Thingiverse
String Threader by pedaldoc
by Thingiverse
Last crawled date: 3 years, 1 month ago
ever pulled that string on your hoodie or your PJ pants a little too far and now it's out? you can try and rethread it with a safety pin or a straw or just loop or tie it to this tool and thread it right back in under 30 secs.
the pencil portion is 8mm so if you have trouble with your string tunnel not being that big, scale it down by 30 or 40% without having to redesign the whole thing
VERSION2 HAS A POINTED TIP IN CASE YOU NEED THAT TO ADVANCE IT EASIER. may need supports to print the tip depending on your printer
the pencil portion is 8mm so if you have trouble with your string tunnel not being that big, scale it down by 30 or 40% without having to redesign the whole thing
VERSION2 HAS A POINTED TIP IN CASE YOU NEED THAT TO ADVANCE IT EASIER. may need supports to print the tip depending on your printer
Similar models
thingiverse
free
Button Spinner by Invents_Studio
...hick string to attach them for durability. the string should be less than 1 cm in diameter (0.5cm-0.7cm in diameter recommended).
thingiverse
free
US 50 or 25mm circulat knitting needles by JudyBarron
...ith the other end of the string on the second tip 2 and insert in the second tube and attached the second tip 1 on the other end.
thingiverse
free
yoyo
...yoyo
thingiverse
the body of a yoyo you only have to add the string and then you have your essential toy
thingiverse
free
Curtain String Weight by DanLuc
... again if you have a puppy you just might.
our puppy, joy decided to have a go at the string weight so i had to make another one.
thingiverse
free
Tuner Turner by cpertchik
...iety of stringed instruments, not just guitar. but if you play a 12 string . . . well what more can i say?
ps: makes a nice gift.
thingiverse
free
Single string capo (Fretlocks) by Fabi0_Z
...s equal to 3,302 millimeters) and you need to have this value as diagolan distance between the blocks in order to fit the string.
thingiverse
free
RC Drop Module by PrintTo3D
... rc aircraft? then this is the module for you!
it is mounted to your aircraft using either double sided tape, velcro, or string.
thingiverse
free
Flying Propeller Toy by 24mhaggag
...ife on. the pieces fit together but need glue. you also need a string to use as a pull cord. note: i have not tested this at all.
cults
$2
Hollow blade tip
...w blade tip
cults
lightsaber pixel blade string blade
a hollow lightsaber blade tip designed for use with string and pixel blades
thingiverse
free
Spiderbeam Light 7m Mast Tip Cap. by Radio_Prepper
...ingiverse
this is designed to fit on the tip of the spiderbeam 7m light mast to thead in your antenna wire or a piece of string.
Pedaldoc
thingiverse
free
18650 Box by pedaldoc
...rse
didn't need the lid and needed some mounting holes. all the credit goes to medlex
printed at 0.3 with 5% infill with abs
thingiverse
free
IFixIt Tweezer thin tips by pedaldoc
...will work with 20 or 25% just as well. so thin at tips not much room for infill anyway
green images are nylon
copper ones are pla
thingiverse
free
Samsung Galaxy S7 Cable Protector by pedaldoc
...t too) so i ended up having to scale to 103% to get the cable to fit inside without damaging it going in.
hope this helps a few.
thingiverse
free
PS3 Eye Cam printbed mount by pedaldoc
...asier especially as you first get the nut started. it's not designed to withstand a lot of torque just help you hold it still
thingiverse
free
4 Gang Relay holder by pedaldoc
...re are of the relay tabs to be in contact with the adapter below.
moved, enlarged and recessed screw head hole to allow mounting
thingiverse
free
Original Prusa i3 MK2 Nozzle holder and tool Box by pedaldoc
... easier. so print the box portion and the nozzle portion and glue them together. i'd advise not trying to print the one piece
Threader
thingiverse
free
Waistband threader by matschi
...r your hoodie.
i still have to figure out how to effectively get the cord hold onto the threader.
right now you just make a knot.
thingiverse
free
Filament Threader by DrUsual
...e loose end constantly through the gap in the back of the desk.
there are two files; a single threader and a "fiver."
thingiverse
free
Customizable threader (nauhanpujotin) by postdoc
...s, hoodies etc.
tätä pujotinta voi käyttää eri levyisten ja paksuisten vyötärökuminauhojen, hupparin nauhojen yms. pujottamiseen.
thingiverse
free
Bobbin Threader by ecafruoy
...r by ecafruoy
thingiverse
i needed... i designed... i 3d printed.... now i can art with colored threads. tesla art example shown
thingiverse
free
Low-poly Goa'uld Needle Threader by Alex2244
...find this model here http://armadafiles.com/files/armada-2/ships/stargate/goauld-needle-threader/details
and i convert it to .stl
thingiverse
free
Plastic Elastic Guide Glides Threader DIY Sewing Accessories
... but i assume it could also work for ribbon, drawstrings and cording, bag rope, etc. a great accessory for sewing craft projects.
thingiverse
free
Elastic Threader by Mquin123
...f necessary.
if you need and elastic threader of a bigger or more specific size of mouth, leave a comment and i may respond back.
thingiverse
free
Hoodie string threader by kerri9494
...nted one that was really long, and very flexible. so here you go, printed diagonally on a 12" bed on a flashforge guider ii.
thingiverse
free
Brother Sewing Embroidery Machine Needle Threader Button by jessmakes90
...s that push down the automatic needle threader keep falling off and break down over time. now we have a replacement part! woohoo!
thingiverse
free
Serger Threader/ Feeder for Brother by Dino340
...places, so i quickly copied it into fusion 360 and printed him a new one, it's a bit long but fits on the mk2 bed diagonally.
String
3ddd
$1
String W1
...string w1
3ddd
светильник string w1
turbosquid
$25
String
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$13
String Chair
...string chair
designconnected
magis string chair computer generated 3d model. designed by azumi, shin.
3ddd
$1
String Rack
...string rack
3ddd
декоративный набор
string rack is purpose for decorative object in living room or in study room.
turbosquid
$10
String bikini
...bosquid
royalty free 3d model string bikini for download as on turbosquid: 3d models for games, architecture, videos. (1559187)
3ddd
$1
String F1
...string f1
3ddd
rotaliana
rotaliana
string f1
design dante donegani, giovanni lauda (2011)
lower arm 80 cm
upper arm 46 cm
turbosquid
$62
Chill String
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
On-A-String-Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Elixer strings
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Dunlop Strings
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.