Thingiverse
Stratux Modular Slim Case by pavel569
by Thingiverse
Last crawled date: 3 years, 1 month ago
5/1/17 - Added module for CP2102 USB to serial adapter and dual USB connector extension. The USB socket is connected - #1 to Raspberry Pi free USB port and #2 to CP2102 which will be connected via USB cable to my EFIS RS232. All connection were soldered. The antenna is direct plug to RTL Nano. Holes for antennas are shape different with matching cable end for easy identification.
1/15/17 - Added some modules for newer Nano 2+ which is little bit longer.
12/25/16 - Added some more modules for different adapters and positions, side mount for holding 2 mini antennas (you need to print updated top with side holes) front or back (reversed) load, added full face GPS plug with thin wall recess for easy cable cutout.
This is a somehow modified Slim Case by helno - SD card opening is cut deeper for easy removal, more vent holes. The modules can be design to fit a different components mounted to Raspberry Pi - GPS, AHRS etc.
Hardware is 2-56 screws and brass inserts for plastic -https://www.mcmaster.com/#99362A100,https://www.mcmaster.com/#90241A087
1/15/17 - Added some modules for newer Nano 2+ which is little bit longer.
12/25/16 - Added some more modules for different adapters and positions, side mount for holding 2 mini antennas (you need to print updated top with side holes) front or back (reversed) load, added full face GPS plug with thin wall recess for easy cable cutout.
This is a somehow modified Slim Case by helno - SD card opening is cut deeper for easy removal, more vent holes. The modules can be design to fit a different components mounted to Raspberry Pi - GPS, AHRS etc.
Hardware is 2-56 screws and brass inserts for plastic -https://www.mcmaster.com/#99362A100,https://www.mcmaster.com/#90241A087
Similar models
thingiverse
free
Stratux AIO Case by pavel569
.../www.thingiverse.com/thing:1920485 .
usb socket has all the connections soldered.
side antenna mount has relief for side venting.
thingiverse
free
Case for Sainsmart LCD / Raspberry Pi / Controller mount by majormunky
...or the hdmi connections.
also included is a bracket and mount to mount them to a ps3 controller. everything is work in progress.
thingiverse
free
Raspberry Pi B+ case with 2.5" hard drive mount by gilfillan94
...quot; hard drive, usb cables can be routed and plugged in internally to keep it tidy.
all screw holes are intended for m3 screws.
thingiverse
free
Raspberry Pi Case - Adafruit Ultimate GPS HAT by bcheck555
...adapter for an external antennae.
4x 2.5mm x 11mm f/f standoff
4x 2.5mm x 8mm socket cap screws
4x 2.5mm x 10mm socket cap screws
thingiverse
free
Case for Raspberry Pi with 7inch HDMI Display by MegaCadler
...back side provide cooling air as well as access to raspi pins and sd card.
the side cap can be removed to plug usb or lan cables.
thingiverse
free
Stratux ADS-B Dual Tuner Case by tbirdrv
...pi, gps and wi-fi status lights. if you use a rpi3 you will have to drill a small hole to view the rpi3 power and activity leds.
thingiverse
free
Case for Raspberry Pi 4 40mm remixed by rooy
...spberry pi 4 40mm remixed by rooy
thingiverse
added holes at bottom to mount
and two holes for pi camera ribbon cable on the top
thingiverse
free
Raspberry pi zero CCTV case
...o inside cctv.
i have added a pi fan to avoid heat injuries.
i have added a double sided scotch tape to stick a wifi usb adapter.
thingiverse
free
slim Raspberry Pi B case by Jooxoe3i
...the (old) raspberry pi b (rev 2, the one with mounting holes!)
designed to be dual-color-printable on a single-color reprap :-)
grabcad
free
3D Printer with Raspberry Pi module
... check out the raspberry pi module for stl files and more details here: https://grabcad.com/library/raspberry-pi-3-modular-case-1
Pavel569
thingiverse
free
Stratego by pavel569
... ikea or so 2.5mm thick for the board and blocking wall. glued some old aviation maps i had in hand on top to make it look nicer.
thingiverse
free
Verifone VX520 Wall Mount by pavel569
...pavel569
thingiverse
i was forced to replace my old terminal for new, more secure one and didn't have the wall mount for it.
thingiverse
free
3M Applicator plunger for 37ml epoxy by pavel569
...e
bought small (37ml/1.25oz) epoxy and 50ml applicator just to find out it doesn't fit so i have designed a smaller plunger.
thingiverse
free
Game board for Ludo or similar games by pavel569
... of people or a size of your table. you can combine as many of the boards as needed and create a unique game path for your needs.
thingiverse
free
VW Spare Tire Holder by pavel569
...e bolt head. the new one i've designed is more beefy and sturdy. the current bolt is just pressed in the new housing lightly.
thingiverse
free
Bee hive (Vosi hnizda) by pavel569
...xtend the inner halves and release the cookie.
