Thingiverse
StretchBee by CesiumSalami
by Thingiverse
Last crawled date: 3 years ago
This is a quadcopter is designed for 3" props (UPDATE: there's a 2.5" [~66mm max] and 2" version now, too). I don't know about the stretch hype train on quads, but I wanted to try one out! So far this flies great! It'll fit the HQProp 3030's just barely (those are slightly oversized 3" props)
I'm running DYS 1104 6500kv motors, VTX03, OMNIBUS Nano F3, 1000tvl camera right now (that may or may not be out of focus or just suck). I'm only running 2s right now, but it should run 3s just fine. I'm using 500mah 2s batteries and the AUW is under 115g.
MAIN VERSION
"StretchBee_20x20_SlightlyStronger" - fits the GreenBee camera mount and a 20x20 mounting fc but has just a little more material in critical areas for strength. The battery strap holder should also more closely match the one on the original green bee. dxf file of this is posted in case you're interested in that (as shown in the main picture) [ i don't know why the file is so huge ..... ]
This is a dovetail of the GreenBee Project.
My PETG print of this broke reasonably quickly, but that was at like 40% infill. The second print I did was in Taulman 910 at 60% infill and has proven to be stiffer and a lot stronger. So far so good!
Should fit the following motor types: 1103, 1102/4/5, 1306, 1407
WANNA BUY IT IN CARBON?
3mm: https://armattanproductions.com/pages/product_details/7562
The 3mm is shown above with... so far so good at 15.15g
4mm: https://armattanproductions.com/pages/product_details/7563
CCD CAM Mounts and Other Frame Options:
I highly suggest (though haven't yet tested) a CCD cam mount from T4b_ he also has models for beefier builds perhaps more suitable for general purpose 3d printing and links to CARBON hexa and other quad versions: http://www.thingiverse.com/thing:1783281
OTHER VERSIONS
One, "StretchBeeFullSized" Does not fit the GreenBee camera mount. It does fit a standard sized fc though .... in theory ... I haven't tested it.
*"345Stretch.stl" - is the original one that I posted (as shown in the cad mockup).
I'm running DYS 1104 6500kv motors, VTX03, OMNIBUS Nano F3, 1000tvl camera right now (that may or may not be out of focus or just suck). I'm only running 2s right now, but it should run 3s just fine. I'm using 500mah 2s batteries and the AUW is under 115g.
MAIN VERSION
"StretchBee_20x20_SlightlyStronger" - fits the GreenBee camera mount and a 20x20 mounting fc but has just a little more material in critical areas for strength. The battery strap holder should also more closely match the one on the original green bee. dxf file of this is posted in case you're interested in that (as shown in the main picture) [ i don't know why the file is so huge ..... ]
This is a dovetail of the GreenBee Project.
My PETG print of this broke reasonably quickly, but that was at like 40% infill. The second print I did was in Taulman 910 at 60% infill and has proven to be stiffer and a lot stronger. So far so good!
Should fit the following motor types: 1103, 1102/4/5, 1306, 1407
WANNA BUY IT IN CARBON?
3mm: https://armattanproductions.com/pages/product_details/7562
The 3mm is shown above with... so far so good at 15.15g
4mm: https://armattanproductions.com/pages/product_details/7563
CCD CAM Mounts and Other Frame Options:
I highly suggest (though haven't yet tested) a CCD cam mount from T4b_ he also has models for beefier builds perhaps more suitable for general purpose 3d printing and links to CARBON hexa and other quad versions: http://www.thingiverse.com/thing:1783281
OTHER VERSIONS
One, "StretchBeeFullSized" Does not fit the GreenBee camera mount. It does fit a standard sized fc though .... in theory ... I haven't tested it.
*"345Stretch.stl" - is the original one that I posted (as shown in the cad mockup).
