Surfboard Bath/Pool Toy by Makersome

Last crawled date: 2 years, 12 months ago

Are you tired of buying expensive toys for your bathtub, pool, or collection of things that float. We have you covered here at Makersome. With this easy print item you will be getting nautical in no time. Never worry about losing the Surfboard to the deep 6, cause another copy is just a push of the button away.
Instructions:

Download the STL file for the Surfboard


Pop it into your slicer of choice


We recommend using PLA with extruder setting of 200°C with 20% infill so it floats


If you do not have a Glass Bed Upgrade Kit then we recommend not to use a heated bed, but if you do have the Glass Bed Upgrade Kit then we recommend using a bed temp of 70°C


There is no need to use rafting or supports while printing this project

Load your project onto an SD card or connect your computer to your printer (just use your preferred method here)
Congratulations, you're ready to print!
Check out our 3D Printing Projects page at:http://makersome.com/3d-printing-projects/
Check out our Youtube channel at:https://www.youtube.com/channel/UCv00IAervOUnsipGhwTC9rA
If you like what you see Please Comment and Subscribe.