Thingiverse
Starmax and Freewing F-5 EDF accessories and spare parts by tahustvedt
by Thingiverse
Last crawled date: 3 years, 1 month ago
Update: I changed Trunnion02 and Arm to make the operation better. Also, Trunnion02 and Rectractbases have integrated support blocks that are easy to remove after printing.
Here are all my scale accessories and spare part files I made for my Starmax F-5. The Freewing F-5 is the same size so some parts should work there too.
My tricked out Starmax F-5: https://youtu.be/BH9PzaeX_T8
Retractbase01.STL - The mounting base for the retracts.
Retractbase02.STL - Mounting base for the main retracts with extra large surface area to spread the load of landing and prevent digging into the wing.
Trunnion02.STL - The rotating trunnion in the retracts. Use an M4 grub screw to secure the leg. Use 1,5 mm to 1,6 mm (1/16") wire through it.
Arm.STL - Actuation arm for the retract. Use 1,5 mm to 1,6 mm (1/16") wire through it.
Fork01.STL - Semi-ish scale front wheel fork.
Impeller12.STL - 12 blade fan which uses the stock shaft adapter.
Impeller13.STL - 12 blade fan which mounts directly onto the motor shaft. Use 3x6 to 310 10mm grub screws to secure it to the shaft.
Cone01.STL - Spinner for Impeller12.STL.
Fanhousing01.STL - Replacement fan housing. Reduced noise over the stock housing.
Wirecover01.STL - Spare cover for the wires under the belly of the plane.
Radiocover01.STL - Cover for the receiver compartment.
Batteryclip01.STL - Latch for the battery hatch.
Tailplatform01.STL - The flat part on top of the vertical stabilizer (google for images of the F-5 tail).
Wingtip01.STL - Wingtip weapon hard point.
Sidewinder01.STL - Sidewinder missile for the wingtips.
Tiptank01.STL - Tip tanks. The slot in one side indicates where to mount to the wing. Cut the wing or tank to fit like on the full size.
Required hardware through my affiliate links:
-Grub screws: https://www.banggood.com/240pcs-M3-M8-Carbon-Steel-Socket-Screw-Assortment-Allen-Head-Hex-Socket-Set-Grub-Screw-Box-Kit-p-1144528.html?p=HD240528697332015103
-1,6 mm Piano wire: https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FPiano-Music-Wire-Replacement-of-Broken-Strings-Diameter-0-3-to-2mm%2F282554730171%3Fhash%3Ditem41c99306bb%3Am%3AmBJZXBIQur3cTm_DZrYvBew
-Countersunk M3x8 screws: https://www.banggood.com/Suleve-M3ASH4-10pcs-M3-Hex-Countersunk-Flat-Head-Screws-Alloy-Steel-Titanium-Plated-12_9-Grade-p-1216275.html?p=HD240528697332015103
Here are all my scale accessories and spare part files I made for my Starmax F-5. The Freewing F-5 is the same size so some parts should work there too.
My tricked out Starmax F-5: https://youtu.be/BH9PzaeX_T8
Retractbase01.STL - The mounting base for the retracts.
Retractbase02.STL - Mounting base for the main retracts with extra large surface area to spread the load of landing and prevent digging into the wing.
Trunnion02.STL - The rotating trunnion in the retracts. Use an M4 grub screw to secure the leg. Use 1,5 mm to 1,6 mm (1/16") wire through it.
Arm.STL - Actuation arm for the retract. Use 1,5 mm to 1,6 mm (1/16") wire through it.
Fork01.STL - Semi-ish scale front wheel fork.
Impeller12.STL - 12 blade fan which uses the stock shaft adapter.
Impeller13.STL - 12 blade fan which mounts directly onto the motor shaft. Use 3x6 to 310 10mm grub screws to secure it to the shaft.
Cone01.STL - Spinner for Impeller12.STL.
Fanhousing01.STL - Replacement fan housing. Reduced noise over the stock housing.
Wirecover01.STL - Spare cover for the wires under the belly of the plane.
Radiocover01.STL - Cover for the receiver compartment.
Batteryclip01.STL - Latch for the battery hatch.
Tailplatform01.STL - The flat part on top of the vertical stabilizer (google for images of the F-5 tail).
Wingtip01.STL - Wingtip weapon hard point.
Sidewinder01.STL - Sidewinder missile for the wingtips.
Tiptank01.STL - Tip tanks. The slot in one side indicates where to mount to the wing. Cut the wing or tank to fit like on the full size.
