Thingiverse
Stronger Extruder Idler for Eckertech Extruder by Bracken
by Thingiverse
Last crawled date: 3 years ago
The default idler splits between layers after repeated tightening, it also can't be made sufficiently tight on hobbed bolts cut any deeper than their own bolt which is " widely considered the best hobbed bolt on the market", they really said that.
Anyway, I made a clone in openscad that prints the other way up so the layer bonding is no longer an issue. It should be printed in PLA, ABS will flex and weaken over time, PLA is more rigid. As you can see in the video it slots in as nicely as the original.
Any issues, let me know and I'll see about improving the part.
http://youtu.be/HmJ9fMMfU7o
Anyway, I made a clone in openscad that prints the other way up so the layer bonding is no longer an issue. It should be printed in PLA, ABS will flex and weaken over time, PLA is more rigid. As you can see in the video it slots in as nicely as the original.
Any issues, let me know and I'll see about improving the part.
http://youtu.be/HmJ9fMMfU7o
Similar models
thingiverse
free
Extruder using 6mm Burr instead of hobbed bolt for Prusa i3 by dmoorhou
...de idler for 3mm filament will work as that is all i used.
the two bearings needed for the burr are 6mm id 19mm od and 6mm width.
thingiverse
free
Alpha Direct Drive Extruder by engineglue
...upply list; this is a minimal design. you can use m4 bolts and nuts to mount it. it mounts to a standard aluminum mounting plate.
thingiverse
free
Printrbot Jr. Upper & Lower Filament Guides (1.75mm) by phraust
...re was too much wobble in the channel below the hobbed bolt and above the extruder, so i added in a lower filament guide as well.
thingiverse
free
Radus mini extruder nema17 with hobbed bolt by radus
...4
need
2x688 bearing 8x16x5 - for bolt
1x686 bearing 6x13x5 - for idler
hobbed bolt 8 mm with 13.5 mm tooth offset
motor nema17
thingiverse
free
Dual hobbed bolt extruder V2 by odino
...
it should work fine even at high speed.
still wip. i haven't print it yet.
as soon as i can i'll upload the single stl
thingiverse
free
Direct Drive (Gearless) Extruder by brnrd
...the hobbed bolt should work for 1.75 mm filament if a mk7 gear drive is used instead.
i've also included a 40 mm fan bracket.
thingiverse
free
Bolt Hobbing Tool by timschmidt
...tool to help me hob a toothed channel in a drive bolt for a wade's extruder. i've printed one, and used it successfully.
thingiverse
free
Velleman K8200 extended extruder base for flex pla by EricSw
...ded to be drilled a little bigger.
but it works.
maybe someone with better drawing skills can adjust this into a perfect fit..
thingiverse
free
Lulzbot Hexagon Extruder Modification by oozeBot
...ing assembly, take note of the alignment of the hobbed bolt. use washers to correctly align the hob with the filament's path.
thingiverse
free
Hobbed Bolt Bowden Drive by tech3d
...
nb: i've added a modified huxley mount. i haven't tested this as i don't have a frame. let me know if you try it. :)
Eckertech
thingiverse
free
Eckertech 80mm led ring by outcastrc
...eckertech 80mm led ring by outcastrc
thingiverse
simple mount to attach an 80mm led ring to an eckertech extruder.
thingiverse
free
eckertech Hot end conversion kit for Nema 17 Prusa style machines by eckertech
...orks files are available on our github account here: https://github.com/eckertech/ecksbot/tree/master/mods/prusa%20carriage%20mod
thingiverse
free
Eckstruder for Prusa by eckertech
...date: updated the eckstruder block to make it easier to mount different types of hot ends. basically just flattened the bottom.
thingiverse
free
ecksbot Bearing Housing by eckertech
... for adhesion and fits together better than the old version.
for more information on the ecksbot please visit www.eckertech.com
thingiverse
free
40mm fan grill by eckertech
...t the number of times that i've felt that irritating ping on my finger tip while fiddling around near a running extruder fan.
thingiverse
free
ecksbot by eckertech
... z height adjustments. the new bearing housing requires only acetone for adhesion and fits together better than the old version.
thingiverse
free
ecksbot packing support by eckertech
...3d printers.
this support will help prevent your x-carriage from bouncing up and down when travelling/shipping to a new location.
thingiverse
free
Sells Mendel improved X Carriage for EckerTech Hot End by eckertech
...ring bolt holes to provide better clearance for the heatsink.
we also added spiral wrap tubing adaptors to clean up the wiring.
thingiverse
free
ecksbot X End Idler with Z Adjuster by eckertech
... for easy z height adjustments. requires a 3mm x 25mm bolt.
