Thingiverse
Spacer 1 by ock10
by Thingiverse
Last crawled date: 3 years ago
Torque transferring spacer to reinforce StoraBrollan's Logitech Momo Force hub replacement. It will allow the steering angle limiter to remain aligned if the hub fails between the force feedback gear and steering wheel, to avoid over-rotation damage to the wheel angle potentiometer.
Installs by replacing the m3x20mm screws with longer screws, which seat against a 39mm diameter metal washer that fits into the large end of the hub. The spacer has a 2mm gap to the washer to allow compression force on the hub.
The washer in the photos has notches to fit in the original hub for repair or reinforcement. For the original hub a larger diameter prototype spacer was made by cementing 3/4" PVC pipe into 1" PVC pipe to make a shorter 18mm spacer, a 1"x1/2" PVC bushing could also be used, or the 3D file could be modified to make this.
Installs by replacing the m3x20mm screws with longer screws, which seat against a 39mm diameter metal washer that fits into the large end of the hub. The spacer has a 2mm gap to the washer to allow compression force on the hub.
The washer in the photos has notches to fit in the original hub for repair or reinforcement. For the original hub a larger diameter prototype spacer was made by cementing 3/4" PVC pipe into 1" PVC pipe to make a shorter 18mm spacer, a 1"x1/2" PVC bushing could also be used, or the 3D file could be modified to make this.
Similar models
thingiverse
free
Geodesic Dome 3V Connector for 1" PVC pipe by Simhopp
...0 pipe.
for 3/4" pipe, re-scale to 77.5% (not 75%)
for 1/2" pipe, re-scale to 57% (not 50%)
need to lay flat and print.
thingiverse
free
Space Frame connector for PVC 1" pipe by Simhopp
... fit any size pipe theoretically.
for 3/4" pipe, re-scale to 77.5% (not 75%)
for 1/2" pipe, re-scale to 57% (not 50%)
thingiverse
free
Makerbot Filament Spool Hub for 1/2" PVC by rleblanc
...ingiverse
designed to fit makerbot filament spools, you will need to make two of these. it slides perfectly over a 1/2 pvc pipe.
grabcad
free
Wltoys A959b rear wheel hub
...
wheel hub reinforced: with a negative camber angle.
wheel hub reinforced v2: very reinforced model, with a neutral camber angle.
thingiverse
free
Adaptor_1.25inch_PVC by blerghcity
...it nicely on a 1.25" pvc pipe. the outer diameter of the adaptor has also been scaled to fit snugly on a aio robotics spool.
thingiverse
free
Camera dolly wheel mount for skateboard wheels by timpworx
..., bolt them onto an mdf or plywood baseplate, and mount the wheels. choose angled metal, pvc, abs, or conduit pipes and go shoot!
thingiverse
free
Geodesic Dome 4V Connector for 3/4" PVC pipe by Simhopp
...-scale to 129%
need to lay flat and print.
recommend #6 self drilling pan head screws for securing pvc pipes to these connectors.
thingiverse
free
Wltoys A959b rear wheel hub by tiagoweller
...
wheel hub reinforced: with a negative camber angle.
wheel hub reinforced v2: very reinforced model, with a neutral camber angle.
thingiverse
free
Waste tank drainpipe to hose connector by OmiPops
... gardena hose to be fitted for easier disposal (we use a 20m hose). you can also use the hose to flush the tank with fresh water.
thingiverse
free
Geodesic Dome 4V Connector for 1" PVC pipe by Simhopp
...ically.
for 3/4" pipe, re-scale to 77.5% (not 75%)
for 1/2" pipe, re-scale to 57% (not 50%)
need to lay flat and print.
Ock10
thingiverse
free
GIJOE Rattler Rear Landing Gear by ock10
...gijoe rattler rear landing gear by ock10
thingiverse
replacement rear landing gear for the 1984 cobra rattler
thingiverse
free
Binocular caps 47mm by ock10
...with 47mm diameters. the ribs in the caps were designed with a 0.1 mm interference fit, or 46.8mm diameter, and printed in petg.
thingiverse
free
Tamiya tie rod 1:24 scale by ock10
...miya tie rod 1:24 scale by ock10
thingiverse
replacement tie rod for 1/24 scale tamiya clarion gt-r model i built 19 years ago.
thingiverse
free
Preliminary design for replacement momo force hub by ock10
...cement hub.
fillets and chamfers have not been added yet.
longer m3x45mm screws replace the m3x20mm screws that hold the gear on.
thingiverse
free
Alternate Roberto hands for 100% printing by ock10
...larger with drill bits to 10/32" or 11/64", and the base was filed and sanded after printing to make it look spherical.
thingiverse
free
GIJOE bridge layer repair part by ock10
... be flexed directly, 2 thinner prongs recenter one cylinder after one side has been inserted far enough to get the other side in.
thingiverse
free
Spring seat 3 by ock10
...oil spring in one leg have shrink tube around the middle, maybe so it won't scrape when the middle buckles under compression.
thingiverse
free
Spring seat 1 by ock10
...oil spring in one leg have shrink tube around the middle, maybe so it won't scrape when the middle buckles under compression.
thingiverse
free
Mamiya RB67 Rear Lens Cap by ock10
... the interference fit to 0.1mm after shrinkage, and did not require any dremeling to fit on the lens after being printed in petg.
Spacer
turbosquid
$55
Spacer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$60
grendizer & double spacer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Hex Spacers M3 Male-Female
... spacers m3 male-female
3dexport
hex spacers m3 male-female with length from 5mm to 60mm for printed circuit boards. step files.
3d_export
$5
industrial lift - spacer crane
...crane<br>- 500 kg<br>- render 3ds max 2020 and corona renderer.<br>- formats: max 2020, max 2017, obj, fbx, stp
3d_export
$5
spacer hanging light
...lampshades: any total number of lamps: 6 polys: 18 546 verts: 19 045 https://imperiumloft.ru/lyustry-175/ev_a048924-eurosvet.html
turbosquid
$5
Industrial lift Spacer crane Renaissance construction
...naissance construction for download as max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1571898)
3d_export
$7
industrial lift - spacer crane renaissance construction
...ction<br>- 750 kg<br>- render 3ds max 2020 and corona renderer.<br>- formats: max 2020, max 2017, obj, fbx, stp
3d_export
$10
Spacer Sliding Wardrobe 1200 Hanger
...painter available for all software<br>ue4. ue5. blender. maya. 3d max. unity. c4d.<br>formats: .obj .gltf .fbx .blend
3d_export
$5
Hockey puck 3D Model
...hockey puck 3d model 3dexport hockey puck spacer washer disk shim hockey puck 3d model gizmo_fbi 28754...
3d_export
$5
Front 30mm Lift Kit for 1996-2004 Nissan Pathfinder and 1997-2003 Infiniti QX4
...terrano r50, regulus 1997-2003 infiniti qx4 - front strut spacer ...
1
turbosquid
$69
armchairs(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
ring 1+1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Chair(1)(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
RING 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
house 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Table 1(1)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Formula 1(1)
...lty free 3d model formula 1 for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1567088)
design_connected
$11
No 1
...no 1
designconnected
sibast no 1 computer generated 3d model. designed by sibast, helge.
turbosquid
$2
desert house(1)(1)
...3d model desert house(1)(1) for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1055095)