Super-compact_i3_bed-mounted_Raspberry_Pi_camera Fixed\Rotated by doesntfearzeus

Last crawled date: 3 years, 1 month ago

Updated(2018/03/10): See Below
Updated(2018/11/11): See Below
Remixed from WaveSupportApparatus's Super-compact i3 bed-mounted Raspberry Pi camera.
The post's IC slot is on the wrong side. I had to mirror the post to fit my Raspberry Pi v2.1 camera. If your camera is different, perhaps use the post from the original.
This camera mount is great for enclosures, but I've got the Z-brace mod so I needed to rotate the base post hole to suit where I could mount the camera.
The base and post were very loose when I printed this. I inserted 4 little half-balls into the sides of the base hole so that it would hold the post tight. They are working great.
The original is a great design that gives a pretty good view of the print bed and it's very stiff so the camera isn't shaking anymore like other camera mounts I've tried.
The back file is unchanged from the original, though it could use some extra depth to fit better overall.
Updated(2018/03/10):
In case you're printing something big, you might need a riser for the camera. Added those.
Updated(2018/11/11):
Added Thicker Back for the camera that fits with the V2.1 camera(14mm). Added new base with 5 and 10 degree rotated hole so you can get the camera more tilted towards your print job. This base also has more dots inside to help with a firm grip. I needed to sand these down a bit with a file to get the post to fit.