Required hardware through my affiliate links:
-Grub screws: https://www.banggood.com/240pcs-M3-M8-Carbon-Steel-Socket-Screw-Assortment-Allen-Head-Hex-Socket-Set-Grub-Screw-Box-Kit-p-1144528.html?p=HD240528697332015103
-1,6 mm Piano wire: https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575353675&campid=5338226872&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FPiano-Music-Wire-Replacement-of-Broken-Strings-Diameter-0-3-to-2mm%2F282554730171%3Fhash%3Ditem41c99306bb%3Am%3AmBJZXBIQur3cTm_DZrYvBew
-Countersunk M3x8 screws: https://www.banggood.com/Suleve-M3ASH4-10pcs-M3-Hex-Countersunk-Flat-Head-Screws-Alloy-Steel-Titanium-Plated-12_9-Grade-p-1216275.html?p=HD240528697332015103
Similar models
thingiverse
free
Mini retract unit for RC planes by tahustvedt
... https://www.banggood.com/towerpro-sg90-mini-gear-micro-servo-9g-for-rc-airplane-helicopter-p-1009914.html?p=hd240528697332015103
cults
free
70mm 12-blade EDF fan. Fits Starmax F-5 EDF.
...ller12 is the 12 blade fan.
cone01 is the cone that goes in front of the fan.
cone02 is a cone for the back of the motor housing.
thingiverse
free
70mm 12-blade EDF fan. Fits Starmax F-5 EDF. by tahustvedt
...the noise as it has five stators to avoid being in phase with the fan, and the stators are moved back a few mm away from the fan.
thingiverse
free
Freewing mechanical retract by tahustvedt
...n place, and make sure you file a flat spot on the strut to prevent rotating. assemble the retract housings usin #0 or #1 screws.
cults
free
Fan guard with feet for 120mm fan.
...d.com/220v-12cm-solder-absorber-fan-for-soldering-iron-ktv-cabinet-p-1106793.html?p=hd240528697332015103&cur_warehouse=cn
thingiverse
free
Fan guard with feet for 120mm fan. by tahustvedt
...ggood.com/220v-12cm-solder-absorber-fan-for-soldering-iron-ktv-cabinet-p-1106793.html?p=hd240528697332015103&cur_warehouse=cn
thingiverse
free
Freewing F-16 Pylon Mounting Plate by ShadowVFX
...just the z axis +/- 5% to get the rail to fit snug on the wingtip pylon. i print this without supports and it prints good for me.
thingiverse
free
Heavy duty retract unit for RC planes by tahustvedt
...3am%3am0mi67rajku5lrph1l3hc-g
-retract servo: https://hobbyking.com/en_us/bms-136mg-retract-servo-metal-gear-6-1kg-31sec-34g.html
cults
free
Mammut - Giant printer.
...chment:
https://www.banggood.com/10pcs-ac-250v-15a-v-156-1c25-spdt-roller-lever-micro-switch-p-944613.html?p=hd240528697332015103
thingiverse
free
Brushed motor iron man (foldable too) by Iwanestem
...l?rmmds=search&cur_warehouse=cn
for arm i use 5mm carbon square:
[wl-v262-17] rc quadcopter spare parts carbon shaft
thankyou
Starmax
thingiverse
free
Starmax Bomber (STARCOM) by lypstudios
...rendition of starmax bomber from starcom series.
cad model can be found here:https://grabcad.com/library/starmax-bomber-starcom-1
thingiverse
free
He 162 nose repair for starmax by Metalguy
...he 162 nose repair for starmax by metalguy
thingiverse
this nose will replace the damaged nose on your crashed starmax he-162!
thingiverse
free
Starcom Starmax Bomber Upper Cannons
...tarcom starmax bomber upper cannons
thingiverse
better slice it in half.
i didn't create the bottom holes. they are useless.
thingiverse
free
70mm 12-blade EDF fan. Fits Starmax F-5 EDF. by tahustvedt
...the noise as it has five stators to avoid being in phase with the fan, and the stators are moved back a few mm away from the fan.
thingiverse
free
He-162 by Metalguy
...by metalguy thingiverse this is a scan of a starmax he-162. i will be adding more files to this...
thingiverse
free
Scale AIM-9 Sidewinder missile by tahustvedt
...missile. it is in 1:12-ish scale to fit the starmax f-5 rc plane. you can scale it to whatever...
thingiverse
free
Hobbyking / Starmax Piper J3 Cub 1400mm Replacement Parts by carbonbased
...r" and "steering holder"
re-uploaded "ski tail" with the correct orientation for printing (on its side).
thingiverse
free
Big shuttle by all_metric_all_the_time
...by all_metric_all_the_time thingiverse the big shuttle based on a starmax from starcom. the front hatch needs to be shortened...
thingiverse
free
Part by a Compact Shield by shivinteger
...commons - attribution [10] thing title : hobbyking / starmax piper j3 cub 1400mm replacement parts [10] thing url...
