Sony NEX SEL18200 Tripod ring mount by pjfian

Last crawled date: 3 years ago

Sony NEX SEL18200 18-200mm lens tripod mount. This mounts to your SEL18200 lens to eliminate the issue some people are having with this heavy lens causing cracking around the NEX series camera tripod mount. You simple mount your quick release plate to this mount and the camera will be a lot more stable and will remove risk of damage to your camera mount. You will require a M3x20 bolt and nut for the top clamp, and a 1/4 20 nut for the bottom mount. Due to different printer tolerances, some nuts may be hard to push into place, but will fit, maybe with a little filing or sanding.
There are 3 files, the one marked rev 1 is an updated version which has been tidied up a little and prints much nicer. (grey one in picture is original, black one is revised design)
The one marked Rev 2 is updated, I found that with the fixing on top it gets in the way of a speedlite, fixing has been moved to the side and a relief added to the top.
Revision 3 coming soon, just to tidy a couple of things up.
Note: This is for the original SEL18200, not the SEL18200LE and not the power zoom version. If you are looking for the SEL18200LE, please see my other items.
Mount shown in my photos are of a slightly older version, will update pictures when i get a chance.