recipe here: http://www.food.com/recipe/vosi-hnizda-czech-christmas-sweets-106578
thingiverse
free
Mk8 Fan Shroud Adjustable by pavel569
...terial. i had to modify it to be able to change the angle of air flow. the nozzle can move now about 25 degrees. it is tight fit.
thingiverse
free
Clamping system for MPCNC or similar by pavel569
...n reaching 7mm i pause and insert steel nut and continue printing.
nut 2 has hole through for inserting steel nut after printing.
thingiverse
free
Wire Storage & Organizer by pavel569
...les through the center for wire end to lock it for winding.
the pipes are 1/2" pvc, threaded rod for wire winder is 5/16-18.
thingiverse
free
Mission San Buenaventura Model Stuff by pavel569
...he model - church height floor to tip of the roof about 3.75", length of the basilica about 16". adjust for your needs.
Stratux
thingiverse
free
Stratux Box by Jack_Albright
...stratux box by jack_albright
thingiverse
stratux box
thingiverse
free
Stratux Case by JohanEikelenboom
...pi 3, standard dvb-t receiver and a waas capable gps.
the main goal was to create a stratux case without external antenna's.
thingiverse
free
Stratux Slim holder by wesalbert
...der either way. in case you have a smooth dash.
stratux slim streched can be found here:http://www.thingiverse.com/thing:1646514
thingiverse
free
Stratux softrf case
...:
stratux
softrf t-motion
softrf skyview ez
usb to serial converter
usb a board
usb micro board
capacitor 1000uf 6,3v
div. cables
thingiverse
free
Stratux Offset Mount by JSACbuilder
...=1623783533&sr=8-3
printing at 0.15mm steps provides excellent detail. hole size and spacing allow printing without supports.
thingiverse
free
Stratux Display 3,7inch waveshare by Mofaheiti
...chose high qualitiy usb cabels, this is the most problem if it doesn't work.
you can install it in the panel of your aircraft
thingiverse
free
Stratux VK172 Shield by wesalbert
...ed the the stratux project.
cover with copper tape
please keep in mind, with this shield, you may need to relocate the antennas.
thingiverse
free
Stratux holder by phiatt
...ns for the micro-usb on the side.
the design file for 123d is available also for those who wish to modify it to suit their needs.
thingiverse
free
Stratux T-Beam Case Skyview by Mofaheiti
...for hard wired, permanently installed unites in your aircraft or light aircraft
edit 03.01.2020 - resistor 43ohm to the audio out
thingiverse
free
Clip for Stratux Case with Fan by Al_H
...urtain rod in the back seat of a mooney or other aircraft with 1/4" curtain rods but will clip onto bags, seat pockets, etc.
Slim
3ddd
$1
Кровать Jupiter slim
...кровать jupiter slim
3ddd
jupiter slim
кровать jupiter slim
design_connected
$10
Slim Chair
...slim chair
designconnected
ligne roset slim chair computer generated 3d model.
3ddd
$1
Minotti Andersen Slim
...minotti , andersen , slim
minotti andersen slim
3ddd
$1
Bottoni Slim
... кресло из коллекции moooi.
oдноместный,плотность пены несколько на фанерной раме, ноги из нержавеющей стали.
размеры: 62x76x86cm
3ddd
$1
Slim Sofa
... slim , arbel
om website: beltafrajumar.com
designer: arbel
formats: 3ds, c4d, fbx, obj
3ddd
free
Складной стол SLIM
...кладной , стол
складной стол для переговоров slim.
размеры соблюдены, текстуры в архиве
3ddd
$1
Slim - Dema
...slim - dema
3ddd
dema
3ddd
free
Luce Verde Slim
... verde , slim
luce verde slim
ø 1300 h 45 mm
lumen led 6500
kg 35
artikel 790.69.01.00
turbosquid
$29
FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Modular
3ddd
$1
MODULAR
...modular
3ddd
modular , врезной свет
modular потолочные светильники
3ddd
$1
Modular Spock
...modular spock
3ddd
modular
modular spock
3ddd
$1
MODULAR / Spock
...modular / spock
3ddd
modular
modular/spock
design_connected
$7
Modular
...modular
designconnected
emmemobili modular shelves and storage computer generated 3d model. designed by ferruccio laviani.
3ddd
$1
Modular spock
...modular spock
3ddd
modular
spock wall led
turbosquid
$25
Modular sofa Angelo Cappellini Modular
...a angelo cappellini modular for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1570923)
turbosquid
$15
Modular sofa Angelo Cappellini Modular
...a angelo cappellini modular for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1570304)
3ddd
$1
Modular 2FLAT2C
...modular 2flat2c
3ddd
modular
modularhttp://www.supermodular.com/
3d_export
free
Modular walls
...modular walls
3dexport
modular walls for playing without materials and textures
3ddd
$1
Modular / Lighting Juliette
...modular / lighting juliette
3ddd
modular
modular lighting juliette
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.