Thingiverse
Tamiya 1/14 King Hauler Semi Truck by caj
by Thingiverse
Last crawled date: 3 years, 1 month ago
1/19/20 the new Tamiya King Hauler V2 is uploaded and ready to download i am leaving this one it spring suspension and does does work realy well if you print the frame at 100% infill but if you are building from scratch you should check out and download the new version it is completely Tamiya build and 10000% betterhttps://www.thingiverse.com/thing:4109447
9/8/19 update i have finally got the tool box switch box finished and uploaded decided to run the truck in the hall and nead to switch off sound when you hear doors slamming that is a indicator that i nead to shut the sound off before all your neighbors take your truck and throw it out the window
8/2/19 uploaded new motor mount to clear steering linkage the 12v motor interferes with the steering linkage this also increases the speed and torque of the motor by putting it inline with the drive shaft just a little bit but it is noticeable
8/2/19 update note i have noticed if you use a 6v motor to use a 12v battery if using a 12v motor use a 24v battery you will still be in the ratings for these motors as the 6v range is from 6-12 and the 12v motor is rated at 12 to 20v this gives this truck the pulling power it needs to pull a trailer other wise it does run but just not up to my specs most ESC are rated up to 20 volts you might have to purchase a 24v ESC for 24v battery but i believe that 4 volts should not over volt a 20v ESC or damage it if anything it might just see the over volt and just shut down with no damage i might be wrong try at your own risk brushed ESC's are cheep to replace ????
9/30/19 uploaded motor mount for 540 motor/motor u-joint for 540 motor and battery box for Zeee 7200mAh 80C 3S 11.1V Hard case Lipo Battery according to the specs it should fit the original holder but you will not be able to lock it down
3/13/19 i have made some more frame adjustments and have adapted this truck for the GT Power sound and voice controller
i have discovered that the #5 5/8" screws for plastic that i purchased are the last on this planet this makes no sense to me as everything you purchase uses #5 screws for plastic but you just can not buy them anyplace #4 5/8" acording to specs are the same 3mm dia and should work and are available also #5 1/2" wood screws are pretty much available and shoud work as well
hear is the only place on this planet to purchase any size screws for plastic
Screwerkhttps://us.screwerk.com/en/shop/grid/stp.html?L=10.00&d1=3.0&drive=H&gclid=EAIaIQobChMIk9--sPr74AIVciCtBh1RDgsUEAAYASAAEgIrjfD_BwE&head=B&material=S
so i now have 2 versions of the frame screws for plastic and nuts and bolts
one note that i have to mention and this is quite important this is the most complex thing you will ever download on thingyverse with 2 printers going 24hrs for 7days of printing time and i mean 24hr days no break time so this is going to be a torture test of you and your printer and expect to use about 3 full rolles of filament so if there is anything ready to go on your printer this project will break it guaranteed
update i have finaly recieved the bearings after 3 orders and 2 wrong parts sent
so i have decided to repair the axle bearing holes so these bearings can be used if so desired i have not got the new axles compleatly re-printed yet to see the differance but the sleeve bearings that i have included do work pretty good
so you can either print the 50mm shocks and bearings or purchase them i know that some who build this want nothing but the best and will want to purchase
i make all my stuff for the cheep who can not afford to purchase separate parts
i have also decided to put all the electronics in this truck and finish it so i will be making the side step switch box and posting it separately i have ordered the sound box and will be ordering the light kit soon so i can not make the side box till i receive all the electronics so i know the switch placements
i have almost completely remixed MRcrakyface v4 truck to make this thing work every thing is printable all you nead is screws and bolts and electronics
the cab and other parts on this truck are first prints and have ben fixed so your truck will have the proper cab as well as hollow cab light for inserting lights
the springs require click pen springs or 5mm od x 25mm small springs
there are 2 bearings the 6700zz i can now understand what the comment about bearings not fitting in the differentials this is not a calibration issue this is a problem with the designer one axle is correct but the other 2 have a 15mm dia cut this is the size of the bearing but when creating 3d parts to fit you must add 1mm so those should have ben 16mm in the design i could have fixed this but it would be a lot more work than i want to do so i have added bearings to specialty fit these 2 differentials
i have also had to shorten the differentials the where 10mm to wide to match this truck as well as not allowing the shocks to screw directly into the frame
all parts are now put together with screws for plastic these are easier to obtain and cheaper than the metric nuts and bolts you still nead the metric screws to mount the 4 rear rims and the grub screws for the U joints and steering
refer to MRcrankyface video for putting the frame and suspension together this video still applies to this truck
9/8/19 update i have finally got the tool box switch box finished and uploaded decided to run the truck in the hall and nead to switch off sound when you hear doors slamming that is a indicator that i nead to shut the sound off before all your neighbors take your truck and throw it out the window
8/2/19 uploaded new motor mount to clear steering linkage the 12v motor interferes with the steering linkage this also increases the speed and torque of the motor by putting it inline with the drive shaft just a little bit but it is noticeable
8/2/19 update note i have noticed if you use a 6v motor to use a 12v battery if using a 12v motor use a 24v battery you will still be in the ratings for these motors as the 6v range is from 6-12 and the 12v motor is rated at 12 to 20v this gives this truck the pulling power it needs to pull a trailer other wise it does run but just not up to my specs most ESC are rated up to 20 volts you might have to purchase a 24v ESC for 24v battery but i believe that 4 volts should not over volt a 20v ESC or damage it if anything it might just see the over volt and just shut down with no damage i might be wrong try at your own risk brushed ESC's are cheep to replace ????
