Thingiverse
![support coulissant pour laser 3dpburner by Picolorigolo](/previews/8804834.jpg)
support coulissant pour laser 3dpburner by Picolorigolo
by Thingiverse
Last crawled date: 3 years, 1 month ago
this is an add-on for the 3dpburner original files. it allows you to set the level of your laser without unscrew the laser. it works with any laser, but it is set fot a 2000mw laser you can find on aliexpress:https://www.aliexpress.com/item/New-arrival-High-Power-12V-2W-2000mW-Focusable-Blue-Laser-Module-445nm-450nm-with-TTL-Wood/32439376930.html?spm=2114.10010108.1000014.5.Lncq9m&scm=1007.13338.46329.0&pvid=433444d2-69b2-4907-b390-25fc758f3628&tpp=1
you will need a:
63 mm axis long and 3mm diameter
1 20x3 mm screw
1 3mm nut
4 12x3 mm screw
optional: 2 screws to block gears on axis
the cable guide part is just insert on the fan.
If you use the X axis switch you will have to compensate it, cause when the laser is in low position, it touch the arm of the X axis preventing the swith to work.
you will need a:
63 mm axis long and 3mm diameter
1 20x3 mm screw
1 3mm nut
4 12x3 mm screw
optional: 2 screws to block gears on axis
the cable guide part is just insert on the fan.
If you use the X axis switch you will have to compensate it, cause when the laser is in low position, it touch the arm of the X axis preventing the swith to work.
Similar models
grabcad
free
![2000MW 450nm Blue Laser Module](/t/1972791.jpg)
2000MW 450nm Blue Laser Module
...ank you!! (link to fan: https://grabcad.com/library/fan-40-x-40-mm-1)
*not the actual fan on the laser module but close enough.
thingiverse
free
![K40 Laser MGH12 Rail on X axis modification with Air Assist](/t/4651719.jpg)
K40 Laser MGH12 Rail on X axis modification with Air Assist
...mgh12 on x axis modification with airassist
you need
1 x mgh12 400mm
2 x m3 enter nut
ca.20 x m3 * 8 screw
1 x m3 screw tap
thingiverse
free
![3dpBurner 40*40 laser mount by lufton](/t/5099444.jpg)
3dpBurner 40*40 laser mount by lufton
...3dpburner 40*40 laser mount by lufton
thingiverse
this is a 40*40mm 3.5w laser module mount designed for 3dpburner project.
thingiverse
free
![3D printed for plotter or laser engraver. by tomil1](/t/8534619.jpg)
3D printed for plotter or laser engraver. by tomil1
...hen you working with laser laser diode is very dangerous for eye ! always wear goggles in an adequate to laser diode wavelength !
grabcad
free
![Rotate Axis for Laser Mini Wifi](/t/13071297.jpg)
Rotate Axis for Laser Mini Wifi
...bcad
rotate axis for laser mini wifi
for laser mini wifi: https://grabcad.com/library/laser-mini-wifi-1
implement on steel 3mm
thingiverse
free
![X-axis Tensioner to avoid forces on Z-axis by SteevyT](/t/8603495.jpg)
X-axis Tensioner to avoid forces on Z-axis by SteevyT
... x3
3mm washer x1
3-5mm drill bit (and a tool to run it in)
the bearings, screw, and nut from the original set up on the printer.
thingiverse
free
![P3steel 2.x toolson X-Axis 1.1 endstop mount remix by theinternal](/t/8802012.jpg)
P3steel 2.x toolson X-Axis 1.1 endstop mount remix by theinternal
...rsion, the gt2 belt and the m3x6 screws i used.
the 3mm version works best for me but ymmv, so choose the one that works for you.
thingiverse
free
![Laser Tachometer 3mm holes by Penged](/t/5035488.jpg)
Laser Tachometer 3mm holes by Penged
...laser tachometer 3mm holes by penged
thingiverse
i embiggened the holes for 3mm screws. i have many of those and no 2 mm screws.
grabcad
free
![100 mm Wash & Cure Mercury 2 Elegoo Impeller](/t/8333888.jpg)
100 mm Wash & Cure Mercury 2 Elegoo Impeller
...e
1 x m4x10 stainless steel button head cap screw
2 x m3x6 stainless steel flat head cap screws (for the magnets)
happy printing!
