Thingiverse
Spectrophotometer Retention Device (for X-Rite Chroma4 and Chroma5 meters) by lenknermj
by Thingiverse
Last crawled date: 2 years, 12 months ago
I work in the medical field, where our monitors have to be calibrated regularly. For the majority of them, we have to hold a spectrophotometer against the screen for 10-15 minutes each. As long as I've been doing this, I've been using 2 large, thick elastic bands tied together and hooked onto opposing corners of the monitor to hold this "puck". Being a new 3D printer owner, I decided to try modelling a part to do this for me without the hassle of trying to get elastic bands to stay on monitors with rounded edges. :)
Please note, I have NOT YET PRINTED THIS THING. I plan to do so over the next few days, but wanted to publish it in case anyone had a critique or suggestion for me.
REVISION 1 - Feb 17, 2016
I printed out a set of the legs, and they were too loose - I enlarged the ends of the smallest part of the legs (the T shapes) to be just .2mm smaller than the socket that receives it.
I shortened the overall size of the device by about 2 inches, as it was just TOO big to be practical on the 22" monitors we use them on (the shortest length possible was about 8 inches from top of monitor to center of meter)
I still have yet to print this device in its entirety, so until I do, I'm leaving this listed as a "Thing in progress"
Please note, I have NOT YET PRINTED THIS THING. I plan to do so over the next few days, but wanted to publish it in case anyone had a critique or suggestion for me.
REVISION 1 - Feb 17, 2016
I printed out a set of the legs, and they were too loose - I enlarged the ends of the smallest part of the legs (the T shapes) to be just .2mm smaller than the socket that receives it.
I shortened the overall size of the device by about 2 inches, as it was just TOO big to be practical on the 22" monitors we use them on (the shortest length possible was about 8 inches from top of monitor to center of meter)
I still have yet to print this device in its entirety, so until I do, I'm leaving this listed as a "Thing in progress"
Similar models
thingiverse
free
covid mask mount for glasses by kelico
... at some point so the elastic may not be needed..
this was just a quick fix for me personally.. takes about 20 minutes to print 2
thingiverse
free
Quck Clip for Elastic Band (3/4") by leesirc
...e masks.
i've reduced the foot print and made it wider.
original for 1/8" here:https://www.thingiverse.com/thing:4247485
thingiverse
free
Shrek Xun
... what should we attach them to?
roommate: could you attach it to that flute i was trying to print?
me: i definitely could do that
thingiverse
free
Mosquito by Scintilla
... this up and show me i would be so happy.
i will be making adjustments in a couple days to the legs to make them a bit thicker.
thingiverse
free
Multi-Size Remix of Suraky's Surgical Mask Strap Remix by rivulent
...le but the medium was also perfectly acceptable.
i was able to print 8 smalls, 8 mediums, or 7 larges at a time on my prusa mk3s.
thingiverse
free
Legs for Multi-rotor by justinDavidow
... room for a gopro in the front, and a blast to boot around with!
note: this does take some care to print; see the instructions!
thingiverse
free
Elastic Buckle by Foden7
... is to keep the elastic together on the back of your head
i've printed lots and they hold up extremely well
1/4" elastic
thingiverse
free
Elastic Band (6 mm x 0.84 mm) by BigBertGU
...h face masks and face shields for the covid-19 support efforts. this model will create just under 7 meters of 6mm x 0.84mm band.
thingiverse
free
Yet Another MacBook Stand by jpan
...the whole thing flips. ...
i will try reprint at 1.8. if yours work at 1.8 please let me know
remember to print one leg mirrored
thingiverse
free
Beekeepers Hornet Wasp Trap by langstroth2
... will tell if it works. i've yet to try this design in anger - i've printed several and will try it out this year (2017).
Lenknermj
thingiverse
free
Tool and Card Organizer by lenknermj
...ator clone) printer. fits the allen keys that come with the printer, 8 sd cards, 2 part removal tools, and a pair of tweezers :)
thingiverse
free
Yet Another SD Card Holder by lenknermj
...rds, and i also wanted to be able to remove it and have it stand on it's own. kudos to the original maker on a solid design.
thingiverse
free
K Cup Dispenser by lenknermj
...base model. use whatever glue is recommended for the material you're printing with (i use hotglue for most everything...lol)
thingiverse
free
Z-Axis offset spacer for FlashForge Creator Dual/Monoprice 11614 - 1/8" glass by lenknermj
...me 1/8" borosilicate glass, and crafted this simply little spacer to offset the z- axis home switch to accomodate the glass.
thingiverse
free
Glass bed corner clips by lenknermj
...m may also have to be modified if your bed isn't approx 8mm thick from the top of the bed to the bottom of the circuit board.
thingiverse
free
Heavy scale X3D Ultibot by shivinteger
...[11] thing url : http://www.thingiverse.com/thing:1335783 [11] thing author : lenknermj [11] thing licence : creative commons - attribution [+]...