9/30/19 uploaded motor mount for 540 motor/motor u-joint for 540 motor and battery box for Zeee 7200mAh 80C 3S 11.1V Hard case Lipo Battery according to the specs it should fit the original holder but you will not be able to lock it down
3/13/19 i have made some more frame adjustments and have adapted this truck for the GT Power sound and voice controller
i have discovered that the #5 5/8" screws for plastic that i purchased are the last on this planet this makes no sense to me as everything you purchase uses #5 screws for plastic but you just can not buy them anyplace #4 5/8" acording to specs are the same 3mm dia and should work and are available also #5 1/2" wood screws are pretty much available and shoud work as well
hear is the only place on this planet to purchase any size screws for plastic
Screwerkhttps://us.screwerk.com/en/shop/grid/stp.html?L=10.00&d1=3.0&drive=H&gclid=EAIaIQobChMIk9--sPr74AIVciCtBh1RDgsUEAAYASAAEgIrjfD_BwE&head=B&material=S
so i now have 2 versions of the frame screws for plastic and nuts and bolts
one note that i have to mention and this is quite important this is the most complex thing you will ever download on thingyverse with 2 printers going 24hrs for 7days of printing time and i mean 24hr days no break time so this is going to be a torture test of you and your printer and expect to use about 3 full rolles of filament so if there is anything ready to go on your printer this project will break it guaranteed
update i have finaly recieved the bearings after 3 orders and 2 wrong parts sent
so i have decided to repair the axle bearing holes so these bearings can be used if so desired i have not got the new axles compleatly re-printed yet to see the differance but the sleeve bearings that i have included do work pretty good
so you can either print the 50mm shocks and bearings or purchase them i know that some who build this want nothing but the best and will want to purchase
i make all my stuff for the cheep who can not afford to purchase separate parts
i have also decided to put all the electronics in this truck and finish it so i will be making the side step switch box and posting it separately i have ordered the sound box and will be ordering the light kit soon so i can not make the side box till i receive all the electronics so i know the switch placements
i have almost completely remixed MRcrakyface v4 truck to make this thing work every thing is printable all you nead is screws and bolts and electronics
the cab and other parts on this truck are first prints and have ben fixed so your truck will have the proper cab as well as hollow cab light for inserting lights
the springs require click pen springs or 5mm od x 25mm small springs
there are 2 bearings the 6700zz i can now understand what the comment about bearings not fitting in the differentials this is not a calibration issue this is a problem with the designer one axle is correct but the other 2 have a 15mm dia cut this is the size of the bearing but when creating 3d parts to fit you must add 1mm so those should have ben 16mm in the design i could have fixed this but it would be a lot more work than i want to do so i have added bearings to specialty fit these 2 differentials
i have also had to shorten the differentials the where 10mm to wide to match this truck as well as not allowing the shocks to screw directly into the frame
all parts are now put together with screws for plastic these are easier to obtain and cheaper than the metric nuts and bolts you still nead the metric screws to mount the 4 rear rims and the grub screws for the U joints and steering
refer to MRcrankyface video for putting the frame and suspension together this video still applies to this truck
Similar models
cg_trader
$10
Car battery Acid 12v and 24v
...car battery acid 12v and 24v
cg trader
car acid battery for truck and car 12v and 24v
3dwarehouse
free
sp3 rc1 truck with sound
...l so it works a lot better. i used sp3 rc1 to play the sound see if you can find the the script or else email me. #sketchyphysics
thingiverse
free
Volt Meter > Small by mmaner
...w.ebay.com/itm/lcd-indicator-battery-capacity-tester-voltmeter-12v-24v-36-48v-lead-acid-lithium-/281874204243?hash=item41a1030653
3dwarehouse
free
DC Motor 12V 24V
...dc motor 12v 24v
3dwarehouse
a dc motor for wiper. working between 12v and 24v.
