Super Hooks! - A Modular Kitchen and Closet Hanging System by qJake

Last crawled date: 3 years ago

Super Hooks!
A customizable kitchen and closet hanging system.
Mix and match any of the following:
Hook Type
Small Hanger (Good for spoons and spatulas)
Large Hanger (Good for scissors)
Peg (Compatible with standard kitchen utensil hanging hole)
Also comes in "short" variation


End Type
Left End
Right End
Center

Mounting
Center Screw Hole
No Screw Hole

I would recommend a screw hole for every 3-5 segments to ensure that the segments don't come apart or twist during use (even when glued). Space the screw holes out evenly, and try putting them on the end when possible.
Dimensions
Each standard segment is 90mm long (short segments are 66mm), 30mm tall and 6mm thick. Hanger pegs stick out 44mm, the smaller hook peg sticks out ~21mm.
Printing
Super Hooks were designed to not require supports when printing! (Maximum overhang is -45° on 2-4 layers of the hanger pegs)
Recommended materials: ABS, PETG, PLA+/Pro PLA (any rigid, durable material)
Shells: 3+
Top layer: 3+
Bottom layer: 2+
Infill: 25%+ (for the pegs more than the base)
Print so that the pegs are pointing upward (if your slicer does not use Z-Up coordinates).
Mounting
Snap the parts together, glue, and finish if desired.
Obtain #8 drywall screws - the holes were designed around these Cobra TripleGrip 171R 51lb Drywall Anchors:

Or, if securing your own screws:
Screw diameter including threads: 4.3mm
Head diameter: 7.8mm
Head height: 3mm
Screw length: 20mm or longer (mine are 35mm)