Spectrophotometer
thingiverse
free
spectrophotometer cuvette adapter by pancala
...spectrophotometer cuvette adapter by pancala
thingiverse
for unico 1100rs spectrophotometer
thingiverse
free
Microscope Mount for a Mini Spectrophotometer by DocJames
...le florescent emission and transmission data collection.
designed in openscad based on spec sheets at:http://www.oceanoptics.com/
thingiverse
free
Spectrophotometer cubettes stand by nachtwolf_arg
...s stand by nachtwolf_arg
thingiverse
stand for spectroscopy, 1.3 mm side holes.
print with 15% infill (i suggest giroid).
enjoy!
thingiverse
free
DIY spectrophotometer case by sh4shayan
...ple lightproof box which fits standard cuvettes with a space for led light source and a detector similar to a silicon photodiode.
thingiverse
free
Spectrophotometer cuvette cap by nachtwolf_arg
...our sides, 0.461.2 mm
it's a hollow piece, so you should use 100% infill.
you can print up to 169 per ender 3 printing area.
thingiverse
free
OtterVIS LGL spectrophotometer by esbenrossel
...te, but expect to pay something like this:
optics: 2x 10$, ccd: 10$, mcu: 15$, grating: 3$, a few $$ for misc. parts.
total: ~60$
thingiverse
free
Customizable spectrophotometer cuvette rack by jwchew
..., 2x3, or 2x12).
if your printer is capable of bridging a ~1 cm gap without supports, then no supports are needed for this print.
thingiverse
free
DIY Spectrophotometer by jakelmer
...eces (led holder, cuvette/photoresistor holder, and a cuvette removal tool), which fully conceals the cuvette from ambient light.
thingiverse
free
Cuvette holder by Seosamh
...cuvette holder. cuvette dimensions: 50mm we got a new spectrophotometer but it wouldn't hold the 50mm. cuvettes we had,...
thingiverse
free
2 mm cuvette adapter
...simple 2 mm cuvette adapter for general use in spectrophotometer. ...
Rite
thingiverse
free
Fan Bracket - Print-Rite DIY by 1959
...fan bracket - print-rite diy by 1959
thingiverse
print-rite diy fan bracket for 50mm fan.
thingiverse
free
Rite-Track-compatible Drawer Hardware by cfinke
...-compatible drawer hardware by cfinke
thingiverse
a suitable replacement for the rite track brand kenlin socket and case runner.
thingiverse
free
Chain mounts for Print-Rite DIY by onmeow
...diy by onmeow
thingiverse
mount that fit the carriage for print-rite diy by shawdreamerhttps://www.thingiverse.com/thing:1755550
thingiverse
free
Pso-Rite Modular by Deeds_ZA
.... designed according to official product dimensions.
base = 10,7" x 5"
peak height = 5,3"
peak to peak = 6,3"
thingiverse
free
Print Rite Tool Holder by Fab_ster
... from hobbyking
holds the z axis test card and the three most common allen keys.
i will release the plans for the printer stand.
thingiverse
free
Print-rite Y-axis blocks by shawdreamer
...print-rite y-axis blocks by shawdreamer
thingiverse
y-axis lightened replacements
thingiverse
free
Print-Rite DIY LCD Screen Case by Reece
...ed 3 of the spacers.
you will need 4 m4 8mm countersunk screws, 4 m3 15mm screws and 4 rubber feet for the bottom to help it grip
thingiverse
free
Mounting brackets for the Print-Rite 3D Printer by Fab_ster
... needed a way to screw down the printer without modifying it.
plans for the printer standhttp://www.thingiverse.com/thing:1216052
thingiverse
free
Pen holder for Moleskine notebook for Rite In The Rain pen by subjektiv_dk
...n holder for moleskine notebook and rite in the rain black metal clicker pen.http://www.riteintherain.com/black-metal-clicker-pen
thingiverse
free
Rite-TrakII Drawer Slide by ntc490
...imilar things:http://www.thingiverse.com/thing:39023http://www.thingiverse.com/thing:56081http://www.thingiverse.com/thing:101289
Retention
thingiverse
free
Arrow Retention Spring for Mainhunter Mamba by Isusovich
...arrow retention spring for mainhunter mamba by isusovich
thingiverse
arrow retention spring
thingiverse
free
SO239 cap with retention by duglia
...file for size.
