GrabCAD
SNAPON WITH SUGRU PROSTHETIC ARM ADAPTOR
by GrabCAD
Last crawled date: 1 year, 11 months ago
https://www.youtube.com/watch?v=6WSU76WsSaY
The reddish component in the default image is the sugru.
The intention of this entry is to come up with low cost items that could be printed and put on and taken off a lower arm prosthesis easily and be cleaned in a dishwasher. The sugru is a means of attaching various attachments to the snap on adaptors.
The idea is for a user to have multiple attachments; comb, brush, spoon, maybe a set of screw drivers if he or she repairs laptops; a cup holder, magnifying glass etc. Each user would have his or her own set of attachments and add more as needed; a remote for instance.
Each of these attachments would be attached to a female snap on adaptor that snaps onto the male adaptor which is screwed into the arm prosthesis.
A bin would serve to hold attachments for some users; a more sophisticated attachment holding arrangement might be necessary for others
The purpose of the sugru is to allow final design adjustment and to allow using a few print files to fit a broad spectrum of attachments. In addition the user might make this adjustment themselves or at least participate in it.
If time allowed I would have changed the tapered adaptors, male and female, to have the taper removed on the wider end of the adaptor beyond the snap ring. This would allow for easy insertion of the male adaptor while providing a more stable assembly.
I had a previous entry that this was built from that used first magnets and then polymorph in place of sugru. Polymorph might work better for some applications; especially, it could be completed quickly while sugru requires setting time. for items where heat is not a concern it might work well.
The level cup attachment was thought of in this contest; I remembered the hinge challenge and entered a modified version of it there. It is left here as it is just another attachment and is an example that any of the snap on adaptors could be made to work without sugru; the sugru eliminates the need to design each part separately at the computer and lets the user simply do it.
The reddish component in the default image is the sugru.
The intention of this entry is to come up with low cost items that could be printed and put on and taken off a lower arm prosthesis easily and be cleaned in a dishwasher. The sugru is a means of attaching various attachments to the snap on adaptors.
The idea is for a user to have multiple attachments; comb, brush, spoon, maybe a set of screw drivers if he or she repairs laptops; a cup holder, magnifying glass etc. Each user would have his or her own set of attachments and add more as needed; a remote for instance.
Each of these attachments would be attached to a female snap on adaptor that snaps onto the male adaptor which is screwed into the arm prosthesis.
A bin would serve to hold attachments for some users; a more sophisticated attachment holding arrangement might be necessary for others
The purpose of the sugru is to allow final design adjustment and to allow using a few print files to fit a broad spectrum of attachments. In addition the user might make this adjustment themselves or at least participate in it.
If time allowed I would have changed the tapered adaptors, male and female, to have the taper removed on the wider end of the adaptor beyond the snap ring. This would allow for easy insertion of the male adaptor while providing a more stable assembly.
I had a previous entry that this was built from that used first magnets and then polymorph in place of sugru. Polymorph might work better for some applications; especially, it could be completed quickly while sugru requires setting time. for items where heat is not a concern it might work well.
The level cup attachment was thought of in this contest; I remembered the hinge challenge and entered a modified version of it there. It is left here as it is just another attachment and is an example that any of the snap on adaptors could be made to work without sugru; the sugru eliminates the need to design each part separately at the computer and lets the user simply do it.
Similar models
grabcad
free
USER INTERCHANGEABLE PROSTHETIC HAND VERSION 2
...the male portion pulled out. to put it back on the male portion is inserted into the female and the attached assembly lifted out.
grabcad
free
Bicycle Level Cup Holder
.... nylon or abs any color.
the intent is for the adaptor to be used for other things also such as a phone or mirror; whatever.
thingiverse
free
Picatinny male to male and female to female adaptors. by Snorri
...adaptors. by snorri
thingiverse
picatinny male to male and female to female adaptors.
use m3 (m4 might fit too) bolts and nuts.
thingiverse
free
Iron Man Adjustable Length Helper Arms by crashworks3d
..."off" or misaligned. since you can install them and adjust their length to compensate or adjust tension between mounts.
