Thingiverse
Tap Wrench by bassamanator
by Thingiverse
Last crawled date: 2 years, 11 months ago
Works perfectly with 3d prints. Haven't tested on anything else. Fits taps from M3 to M8. Larger sizes will probably work though likely not smaller ones.
Parts required:
-1 x M5 x 20 mm
-1 x allen key/screwdriver
For the body, I printed the prototypes at 20% infill, 4 walls/tops/bottoms and they were unbreakable. The final version that I will be keeping was printed at 100% infill; it was only a couple of grams heavier and took 10 minutes longer to print. Takes about 55 minutes to print at 50mm/s. No supports. The hole is threaded but it might be a hard to screw in the bolt the first time.
For the pinch block, print it at 100% infill pointing up (like in the picture) with no supports. Print a few of them because they will eventually wear out I imagine.
Please post a make if you found this print useful. Thanks!
Parts required:
-1 x M5 x 20 mm
-1 x allen key/screwdriver
For the body, I printed the prototypes at 20% infill, 4 walls/tops/bottoms and they were unbreakable. The final version that I will be keeping was printed at 100% infill; it was only a couple of grams heavier and took 10 minutes longer to print. Takes about 55 minutes to print at 50mm/s. No supports. The hole is threaded but it might be a hard to screw in the bolt the first time.
For the pinch block, print it at 100% infill pointing up (like in the picture) with no supports. Print a few of them because they will eventually wear out I imagine.
Please post a make if you found this print useful. Thanks!
Similar models
thingiverse
free
Shelf Peg - 4mm diameter by risingpowers
...made this shelf peg because i was missing one. works like a charm! print sideways with supports/100% infill. ready in 30 minutes!
thingiverse
free
Shelf support peg
...m in my kitchen! let me know how you are getting on!
no support needed, print time approx. 18 minutes with 0.2mm and 100 % infill
thingiverse
free
Uniden UBC125XLT BigFoot by Dowabadoo
...
no supports, i used 3 perimiters and a 100% infill for the top clippy part in prusa slicer.
included gcode is for a prusa i3mk3s
thingiverse
free
Small Audio Cones by cbachalo
...s for audio gear
3.5cm diameter by 3.5cm tall
1/4-20 threaded insert (needs some cleaning with 1/4-20 tap)
print with 100% infill
thingiverse
free
Nintendo Switch Tower
...rsion :
glue
mounting
look at pictures.
for screw version, bodybottom_screw and bodymiddle_screw are fixed with 6 x m3x40mm shcs.
thingiverse
free
Intercooler Kit extension for the EJ20 Subaru Engine
... and intercooleroutclamp2
mounting
look at pictures.
intercoolerstipaintmask is used to paint the sti logo with an airbrush.
thingiverse
free
Snap-on Clip by AntonioX25
...inted it with pla, but i'm sure it will work with any other type of solid filament like abs.
will require force to snap it in
thingiverse
free
Katana by Luca3Ds
...... used fusion 360...
i printed it:
-100% infill
-0.2 resolution
-support everywhere
just use settings that work the best for u!
thingiverse
free
HTC vive Wall Mount v2 Working by omeryavuz
...use holder if you want make it 100
%100 infill for other parts
follow and enjoy with version 2
i like coffe when i am working. :)
thingiverse
free
Sena Prism 90 degree angle mount by TaNoX80
...0
thingiverse
i printed it at 0.24 layer height 100% infil as it is a small part takes about 30 minutes to make. i used supports
Bassamanator
thingiverse
free
Orgainizer with 6 compartments. by bassamanator
...by bassamanator
thingiverse
i just needed a simple organizer so i removed the handle and the 2 small sides that were protruding.
thingiverse
free
Anycubic Mega/S Hotbed Corner Cable Holder by bassamanator
...er cable holder by bassamanator
thingiverse
this remix has an 8.5 mm hole to accommodate an 8 mm od spring.
print with supports.
thingiverse
free
V5 to V6 Hotend Spacer by bassamanator
... at the top now.
remixed from https://www.thingiverse.com/thing:3794347. original model https://www.thingiverse.com/thing:2539301
thingiverse
free
Anybic Mega/S Z Limit Adjust Screw Buffer by bassamanator
...ut all the credit goes to the original designer.
try the original first and if it doesn't work for you, you can try this one.
thingiverse
free
Clip for Anycubic-i3-MEGA/S-top-bracket-for-TUSH by bassamanator
... the holder to the frame.
slim and wide versions available.
if you found these parts useful, please like and post a make. thanks!
thingiverse
free
Anycubic Mega S Simple Hotend Shroud by bassamanator
...r https://www.thingiverse.com/thing:3605183
update: added a simplified version that consists only of the left side of the shroud.
thingiverse
free
Anycubic Mega/S Motherboard Fan Mount 9015 by bassamanator
...he board and the fan can be removed/installed independently.
what fan am i using?
i'm using a 9015 fan bought from aliexpress
thingiverse
free
Anycubic Mega S Top Mount Spool Filament Guide by bassamanator
...e attachment-v2.stl into top-beam-mount-1sided-alt-v2b.stl.
if you found these parts useful, please like and post a make. thanks!
thingiverse
free
Anycubic Mega/S General Mounting System by bassamanator
...e a comment and i'll see if i can do something to help.
if you found these parts useful, please like and post a make. thanks!
Wrench
3d_export
$5
Wrench
...wrench
3dexport
rusty wrench
3d_export
$15
wrench
...wrench
3dexport
solidworks model of a wrench tool
3d_export
$10
wrench
...wrench
3dexport
solidworks model of a wrench tool
3d_export
$5
wrench
...wrench
3dexport
low/highpoly model of wrench
archibase_planet
free
Wrench
...wrench
archibase planet
spanner wrench
wrench n01110 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Wrench
...wrench
archibase planet
spanner wrench
wrench n191110 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$7
Adjustable Wrench
...adjustable wrench
3docean
adjustable wrench highly detailed wrench
highly detailed adjustable wrench.
3d_ocean
$6
Wrenches
...-end wrench: polys-1074, verts-1076 without interations. rozhkovo-spanner wrench: polys-996, verts-996 without interations. sp...
turbosquid
$2
Wrench
...
turbosquid
royalty free 3d model wrench for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298587)
turbosquid
$1
wrench
...
turbosquid
royalty free 3d model wrench for download as fbx on turbosquid: 3d models for games, architecture, videos. (1148635)
Tap
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap b1195 - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap b1109 - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
beer tap bar equipment
beer-tap - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
faucet stop-cock tap
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
faucet tap stop-cock
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
stop-cock tap faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
stop-cock tap faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.