Thingiverse
Spool Dispenser System by dmarkdw1955
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a tote that can hold up to 7 spools of filament. It dispenses the spools to the printer and keeps your filament dry with the desiccant that is in the bottom. You can set the tote above your printer as shown in the picture, or it can be placed beside, below or anywhere so long as your boden tube will reach and have enough slack when your z axis raises. You can save on how much boden tube that you need by using short pieces for the spools that are not being used and swap the longer tube over when you change to another color or type of filament.
What you need to print:
RodHolder_M30 - You should print 2 of these and mount them on each end of the tote to support a 1 inch dowel.
H7Spool_AB - 2 parts. You should print 2 of these to get a total of 4 parts. If your printer can print a 440mm long part then you should instead print the H7Spool_Full stl file.
H7Spool_Full - You should print 2 of these, but only if your printer is capable of printing a 440mm long part.
You will need:
1 inch diameter dowel rod, or something equivalent. A broom handle would probably work well. Cut this to the length of your tote.
A tote, mine is 16.25 inches wide X 23.5 inches deep X 13.5 inches high.
Some bulk desiccant.
14 - PC4-M10 PTFE Quick Fittings
28 - M5 X 8 button head bolts
8 - M5 X 16 button head bolts
36 - M5 Hex Nuts
25 feet or more of boden tube
You could probably get by without using the M5 X 8 button head bolts and just let the PTFE quick fittings hold things up. Of course if you do then you only need to drill holes in your tote for the quick fittings.
You will also need a quick fitting to receive the boden tube before it enters the extruder on your printer. If you have a CR-10 you can print the filament sensor mount that I uploaded, thing:2826970.
What you need to print:
RodHolder_M30 - You should print 2 of these and mount them on each end of the tote to support a 1 inch dowel.
H7Spool_AB - 2 parts. You should print 2 of these to get a total of 4 parts. If your printer can print a 440mm long part then you should instead print the H7Spool_Full stl file.
H7Spool_Full - You should print 2 of these, but only if your printer is capable of printing a 440mm long part.
You will need:
1 inch diameter dowel rod, or something equivalent. A broom handle would probably work well. Cut this to the length of your tote.
A tote, mine is 16.25 inches wide X 23.5 inches deep X 13.5 inches high.
Some bulk desiccant.
14 - PC4-M10 PTFE Quick Fittings
28 - M5 X 8 button head bolts
8 - M5 X 16 button head bolts
36 - M5 Hex Nuts
25 feet or more of boden tube
You could probably get by without using the M5 X 8 button head bolts and just let the PTFE quick fittings hold things up. Of course if you do then you only need to drill holes in your tote for the quick fittings.
You will also need a quick fitting to receive the boden tube before it enters the extruder on your printer. If you have a CR-10 you can print the filament sensor mount that I uploaded, thing:2826970.
Similar models
thingiverse
free
Filament Dry Box - Made from an ammo can box
...s shown.
be sure to add a container of desiccant in your new dry box. i use this to store and print nylon based filaments. enjoy.
thingiverse
free
Filament spool hangar 1 inch wood dowel by Trevre
... of these and span with a 1 inch wood dowel to hang filament rolls above the printer from the wall. should fit most spool sizes.
thingiverse
free
Creality CR-10 filament guide 90° for rear feeding by Jahislove
...not need to remove the screw
you can add a ptfe tube (bowden tube) if you want
**added : heading up guide for spool above printer
thingiverse
free
3D printer filament holder by evil_k
...pper pipe. will need to print two of each of the parts. cut square wooden dowels and pipe to appropriate lengths for your spools.
thingiverse
free
PTFE tube mount to use with filament out sensor by B-Cup
...creativity elf printer when you have a direct drive extruder. it helps get the filament from the stock spool holder to the head.
thingiverse
free
AM8 2040 spool holder with PTFE tubes by Grisword
...art up
cap should be printed flat
you don't need any supports. threads are 45 degrees and should print without any problems.
thingiverse
free
Filament spool holder (1 1/4inch dowel) by 3dpKid
...se to the top of your printer. it is designed to take up minimal plastic but is still sturdy enough to hold all of your filament.
thingiverse
free
BondTech BMG Filament Tube Guide by kendel3d
...ment into your extruder. it will go right down to your geared pulleys every time without even having to touch the quick release.
thingiverse
free
Self-Aligning Spool Holders (FlashForge Creator Pro) by hondahirny
...e both extruders). i've included a sample suggested layout for printing your own version. supports will be required.
enjoy!
thingiverse
free
Delta Filament Guide by iason33
...verse
filament guide for top mounted spools on a delta printer.
you will only need a piece of 4mm ptfe tube to finish the guide.