grabcad
free
USER CHANGEABLE PROSTHETIC HAND ATTACHMENTS
...all sorts of attachments could hang on a board similar in principle to a peg board and the user...
thingiverse
free
Cue Stick Bridge Attachment for Prosthetic Adaptor by olsonj19
...e user to play billiards. it effectively guides the movement of the cue stick and holds it in place while the user takes a shot.
thingiverse
free
KB3D-GMS Type-A Male by K_Biologist
...the messenger on here or via my social media.
safety
i personally have tested each item, however you use these at your own risk.
thingiverse
free
KB3D-GMS Type-A Female by K_Biologist
...the messenger on here or via my social media.
safety
i personally have tested each item, however you use these at your own risk.
thingiverse
free
KB3D-GMS Type-A Female by K_Biologist
...the messenger on here or via my social media.
safety
i personally have tested each item, however you use these at your own risk.
3dwarehouse
free
Male-female adaptor
...le-female adaptor #8radt4f381 #accessories_for_suction_cups #adaptors #malefemale_adaptor #sapelem #traceparts #vacuum_components
Snapon
thingiverse
free
Fatshark snapon for spidex v3 by Mrimstad
...fatshark snapon for spidex v3 by mrimstad
thingiverse
snapon mount for spidex v3 and fatshark camera
thingiverse
free
A4000D Front Bezel SnapOn by highpuff
...nt bezel snapon by highpuff
thingiverse
replacement for the snapon's on the amiga 4000d front bezel that is common to break.
thingiverse
free
4omm fan snapon by Flynny
...4omm fan snapon by flynny
thingiverse
another fan cover.
thingiverse
free
Snapon Window Glazing by Javo
...ow glazing by javo
thingiverse
snap on window glazing i made this in the need to fix an old window and the difficulty to find it
thingiverse
free
[4xiDraw] Arduino Grip Snapon by punkrockseb
...ugh the pcb doing fun sparks and blue magic smoke.
made the snapon more tight to be more fixed. harder. better. faster. stronger.
thingiverse
free
SnapOn NEMA17 40mm fan mount by Cyberlamb
...anything to prevent it from sliding off, so i simply added lips to the corners to go over the edges of the back end of the motor.
thingiverse
free
SnapOn Case for S8 Spigen Slim Armor by HAMMER_T
...a lip on the upper part for easier removal.
i also added a version of the vertical part without mount so it can be remixed easier
thingiverse
free
E3D v6 Hotend - 40mm Fan Duct (Snapon) by denos
...d with petg.
it may also work with pla but i haven't verified that. please leave a comment if it works for you.
onshape link
thingiverse
free
MPCNC Primo SnapOn Drag Chain Support by tombond
...there is no need to make it super tight, you'll see.
ps: i also included a step file if someone needs to make a modification.
thingiverse
free
Prusa MK2.5/MK3 Fan Cover, SnapOn by Area51
...trings getting into the fan as any grill can reduce cooling airflow.
>> if you like it, please leave a like or a tip... ;-)
Sugru
thingiverse
free
Sugru Box by jason_atwood
...sugru box by jason_atwood
thingiverse
this is a simple box to keep sugru packets in.
thingiverse
free
Sugru and 3D printed feet for the Ultimaker by Droopas
...pas
thingiverse
print feet and mold sugru on the bottom, use mold to shape the sugru.
see procedure on:https://imgur.com/a/h7djk
thingiverse
free
Alternative Claw - Sugru Grip by MobileMaker
...into the holes so it stays in place. i think i will use a plasitic card to make a cross hatch pattern in the sugru for some grip.
thingiverse
free
Sugru Passport Stamp Handle by jonadair
...dair
thingiverse
a handle for a passport-sized stamp. intended for use with sugru modelable rubber as seen in this instructable.
thingiverse
free
Sugru Experiment by RobotGrrl
...ning the motivation behind the experiment and how it didn't work (for us). let me know if you have any questions/suggestions!
thingiverse
free
Sugru Stamp kit by mattbeechan
...act the threads. helped out a bunch!
printer: metal printrbot simple
resolution: 0.25mm layer height
filament: 1.75mm white pla
thingiverse
free
Sugru Fixbot by mikevanis
...d this quirky happy robot!
