Straight Tube Wheelchair Clamp by ezra_reynolds

Last crawled date: 2 years, 12 months ago

This clamp is designed for wheelchairs such as the Quickie Ti which are made from 1" tubing. The clamp is designed to attach to straight tubing, dowels, etc. The clamp (in two parts), once assembled, will position an eyebolt (or other threaded fastener) at a specific location. This can make it easier to transport items (such as a bag), act as a tool holder, etc.
This model uses the following hardware:
3/8" - 4" Eyebolt
3/8" - hex nut
(4) 1/4"-20 - 1.5" Bolts
(4) 1/4"-20 - Hex Nuts or Hex Stop Nuts
(4) 1/4"-20 - flat washers
Foam rubber shelf liner is wrapped around the tube to prevent scuffing and to increase the grip on the clamp.
This should only be used for light duty loads - it should NOT be used as a wheelchair tie-down in a vehicle.