Thingiverse
Spring-powered 12lb Whitworth rifle mods by Kungaloosh
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a modified carriage to use a 8-32 screw. I have also included some 3D printable thumb screws that will fit an ordinary 8-32 screw. They will need to be tapped with an 8-32 tap. I would also recommend that thread lock or CA glue be used to make sure the thumb screws stay put on the screws.
I also made some reinforcement plates for the spring retainer area of the carriage, these should be glued on with CA glue and may help prevent the print from splitting from the force of the spring. I have not tested them yet but I would only glue them on after the spring and retainer are installed.
I also made some reinforcement plates for the spring retainer area of the carriage, these should be glued on with CA glue and may help prevent the print from splitting from the force of the spring. I have not tested them yet but I would only glue them on after the spring and retainer are installed.
Similar models
thingiverse
free
Bigger thumb wheel caps for 8/32 Hex Bit thumb wheel screws by Chris918
... hammer (recommended).
although it's not necessary, i sealed my screws into the caps, using a handy syringe of abs glue ;)
thingiverse
free
M3 Nyloc thumb wheel by light_seeker
...m3 nyloc thumb wheel by light_seeker
thingiverse
m3 nyloc thumb wheel for printers using m3 screws to retain springs.
thingiverse
free
Wilson 2 X Carriage Bearing Retainer by k_b
...xisting attachment holes. you will need to replace two of the m4 25mm screws with longer m4 30mm screws to install this retainer.
thingiverse
free
Maker Select v2 Thumb Screw lock / stopper by swendingo
... maker select and lock to the aluminum y carriage.
i used this carriage model to fit it:https://www.thingiverse.com/thing:2137047
thingiverse
free
Rubik's Cube by AustinMeck
...hough. you will probably have a few corners that print poorly and you have to redo them. the rest of the pieces were fine though.
thingiverse
free
M4 hex thumb screw by BernardLowe
.... i use them to quickly mount and unmount my raspberry pi from my vesa mounts.
with or without the raspberry pi symbol available.
thingiverse
free
Anet A8 leveling thumb wheels by Kohburn
... i've only used it in place of the wing nut. to eliminate the springs i will have to drill the threads out of the y carriage.
thingiverse
free
3-4 fly Reel by rdsail
...epoxy glue to attach the spool together with the screws.
screw: 97345a185
bearing: 6381k423
washer (2): 7814k11
screws: 92949a110
thingiverse
free
Indicator Holder for Taig Lathe_Mk 2
...10-32 screw and nut and one 8-32 screw and nut. i put a thumb screw cap on the clamping screw to make it that much easier.
enjoy!
thingiverse
free
Synta Shoe For Explore Scientific Handle by Greasydeal
.../4" socket head cap screws (i used 1" length in the pictures)
(2) 8-32 nuts
check out my site at www.dirtyastronomy.com
Kungaloosh
thingiverse
free
Challenge Coin Stand by Kungaloosh
...challenge coin stand by kungaloosh
thingiverse
a challenge coin stand
thingiverse
free
Sponge Bob by Kungaloosh
...osh
thingiverse
this is ggangemi's spongbob model but scaled down a little and broken apart for cleaner and easier printing.
thingiverse
free
Simple Pit Droid Head by Kungaloosh
...simple pit droid head by kungaloosh
thingiverse
this is a simple pit droid head
thingiverse
free
Holoprojector mount by Kungaloosh
...an be assembled with #6 bolts. i also made a new servo plate that should be more compact but i have not tested it's geometry.
thingiverse
free
Pith Helmet by Kungaloosh
... the gocde file can be printed on the mp select mini v2, it has no supports or raft and i have successfully printed it that way.
thingiverse
free
Steeling Wheel for Jungle Cruise Boat by Kungaloosh
...for jungle cruise boat by kungaloosh
thingiverse
steeling wheel for jungle cruise boat. very tiny, print at 0.1313 layer height.
thingiverse
free
Guards Toy Soldier with Bearskin hat by Kungaloosh
...dier to approx 54mm scale and gave him a bearskin hat. integrated tree supports. the scale is approximately 156% of the original.
thingiverse
free
Zeus Goes Fishing by Kungaloosh
...was based on the artemision bronze but had an acanthus leaf and was holding a fishing rod and also had other fishing accessories.
thingiverse
free
Star Trek Commander - Classic Movie Versions by Kungaloosh
...e the starfleet insignia for the commander ranks, wrath of khan era (monster maroon). the lt. commander is the solid bar version.
thingiverse
free
Garden Hose to 3/4 inch Pipe Adaptor by Kungaloosh
...ipe adaptor by kungaloosh
thingiverse
this is an adapter to go from a garden hose connection to a 3/4 inch schedule 40 pvc pipe.
12Lb
thingiverse
free
M-1841 12lb Mountain Howitzer by BiancaW
...m-1841 12lb mountain howitzer by biancaw
thingiverse
us model 1841 mountain howitzer in full scale
thingiverse
free
Spring-powered 12lb Whitworth rifle toy by Fishbreath
...wars.
see the sections below for more information.
(the toy soldiers in the cover photo are from earsling's napoleonics set.)
thingiverse
free
12lb Sumo-Bot Robo Warriors Division 2018 by dz1sfb
...ttps://armattanproductions.com/pages/kit_detail/1644 are prefabricated upper, lower, and inner side panels from 3mm carbon fiber.
