Thingiverse
SuperMicro CSE-512 40x10 Fan Holder by itstheburns327
by Thingiverse
Last crawled date: 3 years, 1 month ago
I made this part for a Supermicro 1U CSE-512 server chassis. It mounts using the existing holes in the front of the chassis. I designed it around the Noctua NF-A4x10 fans but it will accommodate different manufactures. The mounting holes are large enough to allow standard coarse fan screws to pass. Fans with smaller mounting holes may require small washers to accommodate their mounting hardware. This part gives you the option to mount multiple size fan thicknesses. One side will allow for 10mm thick fans and the other up to 30mm thick fans. This part has no cable management but allows for easy routing of SATA, power and front panel connector cables. This part is 42mm tall overall height. I added thicker material around the chassis mounting holes.
For a bit more detail, I have included photos of 2 different servers using these mounts. Both systems are installed in Supermicro CSE-512 1U chassis. My PBX server is running 3 Noctua fans and pfSense server is running 2 fans I found in my fan stash. The Noctua fans are 10mm thick and use standard coarse-thread fan screws or their rubber mounting system. The 2 generic fans are thicker and have smaller mounting holes. I had to use a smaller diameter screw with coarse threads.
I printed this part using Atomic PLA. I used 70% infill for added strength when tightening the fan screws. You may need to add supports for the fan opening if you do not have your printer tuned for bridging. I was able to print this without supports.
For a bit more detail, I have included photos of 2 different servers using these mounts. Both systems are installed in Supermicro CSE-512 1U chassis. My PBX server is running 3 Noctua fans and pfSense server is running 2 fans I found in my fan stash. The Noctua fans are 10mm thick and use standard coarse-thread fan screws or their rubber mounting system. The 2 generic fans are thicker and have smaller mounting holes. I had to use a smaller diameter screw with coarse threads.
I printed this part using Atomic PLA. I used 70% infill for added strength when tightening the fan screws. You may need to add supports for the fan opening if you do not have your printer tuned for bridging. I was able to print this without supports.
Similar models
thingiverse
free
Supermicro CSE-512 1U Chassis Triple Fan Mount by misterjtc
...supermicro cse-512 1u chassis triple fan mount by misterjtc
thingiverse
supermicro cse-512 1u chassis triple fan mount
thingiverse
free
Supermicro CSE-815 Server IO Shield Blank
... the atx io-shield. this is a blank template including step and fusion 360 files to remix and use for you own setup.
have fun :)
thingiverse
free
supermicro 3,5" hdd drive caddy tray (Non-Screw and Screw version!)
...e2
cse-826e2
cse-826e26
cse-828tq
cse-836bhe16
cse-836be16
cse-842xtq
cse-846e1
cse-846e1
cse-847a
cse-847e1c
cse-848a
cse-848e16
thingiverse
free
CSE-846 Server Fan Wall Bracket by Kingjunglemechanic
... that are stock cooling fans with quieter high cfm cooling fans.
only one bracket piece will fit on an ender3 pro bed at a time.
thingiverse
free
Supermicro CSE846 Rear 80mm Fan Shroud
...e way i have them implemented in my chassis is in a sandwich of fan carrier -> fan -> printed shroud -> back of chassis.
thingiverse
free
SuperMicro CSE 846 Back Fan Spacer 80mm x 25mm by runeantonsen
...gap between the back of the chassis and the fan if you swap out the stock fan with a 80x25mm fan.
i've used noctua 80mm fans.
thingiverse
free
Supermicro A1SRI Atom C2000 Fan Bracket by 0x47df
...es.
i used a noctua fan with the supplied rubber mounts, but had to widen the screw holes slightly with a drill to make them fit.
thingiverse
free
Supermicro E200 fan adapter
...pter
thingiverse
adapter to allow for 40x40x20mm depth fans to be mounted into supermicro e200 server with 28mm depth mountings.
thingiverse
free
TFX adapter for supermicro CSE-825 case
... cage (7 screws + 2 rivets), put a silverstone sst-tx300 psu inside the case and used this adapter to attach everything together.
thingiverse
free
1U Server Rack Cable Ring by ComanderMuffif
... by comandermuffif
thingiverse
1u server rack cable guide. this was designed for a pre-threaded rack and not a square hole rack.