thingiverse
free
Reely Core/HBX 12891 differential outdrive cup - rear by szafir51
...ed it with reely core truggy and works fine with 4000kv motor with 3s battery.
should be compatibile with hbx 12891 desert truck.
thingiverse
free
DIY-JET-Wakeboard propulsion unit by DIYJETWAKEBOARD
...a wellendichtring 6x13x... - with this
you will get a thrust of aprox. 40 lbs
if you have an questions don't hesitate to ask
thingiverse
free
Box for lipo batteries for truck 1/14 Tamiya by Gawo
...box for lipo batteries for truck 1/14 tamiya by gawo
thingiverse
box for lipo batteries for truck 1/14 tamiya
thingiverse
free
R/C micro Shock 40mm solution by caj
...ke the english night rider body of the one i own and that is the body i will be making
still waiting on the motor for this truck
thingiverse
free
RC Trucked Vehicle by midogan
...rew
• 24 x m4 nut
• 300mm x 140mm x 5mm sheet metal
arduino uno code: https://github.com/mi-dogan/rctruckedvehiclearduino
thingiverse
free
Greenworks 24v Battery Wall Mount by VariablePenguin
...decided to just mount the battery and then plug in the charger. simple solution! it has 2 holes countersunk for 1/4" screws.
Caj
3dfindit
free
AFT62-CAJ-NA
...aft62-caj-na
3dfind.it
catalog: yiheda
thingiverse
free
MAN Truck by caj
...man truck by caj
thingiverse
included is the designspark mechanical project file
thingiverse
free
magirus transport truck by caj
...magirus transport truck by caj
thingiverse
magirus-transport-pack-
thingiverse
free
The Simpsons 3d Silhouettes by caj
...the simpsons 3d silhouettes by caj
thingiverse
the simpsons 3d silhouettes
thingiverse
free
Aladdin 3D Silhouettes by caj
...aladdin 3d silhouettes by caj
thingiverse
aladdin 3d silhouettes
thingiverse
free
The Croods 3d Silhouettes by caj
...the croods 3d silhouettes by caj
thingiverse
the croods 3d silhouettes
thingiverse
free
Madagascar 3d Silhouettes by caj
...madagascar 3d silhouettes by caj
thingiverse
madagascar 3d silhouettes
thingiverse
free
puppet Gepetto head and hands by caj
...puppet gepetto head and hands by caj
thingiverse
for making a marionette
thingiverse
free
narrower slide quick release by caj
...narrower slide quick release by caj
thingiverse
remixed for this camera gimble
thingiverse
free
Disney 3d Couples silhouettes by caj
...disney 3d couples silhouettes by caj
thingiverse
disney couples silhouettes
Hauler
turbosquid
$15
hauler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$100
GOOSENECK CAR HAULER
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Tardigrade fuel hauler
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$79
Heavy Hauler Truck Rigged
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$130
TRACTOR HAULER LONGEST MOUNTAIN DEW #9 MAX9
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$130
TRACTOR HAULER LONGEST RUNNING YARD #9 MAX9
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
big foot trailer lp
...big foot trailer lp 3dexport bigfoot hauler ...
3d_export
$139
Peterbilt 386 3D Model
...model 3dexport peterbilt 386 387 paccar truck semi trailer hauler heavy lorry vehicle transport industrial tank tanker car tractor...
3d_export
$119
Volvo FH16 2012 3D Model
...3dexport volvo fh series fh16 sweden truck semi trailer hauler heavy lorry vehicle transport industrial tank tanker car tractor...
3d_export
$15
Truck 3D Model
...truck 3d model 3dexport cascadia paccar truck semi trailer hauler heavy lorry vehicle transport industrial tank tanker car tractor...
Tamiya
3d_export
$35
Lets go tamiya cars body 3D Model
...rt
car toy tamiya
lets go tamiya cars body 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl mohd9011 103666 3dexport
3d_export
$69
tamiya avante amd japan cup
...u the full service!<br>oh i'm using v-ray 5, it's really fast and good result. easy controll and i'm satisfied!
3d_export
$23
3D TAMIYA MINI 4WD SONIC MAGNUM AVANTE CAR TOY
...rque gives more acceleration and allows the car to better withstand the difficulties of climbing slopes or running through turns.
thingiverse
free
Stand Tamiya
...stand tamiya
thingiverse
stand pour tamiya, colle 60ml et flacons peinture acrylique 10ml
thingiverse
free
tamiya keyring by sagandbag2012
...tamiya keyring by sagandbag2012
thingiverse
tamiya keyring
thingiverse
free
Horn Tamiya by Gawo
...horn tamiya by gawo
thingiverse
horn tamiya
thingiverse
free
Tamiya NN2 by TITANIUM94010
...tamiya nn2 by titanium94010
thingiverse
tamiya nn2 part for xv01
thingiverse
free
TAMIYA KEYCHAIN by gsorrentino88
...tamiya keychain by gsorrentino88
thingiverse
keychain tamiya plastic models
thingiverse
free
rc tamiya grasshopper by sagandbag2012
...rc tamiya grasshopper by sagandbag2012
thingiverse
tamiya grasshopper is another tamiya car
thingiverse
free
Llavero TAMIYA by Garcinsky
...llavero tamiya by garcinsky
thingiverse
llavero de pared con el logo de tamiya(c).
tamiya's(c) key holder.