fixbot video:http://youtu.be/azhi2yfsjvu
instructables:http://www.instructables.com/id/ebjzvmch5y9wd94
thingiverse
free
Rubber Foot Mould for Speakers by sugru
...hours.
that's it! share the mould with your friends or think about other objects that you could put these rubber feet onto...
thingiverse
free
3D printing + sugru = precision rubber parts - iPhone 4/4S or 5 molds by sugru
...39;re giving free sugru to the very best ideas.
what would you like to try?
get in touch touch via email to james@sugru.com
thingiverse
free
Mini Quadruped - optimized for 9G servos - Sugru Feet by MobileMaker
... a quick mod of my own to use with sugru as the feet.
i got the idea from the sugru fixbot where the notches are on the finger.
Prosthetic
turbosquid
$49
Prosthetic Arm
...uid
royalty free 3d model prosthetic arm for download as max on turbosquid: 3d models for games, architecture, videos. (1556291)
turbosquid
$20
Prosthetic for small dogs 3D print model v2
...osthesis for small dogs 3d print model v2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1290474)
3d_export
$10
knee joint prosthesis with guides sample of individual prosthetics
...mm, 20 grams tibial component: ti6al4v material, 76×77×70 mm, 90 grams femoral component: cocrmo material, 70×52×62 mm, 290 grams
3d_export
$5
individual tmj prosthesis real operation
...left tmj. it consists of the following parts:: * prosthetic condylar process (ti6al4v); * joint cavity prosthesis (high molecular...
3d_export
$44
Hip Replacement
...damaged bone and cartilage is removed and replaced with prosthetic components. the damaged femoral head is removed and replaced...
3d_export
$10
itap implant osteointegration operation
...the implant. tested on more than 15 operations. itap prosthetic is an installation of "intraosseous transcutaneous amputation prosthesis". in...
thingiverse
free
Prosthetic arm
...prosthetic arm
thingiverse
prosthetics arm
3d printable
thingiverse
free
Prosthetic Arm
...prosthetic arm
thingiverse
a prosthetic arm purely for asthetic purposes. it was made for a client's wedding.
thingiverse
free
Dog Prosthetic by 3DESIGNER27
...animal allies. cheap alternative for dog prosthetic limb. scale in your slicer to fit the dog you are looking to apply prosthetic
thingiverse
free
XOR Prosthetic Hand by chandlersupple
...xor prosthetic hand by chandlersupple
thingiverse
prosthetic hand - two part
Adaptor
turbosquid
$15
Adaptor-2
...alty free 3d model adaptor-2model for download as dwg and ige on turbosquid: 3d models for games, architecture, videos. (1710809)
turbosquid
free
Adaptor plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male DFP adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Female VGA Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male VGA Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Memory stick adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
male union tee adaptor
...ame is male union tee adaptor , it is used in home and industrial area . if you want to get yhis parts blue print buy it from me
turbosquid
$20
Male M1 Digital Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male M1 Digital & Analog Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Samsung Travel Adapter 3D Model
...samsung travel adapter 3d model 3dexport charger white travel adaptor battery charging device samsung travel adapter 3d model g.lex...
Arm
archibase_planet
free
Arm
...ase planet
arm hand right hand skeleton
arm human skeleton right arm n030515 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
3ddd
$1
arm chair
...arm chair
3ddd
arm chair , пуф
arm chair
turbosquid
$5
arm
...arm
turbosquid
royalty free 3d model arm for download as obj on turbosquid: 3d models for games, architecture, videos. (1306158)
turbosquid
free
Arm
...arm
turbosquid
free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1346955)
turbosquid
$29
Arm
...osquid
royalty free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1382436)
3d_export
$5
coat of arms
...coat of arms
3dexport
coat of arms
3ddd
$1
ARM SOFA
...arm sofa
3ddd
arm sofa
3ddd
$1
Arm chair
...arm chair
3ddd
arm chair
3ddd
$1
Arm chair
...arm chair
3ddd
угловое
arm chair
3ddd
$1
ARM CHAIR
...arm chair
3ddd
arm chair clothes