3dwarehouse
free
![clockmaker parts for 3mm (axis)](/t/11109678.jpg)
clockmaker parts for 3mm (axis)
...clockmaker parts for 3mm (axis)
3dwarehouse
laser cut clock axis parts in 3mm wooden pieces
Picolorigolo
thingiverse
free
![NAPOLEON by Picolorigolo](/t/8843959.jpg)
NAPOLEON by Picolorigolo
...napoleon by picolorigolo
thingiverse
a new scan via autodesk memento. if you like it please vote.
thingiverse
free
![lightning mario by Picolorigolo](/t/8845373.jpg)
lightning mario by Picolorigolo
...lightning mario by picolorigolo
thingiverse
just a little scan of mario with autodesk memento
thingiverse
free
![fridge grip by Picolorigolo](/t/8931126.jpg)
fridge grip by Picolorigolo
...fridge grip by picolorigolo
thingiverse
i replaced my broken fridge grip by this one 'versailles style'
thingiverse
free
![support microscope USB by Picolorigolo](/t/8931223.jpg)
support microscope USB by Picolorigolo
...microscope usb by picolorigolo
thingiverse
this is a support for a usb microscope with gear to set the view as well as you want.
thingiverse
free
![Christmas ornament by Picolorigolo](/t/8879788.jpg)
Christmas ornament by Picolorigolo
...or your christmas table ornament. the uploaded pieces are at a big scale. i've printed it with a factor of 0.4 of reduction.
thingiverse
free
![support mural pour stepper by Picolorigolo](/t/8271898.jpg)
support mural pour stepper by Picolorigolo
...support mural pour stepper by picolorigolo
thingiverse
support pour accrocher mon stepper au mur
thingiverse
free
![CALYPSO by Picolorigolo](/t/8874022.jpg)
CALYPSO by Picolorigolo
...formations. at this time it's only in french, but main of this instructions are drawings, so you can follow it. please enjoy!
thingiverse
free
![CALYPSO missing files by Picolorigolo](/t/8873930.jpg)
CALYPSO missing files by Picolorigolo
... the incident is now over. by downloading those adding files you will get a complete collection of the necessaries pièces.
enjoy!
thingiverse
free
![FSX AUTOPILOT CONTROL SYSTEM by Picolorigolo](/t/8853299.jpg)
FSX AUTOPILOT CONTROL SYSTEM by Picolorigolo
... work: enroler.h, bounce.h and arduino.h. just download it and uncompress files in the library folder of your arduino’s software.
3Dpburner
thingiverse
free
![3DpBurner² Cable Chain Holders by Kaji_fi](/t/8846079.jpg)
3DpBurner² Cable Chain Holders by Kaji_fi
...ers by kaji_fi
thingiverse
these are pieces to hold cable chain in 3dpburner². modifications are not needed for original files.
thingiverse
free
![All in one panel for 3dpBurner 2 by adiasmesquita](/t/8739300.jpg)
All in one panel for 3dpBurner 2 by adiasmesquita
...all in one panel for 3dpburner 2 by adiasmesquita
thingiverse
all in one panel for 3dpburner 2
thingiverse
free
![3dpBurner 40*40 laser mount by lufton](/t/5099444.jpg)
3dpBurner 40*40 laser mount by lufton
...3dpburner 40*40 laser mount by lufton
thingiverse
this is a 40*40mm 3.5w laser module mount designed for 3dpburner project.
thingiverse
free
![3dpBurner accessories storage bag by villamany](/t/8776746.jpg)
3dpBurner accessories storage bag by villamany
...e .dxf file for storage bag from here: https://youtu.be/1n_t9lk8dmw
more info about 3dpburner project: www.3dpburner.blogspot.com
thingiverse
free
![3DPBurner Spacer Tray by czajkaej](/t/8818615.jpg)
3DPBurner Spacer Tray by czajkaej
...e unit to the frame. now, i have a place to keep the spacer so i wont loose it.
3dpburner:http://www.thingiverse.com/thing:610934
thingiverse
free
![3dpburner dual motor by Chetosvsgeez](/t/8789685.jpg)
3dpburner dual motor by Chetosvsgeez
...r by chetosvsgeez
thingiverse
gracias villamany por su ayuda y consejos. solo falta la conectar la electronica para que funcione
thingiverse
free
![3dpBurner Bridge parts for UpMini by villamany](/t/8944057.jpg)
3dpBurner Bridge parts for UpMini by villamany
...ect height is up to 50-60mm (depending of your working table thickness ). for these parts the max object height is up to 35-45mm.
thingiverse
free
![3dpBurner 2 focus system by highground](/t/8834244.jpg)
3dpBurner 2 focus system by highground
...s - these are for the carriage from the 1st generation 3dpburner however. this makes it even easier to raise and lower the laser.
thingiverse
free
![3dpBurner Material Speed Test by czajkaej](/t/8573010.jpg)
3dpBurner Material Speed Test by czajkaej
...erse
use this to do a speed test on your laser etcher to see what speeds you should use for etching or raster for that material.
thingiverse
free
![3dpburner servo pen actuator by caiosms](/t/8196549.jpg)
3dpburner servo pen actuator by caiosms
...rite a special version of "grbl" for servo applications that you can find here:
https://github.com/robottini/grbl-servo
Coulissant
design_connected
$11
![Couliss](/t/4570450.jpg)
Couliss
...onnected
photo-realistic 3d models of the couliss table from ligne roset for 3d architectural and interior design presentations.