Semi
turbosquid
$65
semi
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
Semi 3D Model
...semi 3d model
3dexport
semi
semi 3d model modelix 59728 3dexport
3d_ocean
$19
Semi Truck
...y rim seat semi truck speed truck tyre wheel
detailed 3d model of semi truck. all materials are included. model is ready for use.
design_connected
$10
Semi Lights
...semi lights
designconnected
gubi semi lights computer generated 3d model. designed by bonderup, claus.
3ddd
$1
Gubi Semi Pendant
...gubi semi pendant
3ddd
gubi
gubi semi pendant
turbosquid
$110
Tesla Semi
...bosquid
royalty free 3d model tesla semi for download as obj on turbosquid: 3d models for games, architecture, videos. (1404184)
turbosquid
$99
Tesla Semi
...bosquid
royalty free 3d model tesla semi for download as max on turbosquid: 3d models for games, architecture, videos. (1706688)
turbosquid
free
Semi Truck
...rbosquid
free 3d model semi truck for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1397814)
turbosquid
$400
Semi Truck
...
royalty free 3d model semi truck for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1503399)
turbosquid
$50
SEMI-92
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
King
3ddd
$1
King
...king
3ddd
панель
гипсовая стеновая панель. модель king.
3ddd
$1
KING
...king
3ddd
напольный светильник king
цвет: красный, белый, черный
материал: ткань, стекловолокно
design_connected
$11
King
...king
designconnected
autoban king floor lights computer generated 3d model. designed by seyhan özdemir.
3d_ocean
$5
Kings Sword
...kings sword
3docean
king melee one handed swowd weapon
kings sword.
3d_export
$5
the sword of king ererk the fictional king
...the sword of king ererk the fictional king
3dexport
a simple model of the one-and-a-half sword of king ererk
3d_export
$15
king kong
...king kong
3dexport
king kong
3d_export
$12
chess king
...chess king
3dexport
a chess king
3ddd
$1
cosmo KING
...cosmo king
3ddd
cosmo king
turbosquid
$4
King
...ng
turbosquid
royalty free 3d model king for download as stl on turbosquid: 3d models for games, architecture, videos. (1272597)
3ddd
$1
Кровать KING
...кровать king
3ddd
king
просто кровать
14
3d_export
$15
14
...14
3dexport
3d_export
$5
iphone 14
...iphone 14
3dexport
iphone 14 concept
3ddd
$1
Декор 14
...декор 14
3ddd
декоративный набор
декор 14
turbosquid
$25
14
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Clamp-14
...clamp-14
3dexport
3d model of clamp name 14
3ddd
$1
PLANTS 14
...plants 14
3ddd
цветок , горшок
plants 14.. enjoy
design_connected
$27
Domino 14
...domino 14
designconnected
zanotta domino 14 computer generated 3d model. designed by progetti, emaf.
design_connected
$18
14 Pendant
...14 pendant
designconnected
bocci 14 pendant computer generated 3d model. designed by arbel, omer.
design_connected
$9
Croco 14
...croco 14
designconnected
gervasoni croco 14 computer generated 3d model. designed by navone, paola.
design_connected
$34
Patchwork 14
...patchwork 14
designconnected
ligne roset patchwork 14 computer generated 3d model. designed by mourgue, pascal.
Truck
3d_export
$8
truck
...truck
3dexport
truck
archibase_planet
free
Truck
...truck
archibase planet
truck truck crane car
truck toyota n071013 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Truck
...truck
archibase planet
truck lorry car
truck - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Truck
...truck
archibase planet
truck lorry car
truck n260213 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
truck
...truck
3dexport
3d model of a truck, made for optimus prime!
3d_ocean
$19
Truck
...truck
3docean
four-wheel max truck
precision four-wheel drive truck with mud mask effect, the door can be opened
archibase_planet
free
Truck
...truck
archibase planet
truck car broken car lorry
truck broken - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Truck
...truck
archibase planet
truck lorry autotruck
truck kenworth t600 n280113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Truck
...
archibase planet
truck freightliner lorry car
truck freightliner n200314 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Truck
...truck
archibase planet
truck lorry autotruck
truck 4 eu n160614 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)