Cse
3ddd
$1
Andretti / Flushmount
...andretti / flushmount 3ddd andretti http://www.lumens.com/uu239396/product?ad_id=houzz&utm;_source=houzz&utm;_medium=cseamp;utm;_campaign=houzz&utm;_term=andretti%20flushmount%20by%20et2 ...
3ddd
$1
Stilt Floor Lamp
...stilt floor lamp 3ddd http://www.lumens.com/uu330120/product?ad_id=houzz&utm;_source=houzz&utm;_medium=cseamp;utm;_campaign=houzz&utm;_term=stilt%20floor%20lamp%20by%20blu%20dot ...
3dfindit
free
CSE
...cse
3dfind.it
catalog: a&t
3dfindit
free
CSE
...cse
3dfind.it
catalog: a&t profile
thingiverse
free
Supermicro CSE-512 1U Chassis Triple Fan Mount by misterjtc
...supermicro cse-512 1u chassis triple fan mount by misterjtc
thingiverse
supermicro cse-512 1u chassis triple fan mount
thingiverse
free
TFX adapter for supermicro CSE-825 case
... cage (7 screws + 2 rivets), put a silverstone sst-tx300 psu inside the case and used this adapter to attach everything together.
thingiverse
free
Supermicro CSE-815 Server IO Shield Blank
... the atx io-shield. this is a blank template including step and fusion 360 files to remix and use for you own setup.
have fun :)
thingiverse
free
CSE-846 Server Fan Wall Bracket by Kingjunglemechanic
... that are stock cooling fans with quieter high cfm cooling fans.
only one bracket piece will fit on an ender3 pro bed at a time.
thingiverse
free
supermicro 3,5" hdd drive caddy tray (Non-Screw and Screw version!)
...cse-828tq cse-836bhe16 cse-836be16 cse-842xtq cse-846e1 cse-846e1 cse-847a cse-847e1c cse-848a cse848e16 ...
thingiverse
free
SuperMicro CSE 846 Back Fan Spacer 80mm x 25mm by runeantonsen
...gap between the back of the chassis and the fan if you swap out the stock fan with a 80x25mm fan.
i've used noctua 80mm fans.
Supermicro
thingiverse
free
Supermicro io Shield by oscarwnr
...supermicro io shield by oscarwnr
thingiverse
supermicro io shield
thingiverse
free
IO Shield for Supermicro X9SRA
...io shield for supermicro x9sra
thingiverse
spare io shield for supermicro x9sra.
thingiverse
free
Supermicro E200 fan adapter
...pter
thingiverse
adapter to allow for 40x40x20mm depth fans to be mounted into supermicro e200 server with 28mm depth mountings.
thingiverse
free
Supermicro SC743 Drive Tray
...ive tray
thingiverse
this hot-swap drive tray fits the supermicro sc743 chassis, and is a replacement for part mcp-220-00092-0b.
thingiverse
free
Supermicro Server 3.5" Harddrive Caddy
...ngiverse
very simple supermicro server caddy / tray for 3.5" harddisk.
superworkstation 7046a-3 sys-7046a-3 4u compatible
thingiverse
free
1U IO Shield/Backplate for Supermicro A1SAI/A1SRI Mainboards by 3DMK
...erse
backplate for supermicro a1sai/a1sri mainboards, usable in a 1u supermicro chassis where standard atx backplate is too big.
thingiverse
free
Backplate Motherboard Supermicro C2SEA by groing
...backplate motherboard supermicro c2sea by groing
thingiverse
this is the backplate (cover) for my serverboard
thingiverse
free
SuperMicro-Server-Shroud_rev2 by suprsurfr
...supermicro-server-shroud_rev2 by suprsurfr
thingiverse
i added a louver to direct cooling towards the pci express slot.
thingiverse
free
Supermicro SC-745 120mm-fan-wall by Mak3rBod
...-745 120mm-fan-wall by mak3rbod
thingiverse
convert your supermicro sc-745 (standard) 80mm fan wall to 120mm.
enjoy the silence!
thingiverse
free
Supermicro CSE846 2.5" Drive Mount
... to be fastened to the bottom two screw holes on the drive tray in order to help support the bottom against the wall of the case.
