Swiveling guitar wall hanger (REMIX) by marcoajello

Last crawled date: 3 years, 3 months ago

This is a remix of Sketch's guitar hook with the added feature of allowing the stirrup to swivel to accommodate asymmetrical headstocks etc. I also added a spacer in case you need more distance to the wall so the back of the guitar body doesn't hit against the wall.
Print as oriented in the STL files and with supports everywhere for the stirrup and the base. The stirrup would print a bit more cleanly oriented vertically but given the shearing created by the weight of the guitar the filament has a lot more strength printing it horizontally.
The base has a channel inside the barrel for the stirrup to latch onto so you'll need to remove and/or crush the supports after printing. I found an easy way to do this is just to insert the stirrup and give it a good twist, either crushing or loosening the ring of support.
I printed at 100% to get the sturdiest result but it could be fine at lower infills. But I'd rather be safe than sorry.
Finally, I personally would never hang a precious instrument on anything that was 3D printed, but for something that isn't a priceless heirloom this should do the trick.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/97d9MqJYiju