Smart Card Holder by thomps22

Last crawled date: 3 years ago

UPDATE 2018-05-12. Added v3 which has shorter overlap with the smart card so it can be used on laptops with integral card reader. Oriented part so it will print vertically. You may find the holder a tad loose depending on print settings so I recommend a little bit of silicone, double side tape, white glue etc to hold card in securely but not permanently.
Make sure you orient the part vertically so the top of the card holder is touching the bed! I've included my print settings below and have printed a number of these for use at work to hold your smart card and be able to insert it in your computer.
0.21250 layer thickness
0.8mm shell thickness
0.7875 bottom/top thickness
25% infill
20mm/s print speed
210C print temp
50C bed temp
Support = touching buildplate (lines, 60, 15%, 0.7, 0.15)
Brim - 5 lines