3ddd
free
![журнальный столик COULISS](/t/787592.jpg)
журнальный столик COULISS
...ss , прикроватный
прикроватный столик/журнальный столик couliss
ш 45 cm г 30 cm b 70 cm
turbosquid
$23
![Potocco Coulisse armchair](/t/13474998.jpg)
Potocco Coulisse armchair
...d model potocco coulisse armchair for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1291100)
3d_sky
free
![coffee table COULISS](/t/711558.jpg)
coffee table COULISS
...coffee table couliss
3dsky
bedside
bedside table / coffee table couliss w 45 cm d 30 cm b 70 cm
3d_sky
free
![Side table Ligne Roset Couliss](/t/936737.jpg)
Side table Ligne Roset Couliss
...side table ligne roset couliss
3dsky
ligne roset couliss coffee
side table company ligne roset, model couliss
thingiverse
free
![BOITE QUI COULISSE by an2004](/t/8616963.jpg)
BOITE QUI COULISSE by an2004
...coulisse by an2004 thingiverse une boite avec un couvercle coulissant a crée soit...
thingiverse
free
![coulisse porte armoire ancienne by DD3D](/t/8642014.jpg)
coulisse porte armoire ancienne by DD3D
...coulisse porte armoire ancienne by dd3d
thingiverse
coulisse de porte armoire chambre
thingiverse
free
![Support pied à coulisse mural by Bricoloup](/t/8280634.jpg)
Support pied à coulisse mural by Bricoloup
...support pied à coulisse mural by bricoloup
thingiverse
petit support pour pied a coulisse mural
thingiverse
free
![Holster caliper / protection pied a coulisse by kapy27](/t/8067770.jpg)
Holster caliper / protection pied a coulisse by kapy27
...holster caliper / protection pied a coulisse by kapy27
thingiverse
pour pied a coulisse 300mm
mitutoyo cd-30psx
thingiverse
free
![Couvercle batterie pour pied a coulisse by stef1962](/t/8861557.jpg)
Couvercle batterie pour pied a coulisse by stef1962
...couvercle batterie pour pied a coulisse by stef1962
thingiverse
couvercle pour pied a coulisse.
battery cover for caliper.
Laser
3d_export
$5
![laser](/t/12644112.jpg)
laser
...laser
3dexport
a 3d laser
3d_export
free
![cnc 3dp laser nozzle for 2w laser opt lasers](/t/11532753.jpg)
cnc 3dp laser nozzle for 2w laser opt lasers
...logy that gave birth to cutting and engraving laser heads this laser nozzle was designed for, read the article in the link below:
3d_export
free
![cnc laser mount opt lasers](/t/11532749.jpg)
cnc laser mount opt lasers
...eive the engraving and cutting laser heads this cnc machine laser mount was designed for, read the article on the following page:
turbosquid
$20
![Laser](/t/13326686.jpg)
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![Laser](/t/13303649.jpg)
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
![Laser](/t/13327044.jpg)
Laser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![laser sword](/t/12639627.jpg)
laser sword
...laser sword
3dexport
it is a blue laser sword with a metal frame
3d_ocean
$19
![Laser Turret](/t/593060.jpg)
Laser Turret
...be used in any sf type of game, especially in tower defense games. - laser turret: 3025 polygons - props: 270 polygons - textu...
3d_export
free
![workbee cnc laser mount for opt lasers](/t/11532764.jpg)
workbee cnc laser mount for opt lasers
...the specifications of engraving and cutting laser heads this mount was designed for, please take a look at the following website:
3d_export
free
![shapeoko cnc laser mount for opt lasers](/t/11532771.jpg)
shapeoko cnc laser mount for opt lasers
...ind out the opportunities that adding a cutting and engraving laser head to your cnc can bring, take a look at the website below:
Support
turbosquid
$5
![Support](/t/13237447.jpg)
Support
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
![Support 3D Model](/t/14172.jpg)
Support 3D Model
...support 3d model
3dexport
support cantilever console
support 3d model tasal 73900 3dexport
3d_export
$5
![phone support](/t/11927436.jpg)
phone support
...phone support
3dexport
phone
turbosquid
$12
![Support bars](/t/13366580.jpg)
Support bars
...squid
royalty free 3d model support bars for download as max on turbosquid: 3d models for games, architecture, videos. (1411542)
turbosquid
$8
![support weights](/t/13366582.jpg)
support weights
...id
royalty free 3d model support weights for download as max on turbosquid: 3d models for games, architecture, videos. (1411538)
turbosquid
$2
![headphone support](/t/13241074.jpg)
headphone support
...royalty free 3d model headphone support for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1357583)
turbosquid
$2
![Support for flowers](/t/13334503.jpg)
Support for flowers
...royalty free 3d model support for flowers for download as max on turbosquid: 3d models for games, architecture, videos. (1463543)
turbosquid
$14
![Flower Support](/t/13427582.jpg)
Flower Support
...alty free 3d model flower support for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1497066)
turbosquid
$5
![serum support](/t/13299655.jpg)
serum support
...yalty free 3d model serum support for download as c4d and obj on turbosquid: 3d models for games, architecture, videos. (1551267)
3d_export
$10
![spyro joystick support](/t/11921884.jpg)
spyro joystick support
...spyro joystick support
3dexport
joystick support of spyro dragon