Talon Claw V3c / V4c Tactical Mods

Last crawled date: 4 years, 3 months ago

EDIT 4: Added an adjustable version of the buffer stock. It uses a 1/4" 10-32 (standard size from your Captain Slug or Derrik Sun hardware kit) screw to fix the pin to lever, this was meant for added strength. Also uses a 1" 4-40 screw and nut (can probably get away with just two 3/8" 4-40 screws) for retaining the lever to the main body. I used a random extra Nerf spring I had from some random lock, it's approx 6mm diameter x 20mm long.
EDIT3: Added a V3 length hand guard.
EDIT2: Added slide and upper to convert your V3c to V4 without hardware change. Slide works with the HGuard. If you have a V3c (Captain Slug Variant) you will need to print the Butt2Kiri_V4c. The cover photo now shows all files in the set.
EDIT: Updating this thing to include my other mods, which are built around Captain Slug's publicly available V3c 3D (STEP) files.
A tactical handguard for the TalonClaw V4, replaces the original front rail piece. The muzzle piece may require a layer of electrical tape since PLA doesn't crush and provide enough grip to retain a metallic barrel. Note if you have a V3, your rods should be long enough to use this front end.
Added buffertube back butt, which includes a backbutt rod to stabilize spring.
The doublebutt is cosmetic and is 2-pieces to allow sliding down the buffertube. Uses a single 4-40 screw for retention, which will differ from Slug's 10-32 screw and nut.