298777965?hash=item440e5d656d:g:X9MAAOSwIINZxLZo
hi i just added a neck strap version. the mount for neck strap should be made out of 1/16 steel plate if possible. pla is strong but i don't trust it to hold the radio. so i provided the stl to print it out as a template for the metal one.
Also there is a new top cover version with the slot for the neck strap.
and here is a new video with a little more detail on the build. https://youtu.be/37x64CtPgAU
Hi finally i'm sharing the stl files for my custom controller case i designed. I called it the Tarango because it is a Taranis Qx7 mixed inspired by a tbs tango controller, Tara Ango.
I wanted a controller that was reasonably compact, and yet has a screen i can fly from, diversity receiver with patch and omni antenna for 5.8 video, crossfire tx integration. and dvr record and playback ability. and i still have the FrSky 2.4 tx still fit inside also. and it has a 6000 mah 2s liion to power it.
after much work i got it all to fit.
So first off this is no simple build it requires quite a bit of work to get all the goodies to fit!
Here is a video showing the Tarango. Well the first one I made was red.https://youtu.be/qC90SLfm9T4
You will have to remove some connectors from the taranis main board for the 18650 cells to fit. and will also have to remove the sma connectors on the furious fpv receiver. also the lcd from the video receiver will also need to be removed and remote mounted with 4 wires to the front. and the tbs tango jr module will need to be taken apart so it can connect directly to the taranis main connector. thats just what i can think of now. i would like to do a video on the process but well see how that goes.
Anyways if you do end up building one please post a picture of it with the #TarangoFPV on Instagram, so i can see them in the wild lol. Thanks and please don't be shy about contributing some $ if you want to show your appreciation for all the work that has gone into designing this. oh and don't forget to have fun, take your time. :)
Parts list
it has a 5" lcd screen https://www.amazon.com/gp/product/B01K1U7LU0/ref=od_aui_detailpages00?ie=UTF8&psc=1
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202186351028
furious Fpv True D diversity receiver 5.8 v3.6. it can use any version as long as it has the 3 buttons not the click wheel.https://www.getfpv.com/furious-true-d-diversity-receiver-module-5-8ghz-system-v3-firmware.html
the main radio is a Taranis Qx7 https://www.getfpv.com/frsky-taranis-q-x7-2-4ghz-16ch-transmitter-black.html
with m7 gimbals. https://www.getfpv.com/frsky-m7-hall-sensor-gimbal-for-frsky-taranis-q-x7.html
also has a Tbs crossfire the fullsize module.https://www.getfpv.com/tbs-crossfire-tx-long-range-r-c-link.html
4 18650 liion cells wired for 2s 6000mah.https://www.getfpv.com/samsung-30q-18650-3000mah-15a-battery.html
the dvr is from amazon or ebay.https://www.amazon.com/Crazepony-Eachine-ProDVR-Recorder-Quadcopter/dp/B01HGAWWDE/ref=sr_1_4?s=electronics&ie=UTF8&qid=1518660278&sr=1-4&keywords=fpv+dvr
the video and power switch https://www.amazon.com/gp/product/B008DFYHV2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Axii antenna https://www.getfpv.com/lumenier-axii-mmcx-5-8ghz-antenna-rhcp.html
Patch antenna https://www.getfpv.com/team-blacksheep-5g8-patch-5dbi.html
Mmcx connectors https://www.ebay.com/itm/5Pcs-Female-MMCX-Socket-Headset-Wire-Repair-for-Shure-SE215-SE315-SE425/292298777965?hash=item440e5d656d:g:X9MAAOSwIINZxLZo
hi i just added a neck strap version. the mount for neck strap should be made out of 1/16 steel plate if possible. pla is strong but i don't trust it to hold the radio. so i provided the stl to print it out as a template for the metal one.