Similar models
thingiverse
free
Sideswipe - 11xx Brushless Frame by CesiumSalami
...ttps://armattanproductions.com/pages/product_details/13261
top 1.5mm: https://armattanproductions.com/pages/product_details/13260
thingiverse
free
T4bee 16x16mm FC size smallest possible frames for 0703, 0705 and 0806 motors and various prop sizes with simple cam holder or cam pod by t4b_
.../www.thingiverse.com/thing:2248569
check out this awesome flight video of a 2s version from b14ckyy: https://youtu.be/mzhcrjdbgi4
thingiverse
free
26x26mm FPV Camera Mount by mrmj2u
...t sure if it will work, but the measurements check out. holes must be drilled for mounting of the camera and the included swivel.
thingiverse
free
ImpulseRC Alien 2.5" Micro Quad for 11xx by CesiumSalami
...r motors of this size. if i was going to build a really fast version of this - i'd probably go 1105/6, 3s and the 3mm plate.
thingiverse
free
Squeech V12 by jakewells
...-2300kv motors up to 4 inch props. i personally use a run cam night own fpv cam which fits. haven't tested any other cameras.
thingiverse
free
Barricade V2 - Light Quadcopter for 56mm Props - Prop Guards. by CesiumSalami
...attanproductions.com/pages/product_details/7565
barricade v2 45 1.5mm: https://armattanproductions.com/pages/product_details/7564
thingiverse
free
Sidewipe - 2.5" Brushless Micro Frame - Upgrades by Flowr
...ough, and i can work on that.
the cam mount is designed for m3 hex standoffs.
orginal : https://www.thingiverse.com/thing:2751469
thingiverse
free
Five33 Switchback micro cam mount
...s further back and you can use 2 zipties (one on the top and one on the bottom) to make sure the screws don't get pulled out.
thingiverse
free
Convertion frame from QX90 to diy 2s tiny whoop by Flying_Ginger
...the quad might make a loud whistling noise.
this quad is a few mm larger than a standard inductrix, so it will not fit most cases
thingiverse
free
ImpulseRC Alien PDB Replacement / Blank & Nut Holder by CesiumSalami
...etely ignored, so right now i don't plan on redoing to be a little less snug, but if people are interested, just let me know.
Cesiumsalami
thingiverse
free
Tiny Whoop Frame - Minimal by CesiumSalami
...signed to be printed in nylon, but should work in other filaments just fine.
should fine any standard tiny whoop board and props.
thingiverse
free
TX02 Model STL by CesiumSalami
... and is was super helpful. i'm happy to take down the design the creator wants to incorporate this stl file into their files!
thingiverse
free
2020 Was Dog Poop Ornament by CesiumSalami
...e dog ornament. step files included... but the models aren't fantastic as a result of me just converting .obj files to breps.
thingiverse
free
RealAcc X210 Pro ROUGH SKETCH of Base Plate by CesiumSalami
...2mm. i used that measurement and a photo to very roughly sketch this design. only use this as a guide - it's not definitive.
thingiverse
free
FR7 DJI Platypuss Triple SMA for BN220, Matek M8Q, TBS M8.2 by CesiumSalami
...giverse
remix of the dji specific triple sma to fit the bn220 / tbs m8.2 / or matek m8q-5883
hole for gps measures: 22x20x~5.8mm
thingiverse
free
Flight Controller Soft Mount or FC softmount by CesiumSalami
...t. if you have a usb or other hardware that needs a little space the one with tall "standoffs" might be better for you.
thingiverse
free
2020 Dumpster Fire Ornament - Thin by CesiumSalami
...t i'm not sure how if stiffer filaments would need to be filed or downsized to fit. step file included if that's helpful.
thingiverse
free
Sideswipe - 11xx Brushless Frame by CesiumSalami
...ttps://armattanproductions.com/pages/product_details/13261
top 1.5mm: https://armattanproductions.com/pages/product_details/13260
thingiverse
free
QAV-X Realacc x210 Gopro Session mount Easy Mode by CesiumSalami
... need to file down the camera guard (the camera guard pictured above is in this thing: https://www.thingiverse.com/thing:2054283)