Tahustvedt
thingiverse
free
Hextronix HXT900 servo by tahustvedt
... hxt900 servo by tahustvedt
thingiverse
accurate model of a hextronix hxt900 servo. made from measurements form an actual servo.
thingiverse
free
540 AND 550 MOTORS. by tahustvedt
...e
540 and 550 motor models to help with design work. the backplate timing isn't right, but all dimensions are very accurate.
thingiverse
free
RC airplane wheel chocks. by tahustvedt
... chocks. by tahustvedt
thingiverse
wheel chocks for rc planes. these fit 114 mm/4,5" wheels. scale up or down as necessary.
thingiverse
free
Lynx Helicopter cookie cutters by tahustvedt
...edt
thingiverse
cookie cutters in the shape of the rnoaf westland lynx mk. 86 helicopter. 01 is 21 cm long and 02 is 28 cm long.
thingiverse
free
Wing for Schumacher CAT XLS by tahustvedt
...le wing for the schumacher cat xls and other vintage cat's. print solid for strength.
catwing02 has integrated mounting lugs.
thingiverse
free
Hitec HS-65HB Mighty Feather servo by tahustvedt
...ghty feather servo by tahustvedt
thingiverse
accurate model of a hitec hs-65hb servo. modeled from measurements of a real servo.
thingiverse
free
Gary the pilot. by tahustvedt
...your slicer to achieve the height you need. i didn't use any support between the head and headset arch and it came out great.
thingiverse
free
Hitec HS-225MG Mighty Mini servo by tahustvedt
...i servo by tahustvedt
thingiverse
an accurate model of the hitec hs-225mg servo modeled using measurements from an actual servo.
thingiverse
free
Skis for RC planes by tahustvedt
...he curved underside with thick ca and then glue the keels. use a spring, rubber band or rubber bumper to hold it level in flight.
thingiverse
free
Wanhao Duplicator i3 fan mount spacers by tahustvedt
...f fans which are mounted to the original mounting bracket on the wanhao duplicator i3 printer.
the spacers are 3mm and 1mm tall.
Freewing
thingiverse
free
Freewing pylon by fredmdbud
...freewing pylon by fredmdbud
thingiverse
basic freewing pylon (designed specifically for the mig-29)
thingiverse
free
Freewing Mirage 2000 Upgrades
...freewing mirage 2000 upgrades
thingiverse
this is not my design but a free download from freewing rc planes.
thingiverse
free
Freewing Avanti Jet stand by eichi1970
...freewing avanti jet stand by eichi1970
thingiverse
stand for freewing avanti jet
thingiverse
free
TUYERE MIRAGE 2000 FREEWING by Fan77
...tuyere mirage 2000 freewing by fan77
thingiverse
tuyère pour mirage 2000 freewing
thingiverse
free
Freewing MiG-29 Hubcaps by yann281187
...freewing mig-29 hubcaps by yann281187
thingiverse
freewing mig-29 hubcaps front and rear
thingiverse
free
Freewing Venom Main Gear Door by ReedInSpace
...freewing venom main gear door by reedinspace
thingiverse
replacement doors for the freewing venom
thingiverse
free
Freewing Mounting Attachments by ShadowVFX
...6110916).
i also included some slimmed down versions i use and also a rail-style attachment that works better in some instances.
thingiverse
free
Freewing AL37 Inmarsat Antenna by Neo450sxs
...ewing al37 inmarsat antenna by neo450sxs
thingiverse
inmarsat antenna for freewing al37
it's a typical detail of the 737-max
thingiverse
free
Freewing Yak 130 70mm Bugfahrwerksabdeckung by rucky2511
...freewing yak 130 70mm bugfahrwerksabdeckung by rucky2511
thingiverse
freewing yak 130 70mm ersatzteil
thingiverse
free
MK84 2000LB for Freewing F-4 by apmech1
...mk84 2000lb for freewing f-4 by apmech1
thingiverse
mk84 2000lb for freewing f-4
Edf
turbosquid
$39
EDF Nightingale
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
EDF Defender
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
EDF fleet Complete
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Zingy EDF energy blob
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
EDF Orbital Defence Platform Space Based weapon System
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$6
Company car 3D Model
...car 3d model 3dexport travel company car post ups edf vialis carrier company car 3d model pio33d 67443...
3d_export
$6
huawei p-smart z whit hidden camera
...preview images.<br>file formats:<br>.wire autodesk alias, with animation of the camera<br>.edf for icem<br>.step (multiformat)<br>.iges (multiformat)<br>.catpart (multiformat for catia)<br>.bip for render...