added a groove for a grommet and a small pass trough for a retention cord.
as usual, your size and scale may vary.
thingiverse
free
Casement window screen retention clip by Vartech_Dynamics
...erse
this retention clip is for casement window screens. this allows the screen to be inserted snuggly into the window opening.
thingiverse
free
Cisco 7821 Phone Retention Tab by aguzinski
...on tab by aguzinski
thingiverse
replacement retention tab for the cisco 7821 phone. holds phone while base is mounted to a wall.
thingiverse
free
Mag Pouch Bungee Side Retention by qblackfoxp
...etention.
i would use petg or abs, but i'm sure pla could work but wouldn't hold up long for the high retention version.
thingiverse
free
Tesla Subwoofer to SoundQubed Retention Bracket by Naonak
...sn't really necessary, as the subwoofer is a pretty snug fit on its own, but you can always add this is some extra retention.
thingiverse
free
Powerpole Retention Clip for 1327 Housing
...5-45 amps), commonly used in frc. there are locking pins that slide into the holes formed by 2 or more joined powerpole housings.
thingiverse
free
Cisco 8841 Retention Tab by Brizzle
...lost the retention tab for the handset and cisco does not list the part for replacement, so naturally i designed and printed one.
thingiverse
free
Bed Thumbwheel with M3 retention by BoothyBoothy
...bed thumbwheel with m3 retention by boothyboothy
thingiverse
yet another thumb wheel for a m3 bolt.
thingiverse
free
UK Wheelie Bin Lid Retention Pin by MonkeyBear
...rse
a replacement lid retention pin for uk wheelie bins.
tested on the model shown in the pictures, but should work with others.
Meters
thingiverse
free
radius meter
...radius meter
thingiverse
radius meter
thingiverse
free
spaghetti meter
...spaghetti meter
thingiverse
.
thingiverse
free
Parking Meter
...hingiverse
old style parking meter
to see these models and more in a finished diorama scene please visit..
www.madhatter.cloud
.
thingiverse
free
Fun Meter Base
...fun meter base
thingiverse
fun meter base
thingiverse
free
Flow meter by emanuelcracco
...flow meter by emanuelcracco
thingiverse
a simple flow meter
thingiverse
free
Capacitor Meter by bobtidey
...ure for an attiny capacitor meter.
construction details at instructables
https://www.instructables.com/attiny85-capacitor-meter/
thingiverse
free
Tolerance Meter by presssa
...tolerance meter by presssa
thingiverse
tolerance meter for improve 3d printing.
thingiverse
free
Rain Meter by ubuntullmx
...rain meter by ubuntullmx
thingiverse
it's a rain meter for human measure
thingiverse
free
Angle meter by Imprenta3D
...angle meter by imprenta3d
thingiverse
very simple angle meter; hope somebody enjoy it :-)
thingiverse
free
Case for multi-meter by Poupediepapedie
...papedie
thingiverse
this is a case for my multi-meter
the case fits a meter (approx. 7cm/15,5cm) and its cables (+ a temp meter)
Device
thingiverse
free
The Device by eanator
...-printing in the world of tomorrow. behold the device! countless applications and innovations await you. the device calls to you.
thingiverse
free
Flyway Device by gesheit1325
...flyway device by gesheit1325
thingiverse
that is my device
thingiverse
free
Flyway Device by gesheit1325
...flyway device by gesheit1325
thingiverse
this is flyway device
thingiverse
free
Centering device by fransni
...centering device by fransni
thingiverse
this is an centering device.
thingiverse
free
device holder by Qwifan
...device holder by qwifan
thingiverse
device holder is awesomely made
thingiverse
free
drilling device by vladac
...drilling device by vladac
thingiverse
drilling device (mock-up)
thingiverse
free
Device Stand by JeremySant
...device stand by jeremysant
thingiverse
a very rough idea for a device stand.
thingiverse
free
Device Holder by PoniButtz
...device holder by ponibuttz
thingiverse
put your device on the object and watch a movie.
thingiverse
free
Muzzle Device
...zle device with 1/2"-28 threads. only use on low pressure applications such as airsoft or pellet guns. use at your own risk.
thingiverse
free
Colostomy Device by Phelps3D
... to make something that is cheaper and a temporary stop-gap type device as sometimes my cycle of ordering the devices has issues.