3d_sky
$8
Chic Nouveau 6 Light Chandelier
...x 22.5" w x 22.5 "d overall product weight: 12lb max 2015 - 2012 - vray -...
thingiverse
free
Line Tensioner by 13DjjC13
...tensioner. uses a m3 nut and bolt. tested with 12lb fishing line (make sure that it doesn't stretch...
thingiverse
free
3D Printed Modular Kettlebell by 3DimensionMaker
...the first version and has only been tested with 12lb (5.4kg). the model has 3 parts: top, bottom, and...
thingiverse
free
Spool Holder Extra large Stand Alone
...spools . the reason i made this is because 12lb. spools have too much friction . this uses mmu2...
thingiverse
free
Large Spool Holder Wall mount
...spools . the reason i made this is because 12lb. spools have too much friction . this uses mmu2...
thingiverse
free
Replacement Shelf Brackets for BAMFOX floating shelf
...be able to support 20lb, the air purifier is 12lb. i put up the shelf, and i did not...
Whitworth
turbosquid
$32
game cannon whitworth
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF14
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF14
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF14
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF11
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF11
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF11
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF11
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$150
Armstrong Whitworth Meteor NF14
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
game cannon whitworth 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Rifle
3d_ocean
$9
rifle
...rifle
3docean
gun low poly rifle soldier weapon
rifle model max 2013 and obj 1024×1024 texture lowpoly
turbosquid
$30
Rifle
...le
turbosquid
royalty free 3d model rifle for download as ma on turbosquid: 3d models for games, architecture, videos. (1161496)
turbosquid
$1
rifle
...turbosquid
royalty free 3d model rifle for download as blend on turbosquid: 3d models for games, architecture, videos. (1344661)
3d_export
$5
longfire rifle
...longfire rifle
3dexport
longfire rifle
3d_export
free
butt of the rifle
...butt of the rifle
3dexport
butt of the rifle
3d_export
free
repeater rifle
...repeater rifle
3dexport
repeater rifle
3d_export
$15
Rifle v2
...rifle v2
3dexport
assault rifle, designed for the protection and storming of objects. the rifle has a paralytic function.
turbosquid
$20
Rifle
...quid
royalty free 3d model rifle for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1301083)
3d_export
$5
rifle sks
...rifle sks
3dexport
rifle sks simonov
turbosquid
$49
Rifle
...
royalty free 3d model rifle for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1582428)
Mods
design_connected
$13
MOD. 4233 - MOD. 4234 Table Lamp
...mod. 4233 - mod. 4234 table lamp
designconnected
arcahorn mod. 4233 - mod. 4234 table lamp computer generated 3d model.
design_connected
$11
MOD.1095
...mod.1095
designconnected
mod.1095 computer generated 3d model. designed by sarfatti, gino.
3ddd
$1
fireplaces mod Spec
...fireplaces mod spec
3ddd
камин
fireplaces mod spec 180x90x125h
3ddd
free
Flos Mod. 2129
... mod
фабрика: flos
модель: mod. 2129
описание: подвесной светильник, металл, белый, черный.
сайт: www.flos.com
turbosquid
$34
Mod Lamp.c4d
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
MOD A 001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Maars Mod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Mod 70..
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
MOD Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Mod-Lite
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Spring
3d_export
free
spring
...spring
3dexport
spring
3ddd
$1
Spring
... , spring
кресло spring фабрики potocco (италия)
длина 84
ширина 79
высота 100
design_connected
$16
Spring
...spring
designconnected
cappellini spring chairs computer generated 3d model. designed by erwan bouroullec.
3ddd
$1
Еmmemobili Spring
...еmmemobili spring
3ddd
еmmemobili , spring
кресло еmmemobili spring
design_connected
$11
Spring
...spring
designconnected
de padova spring chairs computer generated 3d model. designed by damian williamson.
turbosquid
$5
Spring
...
turbosquid
royalty free 3d model spring for download as skp on turbosquid: 3d models for games, architecture, videos. (1148583)
turbosquid
$1
Spring
...
turbosquid
royalty free 3d model spring for download as fbx on turbosquid: 3d models for games, architecture, videos. (1351471)
3ddd
$1
Еmmemobili Spring
...mobili spring
3ddd
emmemobili , spring
кресло еmmemobili spring, вариант в мягкой обивке
3d_export
$5
Ball spring
...ball spring
3dexport
ball spring
3ddd
$1
Смеситель SPRING
... fir italia , смеситель
смеситель spring, две модели, производитель fir italia!
Powered
turbosquid
$100
power
...ower
turbosquid
royalty free 3d model power for download as on turbosquid: 3d models for games, architecture, videos. (1421990)
3d_export
$5
Power
...power
3dexport
3d_export
$5
power outlets
...power outlets
3dexport
power outlets
3ddd
$1
lion power
...lion power
3ddd
лев , статуя
lion power gold sculpture
3ddd
$1
Sea Power
...
компас , море , часы
часы с компасом sea power
3ddd
free
Meridiani / Power
...power
3ddd
meridiani , круглый
стол power производитель meridiani, диаметр 120,высота 67
3d_export
$5
Power Surge
...power surge
3dexport
the power surge is a all mesh carnival ride to lower in game part count and lag
turbosquid
$8
Airport Ground Power Unit (AXA Power )
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Power Houser
...rbosquid
royalty free 3d model power houser for download as on turbosquid: 3d models for games, architecture, videos. (1333800)
3d_export
$5
power outlet
...power outlet
3dexport
power outlet<br>format file maya 2018, 3d max 2017, obj, fbx