3dfindit
free
EDF
...edf
3dfind.it
catalog: rcm
thingiverse
free
edf motor by arinc
...edf motor by arinc
thingiverse
it is printable edf fan
thingiverse
free
Quad with edf by bobsito
...quad with edf by bobsito
thingiverse
just for fun make a model of quadcopter on edf turbine
Spare
3d_export
$10
spare part for massager
...spare part for massager
3dexport
spare part for bliss deluxe foot and ankle massager
turbosquid
$19
E-Z Spare Tire Crarrier
...y free 3d model e-z spare tire crarrier for download as blend on turbosquid: 3d models for games, architecture, videos. (1638682)
3d_export
$14
spare parts
... feel free to contact me. portfolio link: https://www.artstation.com/artwork/3dxg32 thanks & regards, artist swastika bhadury
3d_export
$5
roof mechanism upper door sunroof outward spare part
...roof mechanism upper door sunroof outward spare part
3dexport
roof mechanism, upper door, sunroof outward spare part
turbosquid
$2
Replacement RC Car Shock Proof Plank SJ11 Accessory Spare Parts 15-SJ11 for GPTOYS S911 S912 And Others
...1 for gptoys s911 s912 and others for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1193732)
3d_export
free
dtr
...dtr 3dexport model of some spare ...
3d_export
$19
cfb16 - spare part for jcb skid steer loader
... in this model, please do not hesitate to contact us, we are looking forward to continuously dealing with you.<br>markos 3d
3d_export
$19
tg84 - spare part for jcb skid steer loader
... in this model, please do not hesitate to contact us, we are looking forward to continuously dealing with you.<br>markos 3d
3d_export
$19
rt3000 - spare part for jcb skid steer loader
... in this model, please do not hesitate to contact us, we are looking forward to continuously dealing with you.<br>markos 3d
3d_export
$19
log fork - spare part for jcb skid steer loader
... in this model, please do not hesitate to contact us, we are looking forward to continuously dealing with you.<br>markos 3d
Accessories
3ddd
$1
accessories
...accessories
3ddd
чаша
accessories
3ddd
$1
accessories
...accessories
3ddd
статуэтка
accessories
3ddd
$1
accessories
...accessories
3ddd
статуэтка
accessories
3ddd
$1
accessories
...accessories
3ddd
статуэтка
accessories
archibase_planet
free
Accessories
...accessories
archibase planet
fireplace accessories
accessories - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessories
...accessories
archibase planet
fireplace accessories
accessories - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessory
...accessory archibase planet art accessories design creative accessory f1137 - 3d model for interior...
archibase_planet
free
Accessories
...accessories
archibase planet
kitchen ware kitchen accessories
accessories - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessories
...accessories
archibase planet
poker fireplace accessory
accessories 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Accessories
...essories
archibase planet
kitchen accessories pots and pans cooking battery
accessories - 3d model for interior 3d visualization.
F
3ddd
$1
Торшер Ray F. Ray F. Италия
...торшер ray f. ray f. италия
3ddd
flos
торшер ray f. ray f. италия 1280х360
turbosquid
$100
F-16 F block 62
...oyalty free 3d model f-16 f for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1310086)
3d_export
free
f-35
...f-35
3dexport
us fighter f-35
3d_export
$5
f 150
...f 150
3dexport
f 150 formats max 3ds obj stl
3d_export
$60
F-600
...f-600
3dexport
f600 fire truck, f600 truck f-600 of 1968
design_connected
$13
Tatou F
...tatou f
designconnected
tatou f computer generated 3d model. designed by urquiola, patricia.
design_connected
$13
Luxmaster F
...luxmaster f
designconnected
luxmaster f computer generated 3d model. designed by morrison, jasper.
design_connected
$10
Tab F
...tab f
designconnected
tab f computer generated 3d model. designed by osgerby , jay.
turbosquid
$30
F-4 and F-35 egg plane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$29
Extrasoft F
...extrasoft f
designconnected
living divani extrasoft f computer generated 3d model. designed by lissoni, piero.
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.
Parts
3d_export
$5
Parts
...parts
3dexport
parts
3d_export
$5
Part
...part
3dexport
part
3d_export
$5
Part
...part
3dexport
machine part
3d_export
$65
Part
...part
3dexport
simple rendering of the scene file
3d_export
$65
Part
...part
3dexport
simple rendering of the scene file
3d_export
$30
fan part
...fan part
3dexport
this is a part of fan of pedastal
3d_export
$10
machine parts
...machine parts
3dexport
3d part modeling work ,contact for 3d work
turbosquid
$59
Mechanical Part
...id
royalty free 3d model mechanical part for download as c4d on turbosquid: 3d models for games, architecture, videos. (1410833)
turbosquid
$17
Road parts
...bosquid
royalty free 3d model road parts for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1192967)
turbosquid
$9
Cutter Parts
...squid
royalty free 3d model cutter parts for download as stl on turbosquid: 3d models for games, architecture, videos. (1220010)