Also there is a new top cover version with the slot for the neck strap.
and here is a new video with a little more detail on the build. https://youtu.be/37x64CtPgAU
Similar models
thingiverse
free
Frsky taranis qx7 18650 battery holder by Some87
...frsky taranis qx7 18650 battery holder by some87
thingiverse
18650 battery holder made to fit inside a frsky taranis qx7
thingiverse
free
TBS Crossfire Diversity RX holster for Armattan FPV Rev2 by ohhorob
...v2 quadcopter.
it has a small up-tilt to give the antennae clearance, while still protecting the row of connectors at the bottom.
thingiverse
free
Taranis Antenna Guard Crossfire by babar121
...n. print with flat side down, and supports. slip onto transmitter antenna with antenna in vertical position or horizontal. cheers
cults
free
Adapter Receiver For Furious FPV-0121-S FRSKY + Buzzer 9mm
...larm-beeper-with-cable-for-eachine-qx70-qx90-qx95-naze32-f3-diy-micro-brushed-fpv-racer-p-1100338.html ? p = ld020411878172015024
thingiverse
free
TBS Source One BN880 + VTX + FrSky antenna holder by aigilea
...gps+compass module, (rp-)sma connector with or without flange and two whip antenna tubes for diversity receiver like frsky r-xsr.
thingiverse
free
Frsky Taranis QX7 Pirate Knob
...frsky taranis qx7 pirate knob
thingiverse
custom knob for frsky taranis qx7 / qx7s.
thingiverse
free
FrSky QX7 - LipoMod - 3S by fpv-couple
...y-pack.html
the only thing to do is to change one of the power output connectors to the qx7 connector style (2s jst-xh connector)
cults
free
Furious Mini RX FRSKY Adapter Receiver + Buzzer 9mm
...larm-beeper-with-cable-for-eachine-qx70-qx90-qx95-naze32-f3-diy-micro-brushed-fpv-racer-p-1100338.html ? p = ld020411878172015024
grabcad
free
TBS crossfire diversity receiver
...tbs crossfire diversity receiver
grabcad
the tbs crossfire reciever
thingiverse
free
Virhuck or GTeng T909 FPV Watch FrSky Taranis QX7 Mount by TDW
...hen it's attached. it just slips over the antenna and it held in place by the antenna. it clears a neck strap if you use one.
Dropoff510
thingiverse
free
Dual ISDT Q6 Charger case by Dropoff510
...nt mounts.
hi i also added stl files for the top and bottom that are split in half so it can be printed on a smaller bed printer.
thingiverse
free
FRango (Tarango Remix)
...files have been verified for correctness. big thanks to dropoff510 for sharing the stp files. i really like the...
Tarango
thingiverse
free
FRango (Tarango Remix)
...tton, dvr button, trim switch caps, and other tarango related parts can be found here: https://www.thingiverse.com/thing:4166640
thingiverse
free
Tarango - Taranis X9d plus *2015 edition*
... back will be the only part modified to house 18650s, power in and video switch and power. i'll include the parts list later.
3dwarehouse
free
Tarango 02
...tarango 02
3dwarehouse
rev. 01
3dwarehouse
free
casa familia Dominguez
...casa familia dominguez 3dwarehouse calle tarango esquina con calle duna colonia las águilas c.p.01710 delegación...
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
Controller
3d_ocean
$4
Controller TQFP32
...qfp32
3docean
chip controller cpu electronic gpu mcu micro controller silicon smd tqfp wafer
a micro controller in tqfp32 package
3d_ocean
$4
Controller TQFP44
...44
3docean
chip controller cpu electronic gpu mcu micro controller package smd tqfp tqfp44
a micro controller in a tqfp44 package
3d_export
$15
control unit
...control unit
3dexport
control unit
3ddd
$1
Yacht control
...yacht control
3ddd
yacht control
3d_export
$5
controle pgdm
...controle pgdm
3dexport
carcaca controle pgdm
turbosquid
free
controler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Control
...
http://www.schmitz-leuchten.de/html-ru/einzelleuchten-lampentyp-details.php?lamptype_no=700&group;=917&id;=731
3d_ocean
$4
Controller TQFP100
...100
3docean
chip computer cpu electronic gpu mcu micro controller pin platine silicon wafer
a micro controller in tqfp100 package
3d_ocean
$4
Controller TQFP64
...qfp64
3docean
chip computer cpu gpu mcu micro controller package silicon tqfp tqfp64 wafer
a micro controller in a tqfp64 package
3d_ocean
$7
Remote controller
... control switcher tv remote
remote controller for tv, sound systems etc easy to edit textures photo real rendered with mental ray