Dmarkdw1955
thingiverse
free
CR-10S_DTI_Holder_Remix by dmarkdw1955
...p the bridge some or perhaps this could be made to stick out a little more and leave a little gap between the bridge and the fan.
thingiverse
free
CR-10s Filament Sensor by dmarkdw1955
...utube videos. i will be uploading files for that as a separate thing.
update 3-15-18: uploaded file with improved part integrity.
Dispenser
archibase_planet
free
Dispenser
...dispenser
archibase planet
soap dispenser sanitary ware
soap dispenser - 3d model for interior 3d visualization.
archibase_planet
free
Dispenser
...dispenser
archibase planet
toilet paper dispenser sanitary ware
toilet paper dispenser - 3d model for interior 3d visualization.
archibase_planet
free
Dispenser
...hibase planet
dispenser water cooler cooler water
dispenser n040815 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_export
$10
soap dispenser
...soap dispenser
3dexport
soap liquid dispenser for top.
3ddd
$1
soda dispenser
...soda dispenser
3ddd
бар , кафе
soda dispenser
turbosquid
$5
dispenser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$12
Water Dispenser
...dispenser furnishings lowpoly water
this is a water dispenser hot water for tea is winter and summer is cold for souls. have fun!
archive3d
free
Dispenser 3D Model
...aper towel dispenser mediclinics n280116 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Dispenser 3D Model
...ater t6 purifier water dispenser n260216 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Soap dispenser
...ser
3dexport
soap dispenser for your bathroom interior design<br>include:<br>- pbr-materials<br>- 2 dispensers
Spool
3ddd
$1
spool c53301
...spool c53301
3ddd
spool
spool c53301 650х350х145
turbosquid
$3
Cable Spool
...royalty free 3d model cable spool for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1457009)
turbosquid
free
Pallets and Spool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Spool of String
...ol of string pink for download as c4d, 3ds, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1647892)
3ddd
$1
Подвесные светильники Spool
...ye/podvesnoy_svetilnik_spool_d320/ http://www.cosmorelax.ru/catalog/podvesnyye/podvesnoy_svetilnik_spool_d420/
3ddd
free
Spool 001 sofa
...spool 001 sofa
3ddd
roda
roda
collection spool
design rodolfo dordoni
dimensions:
lenght 90 cm
depth 94 cm
height 79 cm
turbosquid
$15
Roda Spool Sofa
...ee 3d model roda spool sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502650)
turbosquid
$95
wire spools 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
spool of TV wire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Simple and Fast Spool Holder
...ree 3d model simple and fast spool holder for download as stl on turbosquid: 3d models for games, architecture, videos. (1548546)
System
archibase_planet
free
System
...m
archibase planet
fire alarm system fire alarm box
security light system - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Spider system
...stem spider glass system
spider system to fix glass stefano galli n050912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Euforia System
...euforia system
3ddd
euforia
euforia system
3d_export
$50
Roof system Truss system 3D Model
...oof system truss system 3d model
3dexport
roof system truss truss stage
roof system truss system 3d model aleksbel 38970 3dexport
3ddd
$1
DVD System
...dvd system
3ddd
dvd , schneider
dvd system
design_connected
free
Seating system
...seating system
designconnected
free 3d model of seating system
3d_export
$5
solar system
...solar system
3dexport
solar system in c4d, with 8k nasa textures
3ddd
$1
Quanta System
...quanta system
3ddd
медицина
quanta system.
лазерное оборудование для медицинских центров
3d_export
$15
solar system
...nd the other the sun, the earth and the moon, the latter has an animation with camera movement included, the files are in spanish
3d_export
$14
missile system
...missile system
3dexport