Spirit Island Board Game replacement box inserts

Last crawled date: 4 years, 3 months ago

This is a set of replacement box inserts for the Spirit Island board game. They are designed to better organize the various bits and pieces and to accommodate sleeved cards.
The design is pretty close to that of the original, with one full-size bottom insert and two half-size top inserts. The top inserts have more and larger wells to fit more of the bits, and the bottom insert has larger wells accommodating sleeved cards (Dragonshield matte clears for the large cards, Fantasy Flight Mini European for the invader deck). There's nto a lot of room to spare vertically with sleeved cards, especially if they are freshly sleeved and still puffy, but they DO fit. The invader board, spirit boards, and scenario cards all stack as they do in the original inserts. Since almost all of the bits that are needed during play fit in one of the top inserts, it's much easier to just keep that on the table during the game and put everything else back in the box.
THESE ARE LARGE PRINTS: 282mm in X/Y!
These just barely fit on my CR-10S. I had to move a couple of clips and make sure everything was well centered to make this work.
The inserts were designed to mimic the geometry of a typical vacuformed insert, so they include draft and are shelled, but I have included solid versions which are easier to print but will be a bit heavier and consume more material. The shelled versions