for more information on the ecksbot please visit www.eckertech.com
Bracken
thingiverse
free
Bracken's Shed by Bracken
...his is my parametric shed, i made it to see what making a shed would cost in materials and enabled customizer for your enjoyment.
renderosity
$7
Bracken Mega Bundle
...ue's powerful materials capabilities and have been made as botanically accurate in both growth habit and appearance</p>
thingiverse
free
Sizing Die by Bracken
..., 8, 13 sequence for development sizings. guaranteed to underestimate an order of magnitude less on average than real developers.
thingiverse
free
Superlambanana by Bracken
... you too can have superlambanana on your desk!
the scan can be found here: http://www.123dapp.com/obj-catch/superlambanana/938495
thingiverse
free
Brompton Eazy Tyres by Bracken
...rs. it makes them a little larger, but not as much as the eazy wheels. it makes them much quieter, but of course adds no bearing.
thingiverse
free
Mendel Filament Guide by Bracken
... spool is mounted simply on a bar attached at 90 degrees to the two uppermost bars in the mendel frame with a pair of bar clamps.
thingiverse
free
Spool for coiled filament that can mount on a rod by Bracken
... of excellent faberdashery filament i made a spool to hold it... and then drilled a hole through the middle to mount it on a rod!
thingiverse
free
Alfa Romeo 159 Boot Pusher Upper Bush by Bracken
...sh by bracken
thingiverse
replacement bush for the thing that pushes the boot up when you press the badge on the alfa romeo 159.
thingiverse
free
LED Strip Mount for 8mm Threaded Rod by Bracken
...sive led strips on your i2 with this clip on thingy. includes strain relief for the wire. it clips on really well printed in abs.
thingiverse
free
Printable Stretchy Bracelet by Bracken
...-module branch.
best sliced with cura, i tried slic3r but crossing perimiters at all makes the inside of the band like sandpaper.
Idler
3d_export
$20
telescopic stacker belt conveyor
...and the actual components are as follows cema c idler cema c impact roller dodge bearing avoid tension bearing...
3d_export
$49
Liebherr R9250 Tracks - Crawler
...main parts: bottom rollers car bodies final drives top idler front idlers slewing rings-turntable bearings sprockets text track chains...
3d_export
$119
JD - 953MH Tracked Log Loader
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$129
JD - 959MH Tracked Feller Buncher
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$119
JD - 959MH Tracked Log Loader
...boby with engine<br>main body bolts<br>main body grilles<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right track chain<br>right track links<br>right track protector<br>right...
3d_export
$119
JD - 953MH Tracked Harvester
...tool - lower<br>moving limbing tool - upper<br>pedals<br>right - front idlerlt;br>right - rear idler<br>right feed rollers<br>right track chain<br>right track links<br>right...
thingiverse
free
Idler seat by jcen517
...idler seat by jcen517
thingiverse
idler seat
thingiverse
free
Idler by GEON_3D
...idler by geon_3d
thingiverse
idler para extrusor 1,75
imprimir en abs, petg o cualquier material resistente
thingiverse
free
wade idler by nautilux
...wade idler by nautilux
thingiverse
wade idler reforzado
thingiverse
free
Idler Frame by Dinusha
...idler frame by dinusha
thingiverse
idler frame specially for the belt conveyors.
Stronger
3d_export
$5
gorilla monster stronger rigged
...stronger rigged
3dexport
gorilla zombie made in blender<br>textures albedo,normal,specular 1024x1024<br>rigged model
3d_export
$39
Mercedes-Benz G Line Stronger Than Time 2021 wheel
...mercedes-benz g line stronger than time 2021 wheel
3dexport
3d_export
$129
mercedes-benz g 400 d amg line stronger than time 2021
...------------------------- thank you for buying this product. we look forward to continuously dealing with you. creator 3d team!!!
3d_export
free
monster flower
...power that gave the flower the ability to grow stronger and...
3d_export
$60
lockheed martin f-35 c lightning ii
...wingtip sections, larger control surfaces for improved low-speed control, stronger landing gear for the stresses of carrier arrested landings,...
3d_ocean
$15
New Shoe
...so forth this is a 3d model. it is stronger and more lasting shoe is comfortable and sturdy and...
3d_ocean
$5
HDRi Studio Light 5
...studio hdri hdri studio light 5 front light is stronger then the side ones. 10000×5000 px hdr exr...
3d_ocean
$10
Green-Steel Weapon Set
...models. a special emerald powder ingredient makes green-steel much stronger than ordinary...
3d_export
$7
wheel rims
...the connection between parts of structures to make it stronger and the movements of each prong to make it...
3d_export
$5
Bill chipper
...beings in the entire multiverse. only the axolotl is stronger than him (a little more about him later). his...
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.