Smart Display-Box with kinetik arm, MicroSD-Cardholder and Reset-Safe by IGINIMIDI

Last crawled date: 3 years ago

This is my kinetk Displayholder for the Anet 12864 Display. It have a 3-Piece-MicroSD-Card-Holder, a safer Resetbutton and a bigger Wheel for comfortably use. The arm for my older 5-Botton kinetic arm holder is smaler then this one. You need two M8 x 60mm Screews, and two M8 x 40mm. For every bold one shim and one blasting disc. A nut SW14 fits into the flange, two other are self-locking-nuts. In one of the Displayjoints i make a M8 thread, in the other you can cut this self. Then you need M3 threads in the DisplayBox or use Screews where cut self. Sorry for my english ;)
The Safe-Buttonplate for the Resetbutton must drill 1,2mm also the mount for this. Fit before you drill. Then glued with plastikglue on the Box.
The big wheel for the knob is whery cool, the little knob must fit with the pin. When you want, you can fit the IGINIMIDI-Medallion or make your own.
For the arms, make the wall-thickness better to 2mm.
And then, at least, you can fit a clock with temperaturdisplay at the Displaybox. Two arms you can use, one with 30° or the other one with 60°. This diy clock kit you can find at amazon for 10€. You must solding it self.
The Document with instructions ist in german and english, please, i try to translate ;-)
Read it befor build.
In cura you must rotate some things, i seen this to late. Display-Gelenk, Display-Smart-Final-Tr and ResetSafe.
I hope, i have not forget anything.
Have fun, greetings IGINIMIDI
UPDATE 25.06.2017
I have make a better safe-Resetbutton. Now you can flip a Button after opening. So you can push faster, by the older Version it was twicky to push the button. See the new pic.
Feels like start an ICBM ;)
New Files:
ResetSafeBlockFull.stl
ResetSafeBlockTaster.stl
You must carefully drill this small pieces!