40X10
thingiverse
free
40x20 40x10 Fan Cover by taviralber
...40x20 40x10 fan cover by taviralber
thingiverse
40x20 40x10 fan cover
thingiverse
free
40x10 Fan Reference by TheNoob0
...ing in my cad software to make a 40x10 fan. you can use this for designing fan shrouds or whatever you want
designed with onshape
thingiverse
free
Ender 3 SKR 1.3 SKR 1.4 BOX Double 40x10 fans by AlexKayman
...y good for cooling but too loud, double 40x10 fans are much better for ears and still doing its job fine.
use m3 bolts to intall.
thingiverse
free
CR-10 Noctua 40x10 fan dial gauge mount by xmdwheeler
...ched to the front of the 'cr-10 heavy duty customisable modular e3d v6 mount volcano 5015 abl' found here on thingiverse.
thingiverse
free
40x10 fan cover with grill by ikari87
... with options to use the mounting holes if required.
also included file for just the skirt if you don't want/need the grill.
thingiverse
free
Ender 6 Mainboard Fan Upgrade to 40x10 by Fugenkitt
... some other m3 screws.
the setup works really well and even the bottom side of the mainboard will gett fresh air for long life :)
thingiverse
free
Hydra Fan Duct & Tool Change V6 Edition Extended BLTouch for 40x10 Noctua Fan by lKagel
...n hand with this:
https://www.thingiverse.com/thing:3154199
edit 15/12/2020: the linked thing doesnt work with the hydra fan duct
thingiverse
free
Ender 3 v2 V5 Hotend and Blower Fan Upgrade by Kaya3D
...v5 hotend and blower fan upgrade by kaya3d thingiverse 40x10 blower fan 40x10 fan e3dv5...
thingiverse
free
Noctua 40x10 Fan Shroud for mcHF SDR Radio by acruxksa
...t it as needed..
https://cad.onshape.com/documents/d8914f986ceb472af1daa945/w/ac5c415cf06c86df3b869b27/e/14c2711f73e09c0e49abe68a
thingiverse
free
Fan adapter 40x10 to 35x10 (BiQu Hotend) by lightninglord88
...tional material needed:
-2pc threaded brass inserts m3 (for type 1 only)
-2pc din912 m3x6
-2pc screws for fan (i.e. din912 m3x10)
512
3ddd
$1
Axo 512
...axo 512
3ddd
om , стул
bn office system ukraine
3d_export
$25
512 Ombra 3D Model
...yo cassina lounge chair cozy sofa charlotte perriand 1953 contemporary modern design
512 ombra 3d model grayback23 49857 3dexport
3ddd
$1
Baga 512
...512
3ddd
baga
модель соответствует оригиналу, декор и основные формы тоже очень похожи ;)
материалы настроены, .obj в комплекте.
turbosquid
$9
Sartory Rugs Nc-512
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Ceska zbrojovka 512 3D Model
...ceska zbrojovka 512 3d model
3dexport
rifle weapon wmr low-poly
ceska zbrojovka 512 3d model alexander12091995 41369 3dexport
3ddd
$1
SPECTRUM GP 512
...spectrum gp 512
3ddd
трансформер
обеденный раскладной стол. сайт производителя:http://spektrum-mebel.ru/item.php?id=556
3d_export
$60
Architecture 512 3D Model
...lege campus max street landscape commercial building medical hospital offices
architecture 512 3d model lotusmodel 48618 3dexport
cg_studio
$35
Ferrari 512 S Coda3d model
...512 s coda3d model
cgstudio
.max - ferrari 512 s coda 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Siena mirror 512 ivory / gold
...siena mirror 512 ivory / gold
3ddd
siena
71х6х106(дхшхв)
3d_export
$160
3d building 512 3D Model
...metropolis street block detailed definition realistic skyscraper huge collection
3d building 512 3d model kanhtart 44551 3dexport
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.